Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

PSC 50

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (119)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (119)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (119)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (119)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (119)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (119)
  • M Stainless Steel (119)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (119)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (119)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (119)
  • K Cast Iron (119)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (119)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (119)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (119)
  • N Non-Ferrous Materials (117)
    • N1
      Wrought Aluminum
      (115)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (115)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (77)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (116)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (103)
    • N7
      MMC's
      (110)
  • S High-Temp Alloys (119)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (119)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (119)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (119)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (119)
  • H Hardened Materials (104)
    • H1
      Hardened Materials 44-48 HRC
      (104)
    • H2
      Hardened Materials 48-55 HRC
      (95)
    • H3
      Hardened Materials 56-60 HRC
      (89)
    • H4
      Hardened Materials >60 HRC
      (87)
Applications
Applications
  • Facing Facing (94)
  • Grooving Grooving (8)
  • ID Facing ID Facing (88)
  • ID Grooving ID Grooving (12)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (94)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (42)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (88)
  • Turning Turning (94)
Type of Thread
Type of Thread
  • 55 (10)
  • 60 (25)
  • ACME (23)
  • API (16)
  • API BUTTRESS (3)
  • API RD (17)
  • BSPT (7)
  • BSW (20)
  • BUTTRESS (15)
  • M (22)
  • NPT (17)
  • NPTF (7)
  • RD DIN 405 (10)
  • STUB ACME (20)
  • TR DIN 103 (10)
  • UN (22)
  • UNJ (17)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (105)
  • Interrupted (55)
  • Lightly Interrupted Cut (105)
  • Smooth Cut (105)
  • Varying Depth of Cut (105)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (4)
  • 62.5 (1)
  • 72.5 (1)
  • 75.0 (8)
  • 90.0 (25)
  • 93.0 (32)
  • 95.0 (37)
  • 107.5 (11)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (75)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (82)
  • 2.0 (97)
  • 3.0 (13)
  • 4.0 (69)
  • 6.0 (5)
  • 8.0 (37)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.03 in (6)
  • 0.038 in (25)
  • 0.051 in (11)
  • 0.056 in (2)
  • 0.057 in (6)
  • 0.066 in (10)
  • 0.07 in (5)
  • 0.071 in (1)
  • 0.076 in (20)
  • 0.08 in (16)
  • 0.081 in (3)
  • 0.082 in (1)
  • 0.085 in (1)
  • 0.086 in (1)
  • 0.089 in (2)
  • 0.09 in (2)
  • 0.091 in (1)
  • 0.094 in (10)
  • 0.097 in (9)
  • 0.1 in (71)
  • 0.102 in (49)
  • 0.108 in (3)
  • 0.116 in (4)
  • 0.117 in (6)
  • 0.127 in (10)
  • 0.131 in (10)
  • 0.132 in (10)
  • 0.133 in (10)
  • 0.135 in (1)
  • 0.15 in (10)
  • 0.152 in (15)
  • 0.157 in (10)
  • 0.159 in (1)
  • 0.16 in (6)
  • 0.165 in (13)
  • 0.173 in (10)
  • 0.178 in (11)
  • 0.185 in (2)
  • 0.19 in (15)
