successfully added to cart
View Cart

Notifications

Mark all as read

KM™システム

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1348)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1344)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1344)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1344)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1344)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1344)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1348)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1348)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1348)
  • K Cast Iron (1370)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1370)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1370)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1368)
  • N Non-Ferrous Materials (1306)
    • N1
      Wrought Aluminum
      (1290)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1286)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (877)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1292)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1278)
    • N6
      Carbon, Graphite Composites, CFRP
      (1196)
    • N7
      MMC's
      (1219)
  • S High-Temp Alloys (1369)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1367)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1369)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1367)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1342)
  • H Hardened Materials (1206)
    • H1
      Hardened Materials 44-48 HRC
      (1206)
    • H2
      Hardened Materials 48-55 HRC
      (1124)
    • H3
      Hardened Materials 56-60 HRC
      (1029)
    • H4
      Hardened Materials >60 HRC
      (982)
Applications
Applications
  • Chamfer Turning Chamfer Turning (44)
  • Convex Drilling Convex Drilling (7)
  • Cut-Off Cut-Off (41)
  • Deep Grooving Deep Grooving (41)
  • Drilling Drilling (7)
  • Face Grooving Face Grooving (41)
  • Facing Facing (755)
  • Grooving Grooving (163)
  • ID Facing ID Facing (6)
  • ID Grooving ID Grooving (74)
  • ID Thread Turning ID Thread Turning (128)
  • Inclined Entry Drilling Inclined Entry Drilling (7)
  • Inclined Exit Drilling Inclined Exit Drilling (7)
  • Multiple Direction Cutting Multiple Direction Cutting (902)
  • OD Thread Turning OD Thread Turning (158)
  • Plunge Turning Plunge Turning (50)
  • Profiling Profiling (747)
  • TRN Boring TRN Boring (715)
  • Threading Threading (179)
  • Turning Turning (997)
  • X-Offset Drilling X-Offset Drilling (7)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 27.0 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (196)
  • ACME (148)
  • API (99)
  • API BUTTRESS (16)
  • API RD (106)
  • BSPT (55)
  • BSW (125)
  • BUTTRESS (125)
  • M (147)
  • NPT (109)
  • NPTF (55)
  • RD DIN 405 (66)
  • STUB ACME (120)
  • TR DIN 103 (66)
  • UN (180)
  • UNJ (109)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1222)
  • Interrupted (686)
  • Lightly Interrupted Cut (1222)
  • Smooth Cut (1224)
  • Varying Depth of Cut (1224)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 81.0 mm (1)
  • 85.726 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.074 in (1)
  • 0.082 in (1)
  • 0.089 in (1)
  • 0.096 in (1)
  • 0.104 in (1)
  • 0.111 in (1)
  • 0.119 in (1)
  • 0.126 in (1)
  • 0.133 in (1)
  • 0.135 in (1)
  • 0.145 in (1)
  • 0.148 in (1)
  • 0.162 in (1)
  • 0.177 in (1)
  • 0.192 in (1)
  • 0.208 in (1)
  • 0.221 in (1)
  • 0.237 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.213 in (1)
  • 4.331 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min to Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 107.0 mm (1)
  • 110.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (65)
  • 48.0 (14)
  • 49.783 (3)
  • 50.0 (3)
  • 61.0 (2)
  • 62.5 (20)
  • 63.0 (8)
  • 72.5 (3)
  • 75.0 (143)
  • 85.0 (4)
  • 90.0 (359)
  • 93.0 (354)
  • 95.0 (341)
  • 107.5 (82)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (973)
Number of Flutes
Number of Flutes
  • 2 (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (863)
  • 2.0 (912)
  • 3.0 (249)
  • 4.0 (765)
  • 6.0 (130)
  • 8.0 (433)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.03 in (66)
  • 0.033 in (3)
  • 0.038 in (126)
  • 0.051 in (81)
  • 0.056 in (11)
  • 0.057 in (28)
  • 0.066 in (54)
  • 0.07 in (25)
  • 0.071 in (13)
  • 0.076 in (164)
  • 0.08 in (126)
  • 0.081 in (14)
  • 0.082 in (13)
  • 0.085 in (13)
  • 0.086 in (13)
  • 0.089 in (45)
  • 0.09 in (45)
  • 0.091 in (13)
  • 0.094 in (54)
  • 0.097 in (42)
  • 0.1 in (689)
  • 0.102 in (477)
  • 0.108 in (14)
  • 0.116 in (26)
  • 0.117 in (28)
  • 0.127 in (54)
  • 0.13 in (4)
  • 0.131 in (54)
  • 0.132 in (54)
  • 0.133 in (54)
  • 0.135 in (13)
  • 0.15 in (57)
  • 0.152 in (79)
  • 0.157 in (54)
  • 0.159 in (13)
  • 0.16 in (40)
  • 0.165 in (80)
  • 0.173 in (54)
  • 0.178 in (73)
  • 0.18 in (6)
  • 0.185 in (22)
  • 0.19 in (125)
  • 0.191 in (125)
  • 0.198 in (54)
  • 0.2 in (765)
  • 0.202 in (76)
  • 0.203 in (475)
  • 0.21 in (25)
  • 0.223 in (13)
  • 0.224 in (54)
  • 0.225 in (3)
  • 0.235 in (54)
  • 0.24 in (13)
  • 0.244 in (26)
  • 0.25 in (76)
  • 0.251 in (54)
  • 0.254 in (102)
  • 0.269 in (67)
  • 0.279 in (25)
  • 0.282 in (54)
  • 0.284 in (54)
  • 0.3 in (56)
  • 0.305 in (9)
  • 0.31 in (12)
  • 0.315 in (67)
  • 0.318 in (96)
  • 0.33 in (54)
  • 0.34 in (163)
  • 0.343 in (26)
  • 0.356 in (54)
  • 0.38 in (6)
  • 0.381 in (19)
  • 0.394 in (17)
  • 0.396 in (1)
  • 0.397 in (835)
  • 0.4 in (970)
  • 0.404 in (54)
  • 0.406 in (85)
  • 0.43 in (54)
  • 0.432 in (16)
  • 0.445 in (80)
  • 0.472 in (26)
  • 0.49 in (54)
  • 0.5 in (49)
  • 0.508 in (54)
  • 0.51 in (3)
  • 0.533 in (7)
  • 0.565 in (13)
  • 0.57 in (28)
  • 0.572 in (83)
  • 0.575 in (52)
  • 0.6 in (58)
  • 0.64 in (3)
  • 0.7 in (14)
  • 0.75 in (45)
  • 0.76 in (13)
  • 0.787 in (99)
  • 0.79 in (72)
  • 0.791 in (19)
  • 0.792 in (252)
  • 0.794 in (825)
  • 0.795 in (1)
  • 0.8 in (1063)
  • 0.826 in (5)
  • 0.84 in (4)
  • 0.902 in (80)
  • 0.93 in (5)
  • 0.936 in (14)
  • 0.97 in (3)
  • 1.0 in (111)
  • 1.01 in (4)
  • 1.06 in (8)
  • 1.188 in (59)
  • 1.19 in (155)
  • 1.191 in (762)
  • 1.194 in (99)
  • 1.195 in (28)
  • 1.2 in (971)
  • 1.25 in (99)
  • 1.404 in (5)
  • 1.5 in (108)
  • 1.515 in (4)
  • 1.525 in (9)
  • 1.585 in (54)
  • 1.587 in (143)
  • 1.588 in (652)
  • 1.59 in (22)
  • 1.6 in (770)
  • 1.75 in (99)
  • 1.98 in (28)
  • 1.981 in (54)
  • 2.0 in (84)
  • 2.025 in (4)
  • 2.25 in (80)
  • 2.38 in (45)
  • 2.381 in (133)
  • 2.388 in (80)
  • 2.39 in (13)
  • 2.4 in (272)
  • 2.5 in (28)
  • 2.525 in (2)
  • 3.175 in (26)
  • 3.18 in (42)
  • 3.2 in (116)
  • 4.0 in (29)
  • 4.7625 in (2)
  • 5.0 in (19)
  • 6.0 in (19)
  • 6.35 in (11)
  • 8.0 in (1)
  • 10.0 in (3)
  • 12.5 in (5)
  • 16.0 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (66)
  • 0.033 mm (3)
  • 0.038 mm (126)
  • 0.051 mm (81)
  • 0.056 mm (11)
  • 0.057 mm (28)
  • 0.066 mm (54)
  • 0.07 mm (25)
  • 0.071 mm (13)
  • 0.076 mm (164)
  • 0.08 mm (126)
  • 0.081 mm (14)
  • 0.082 mm (13)
  • 0.085 mm (13)
  • 0.086 mm (13)
  • 0.089 mm (45)
  • 0.09 mm (45)
  • 0.091 mm (13)
  • 0.094 mm (54)
  • 0.097 mm (42)
  • 0.1 mm (689)
  • 0.102 mm (477)
  • 0.108 mm (14)
  • 0.116 mm (26)
  • 0.117 mm (28)
  • 0.127 mm (54)
  • 0.13 mm (4)
  • 0.131 mm (54)
  • 0.132 mm (54)
  • 0.133 mm (54)
  • 0.135 mm (13)
  • 0.15 mm (57)
  • 0.152 mm (79)
  • 0.157 mm (54)
  • 0.159 mm (13)
  • 0.16 mm (40)
  • 0.165 mm (80)
  • 0.173 mm (54)
  • 0.178 mm (73)
  • 0.18 mm (6)
  • 0.185 mm (22)
  • 0.19 mm (125)
  • 0.191 mm (125)
  • 0.198 mm (54)
  • 0.2 mm (765)
  • 0.202 mm (76)
  • 0.203 mm (475)
  • 0.21 mm (25)
  • 0.223 mm (13)
  • 0.224 mm (54)
  • 0.225 mm (3)
  • 0.235 mm (54)
  • 0.24 mm (13)
  • 0.244 mm (26)
  • 0.25 mm (76)
  • 0.251 mm (54)
  • 0.254 mm (102)
  • 0.269 mm (67)
  • 0.279 mm (25)
  • 0.282 mm (54)
  • 0.284 mm (54)
  • 0.3 mm (56)
  • 0.305 mm (9)
  • 0.31 mm (12)
  • 0.315 mm (67)
  • 0.318 mm (96)
  • 0.33 mm (54)
  • 0.34 mm (163)
  • 0.343 mm (26)
  • 0.356 mm (54)
  • 0.38 mm (6)
  • 0.381 mm (19)
  • 0.394 mm (17)
  • 0.396 mm (1)
  • 0.397 mm (835)
  • 0.4 mm (970)
  • 0.404 mm (54)
  • 0.406 mm (85)
  • 0.43 mm (54)
  • 0.432 mm (16)
  • 0.445 mm (80)
  • 0.472 mm (26)
  • 0.49 mm (54)
  • 0.5 mm (49)
  • 0.508 mm (54)
  • 0.51 mm (3)
  • 0.533 mm (7)
  • 0.565 mm (13)
  • 0.57 mm (28)
  • 0.572 mm (83)
  • 0.575 mm (52)
  • 0.6 mm (58)
  • 0.64 mm (3)
  • 0.7 mm (14)
  • 0.75 mm (45)
  • 0.76 mm (13)
  • 0.787 mm (99)
  • 0.79 mm (72)
  • 0.791 mm (19)
  • 0.792 mm (252)
  • 0.794 mm (825)
  • 0.795 mm (1)
  • 0.8 mm (1063)
  • 0.826 mm (5)
  • 0.84 mm (4)
  • 0.902 mm (80)
  • 0.93 mm (5)
  • 0.936 mm (14)
  • 0.97 mm (3)
  • 1.0 mm (111)
  • 1.01 mm (4)
  • 1.06 mm (8)
  • 1.188 mm (59)
  • 1.19 mm (155)
  • 1.191 mm (762)
  • 1.194 mm (99)
  • 1.195 mm (28)
  • 1.2 mm (971)
  • 1.25 mm (99)
  • 1.404 mm (5)
  • 1.5 mm (108)
  • 1.515 mm (4)
  • 1.525 mm (9)
  • 1.585 mm (54)
  • 1.587 mm (143)
  • 1.588 mm (652)
  • 1.59 mm (22)
  • 1.6 mm (770)
  • 1.75 mm (99)
  • 1.98 mm (28)
  • 1.981 mm (54)
  • 2.0 mm (84)
  • 2.025 mm (4)
  • 2.25 mm (80)
  • 2.38 mm (45)
  • 2.381 mm (133)
  • 2.388 mm (80)
  • 2.39 mm (13)
  • 2.4 mm (272)
  • 2.5 mm (28)
  • 2.525 mm (2)
  • 3.175 mm (26)
  • 3.18 mm (42)
  • 3.2 mm (116)
  • 4.0 mm (29)
  • 4.7625 mm (2)
  • 5.0 mm (19)
  • 6.0 mm (19)
  • 6.35 mm (11)
  • 8.0 mm (1)
  • 10.0 mm (3)
  • 12.5 mm (5)
  • 16.0 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Interrupted (18)
  • Stable (18)
  • Unstable (18)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (608)
  • 241 (143)
  • AC5 (7)
  • ALO (6)
  • C2 (6)
  • C3 (6)
  • CBN6 (6)
  • CG4 (3)
  • CG5 (39)
  • CG6 (9)
  • CL4 (410)
  • CM1 (39)
  • CM2 (606)
  • CM3 (444)
  • CM4 (285)
  • CM5 (7)
  • CPD1 (6)
  • CPX (593)
  • CS5 (18)
  • CW2 (281)
  • CW2015 (531)
  • CW3020 (15)
  • CW5025 (596)
  • GH1 (36)
  • GX (301)
  • HCK10 (63)
  • HCK20 (14)
  • HCM15 (3)
  • HK1500 (478)
  • HK35 (57)
  • HT2 (413)
  • HTX (292)
  • HWK10 (22)
  • HWK15 (66)
  • K00326 (29)
  • K00331 (27)
  • K060 (366)
  • K090 (684)
  • K1 (237)
  • K1010P (36)
  • K1025 (4)
  • K10M (808)
  • K10P (742)
  • K10U (716)
  • K15 (35)
  • K15U (707)
  • K20K (816)
  • K21 (329)
  • K25M (736)
  • K25P (727)
  • K2885 (99)
  • K313 (1173)
  • K35P (475)
  • K420 (736)
  • K45 (428)
  • K4H (77)
  • K6 (9)
  • K68 (1082)
  • K8735 (29)
  • KB1340 (265)
  • KB1345 (442)
  • KB1610 (598)
  • KB1625 (484)
  • KB1630 (494)
  • KB5610 (502)
  • KB5625 (595)
  • KB5630 (402)
  • KB9610 (721)
  • KB9640 (330)
  • KBH10 (661)
  • KBH10B (436)
  • KBH20 (717)
  • KBH20B (436)
  • KBK35 (151)
  • KBK45 (11)
  • KC210 (516)
  • KC250 (604)
  • KC5010 (1277)
  • KC5020P (70)
  • KC5025 (1259)
  • KC5035 (2)
  • KC525M (47)
  • KC5410 (1055)
  • KC5510 (762)
  • KC5525 (499)
  • KC710 (330)
  • KC7140 (18)
  • KC720 (1002)
  • KC7215 (18)
  • KC722 (298)
  • KC7225 (18)
  • KC725M (382)
  • KC730 (1101)
  • KC7310 (821)
  • KC7315 (12)
  • KC732 (828)
  • KC735M (19)
  • KC7815 (18)
  • KC7820 (12)
  • KC7845 (6)
  • KC792M (3)
  • KC7935 (18)
  • KC8050 (1069)
  • KC810 (1165)
  • KC850 (1197)
  • KC9010 (907)
  • KC9025 (1050)
  • KC910 (1061)
  • KC9105 (956)
  • KC9110 (1220)
  • KC9120 (1027)
  • KC9125 (1095)
  • KC9125RR (72)
  • KC9140 (803)
  • KC9145 (711)
  • KC915M (22)
  • KC920M (3)
  • KC9210 (109)
  • KC9215 (773)
  • KC9225 (1024)
  • KC9240 (1021)
  • KC9240NEW (1011)
  • KC9245 (772)
  • KC925M (51)
  • KC930M (4)
  • KC9315 (1037)
  • KC9320 (1097)
  • KC9325 (927)
  • KC935 (1168)
  • KC950 (1057)
  • KC990 (973)
  • KCD25 (342)
  • KCK05 (1020)
  • KCK05B (860)
  • KCK15 (950)
  • KCK15B (993)
  • KCK20 (1112)
  • KCK20B (1127)
  • KCM15 (976)
  • KCM15B (910)
  • KCM25 (1044)
  • KCM25B (968)
  • KCM35 (875)