  • 0.191 in (15)
  • 0.198 in (10)
  • 0.2 in (74)
  • 0.202 in (12)
  • 0.203 in (41)
  • 0.21 in (5)
  • 0.223 in (1)
  • 0.224 in (10)
  • 0.235 in (10)
  • 0.24 in (1)
  • 0.244 in (4)
  • 0.25 in (12)
  • 0.251 in (10)
  • 0.254 in (15)
  • 0.269 in (11)
  • 0.279 in (2)
  • 0.282 in (10)
  • 0.284 in (10)
  • 0.3 in (10)
  • 0.305 in (1)
  • 0.31 in (1)
  • 0.315 in (10)
  • 0.318 in (14)
  • 0.33 in (10)
  • 0.34 in (24)
  • 0.343 in (3)
  • 0.356 in (10)
  • 0.381 in (1)
  • 0.397 in (77)
  • 0.4 in (85)
  • 0.404 in (10)
  • 0.406 in (10)
  • 0.43 in (10)
  • 0.432 in (3)
  • 0.445 in (13)
  • 0.472 in (4)
  • 0.49 in (10)
  • 0.5 in (2)
  • 0.508 in (10)
  • 0.533 in (2)
  • 0.57 in (6)
  • 0.572 in (13)
  • 0.575 in (7)
  • 0.6 in (3)
  • 0.7 in (3)
  • 0.75 in (2)
  • 0.76 in (1)
  • 0.787 in (12)
  • 0.79 in (3)
  • 0.791 in (8)
  • 0.792 in (32)
  • 0.794 in (70)
  • 0.8 in (92)
  • 0.902 in (13)
  • 0.93 in (1)
  • 0.936 in (3)
  • 1.0 in (12)
  • 1.01 in (1)
  • 1.188 in (14)
  • 1.19 in (18)
  • 1.191 in (56)
  • 1.194 in (12)
  • 1.195 in (6)
  • 1.2 in (91)
  • 1.25 in (12)
  • 1.404 in (1)
  • 1.5 in (12)
  • 1.515 in (1)
  • 1.585 in (10)
  • 1.587 in (18)
  • 1.588 in (50)
  • 1.6 in (63)
  • 1.75 in (12)
  • 1.98 in (6)
  • 1.981 in (10)
  • 2.0 in (13)
  • 2.25 in (13)
  • 2.38 in (4)
  • 2.381 in (2)
  • 2.388 in (13)
  • 2.39 in (3)
  • 2.4 in (14)
  • 2.5 in (3)
  • 3.175 in (3)
  • 3.2 in (4)
  • 6.35 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (6)
  • 0.038 mm (25)
  • 0.051 mm (11)
  • 0.056 mm (2)
  • 0.057 mm (6)
  • 0.066 mm (10)
  • 0.07 mm (5)
  • 0.071 mm (1)
  • 0.076 mm (20)
  • 0.08 mm (16)
  • 0.081 mm (3)
  • 0.082 mm (1)
  • 0.085 mm (1)
  • 0.086 mm (1)
  • 0.089 mm (2)
  • 0.09 mm (2)
  • 0.091 mm (1)
  • 0.094 mm (10)
  • 0.097 mm (9)
  • 0.1 mm (71)
  • 0.102 mm (49)
  • 0.108 mm (3)
  • 0.116 mm (4)
  • 0.117 mm (6)
  • 0.127 mm (10)
  • 0.131 mm (10)
  • 0.132 mm (10)
  • 0.133 mm (10)
  • 0.135 mm (1)
  • 0.15 mm (10)
  • 0.152 mm (15)
  • 0.157 mm (10)
  • 0.159 mm (1)
  • 0.16 mm (6)
  • 0.165 mm (13)
  • 0.173 mm (10)
  • 0.178 mm (11)
  • 0.185 mm (2)
  • 0.19 mm (15)
  • 0.191 mm (15)
  • 0.198 mm (10)
  • 0.2 mm (74)
  • 0.202 mm (12)
  • 0.203 mm (41)
  • 0.21 mm (5)
  • 0.223 mm (1)
  • 0.224 mm (10)
  • 0.235 mm (10)
  • 0.24 mm (1)
  • 0.244 mm (4)
  • 0.25 mm (12)
  • 0.251 mm (10)
  • 0.254 mm (15)
  • 0.269 mm (11)
  • 0.279 mm (2)
  • 0.282 mm (10)
  • 0.284 mm (10)
  • 0.3 mm (10)
  • 0.305 mm (1)
  • 0.31 mm (1)
  • 0.315 mm (10)
  • 0.318 mm (14)
  • 0.33 mm (10)
  • 0.34 mm (24)
  • 0.343 mm (3)
  • 0.356 mm (10)
  • 0.381 mm (1)
  • 0.397 mm (77)
  • 0.4 mm (85)
  • 0.404 mm (10)
  • 0.406 mm (10)
  • 0.43 mm (10)
  • 0.432 mm (3)
  • 0.445 mm (13)
  • 0.472 mm (4)
  • 0.49 mm (10)
  • 0.5 mm (2)
  • 0.508 mm (10)
  • 0.533 mm (2)
  • 0.57 mm (6)
  • 0.572 mm (13)
  • 0.575 mm (7)
  • 0.6 mm (3)
  • 0.7 mm (3)
  • 0.75 mm (2)
  • 0.76 mm (1)
  • 0.787 mm (12)
  • 0.79 mm (3)
  • 0.791 mm (8)
  • 0.792 mm (32)
  • 0.794 mm (70)
  • 0.8 mm (92)
  • 0.902 mm (13)
  • 0.93 mm (1)
  • 0.936 mm (3)
  • 1.0 mm (12)
  • 1.01 mm (1)
  • 1.188 mm (14)
  • 1.19 mm (18)
  • 1.191 mm (56)
  • 1.194 mm (12)
  • 1.195 mm (6)
  • 1.2 mm (91)
  • 1.25 mm (12)
  • 1.404 mm (1)
  • 1.5 mm (12)
  • 1.515 mm (1)
  • 1.585 mm (10)
  • 1.587 mm (18)
  • 1.588 mm (50)
  • 1.6 mm (63)
  • 1.75 mm (12)
  • 1.98 mm (6)
  • 1.981 mm (10)
  • 2.0 mm (13)
  • 2.25 mm (13)
  • 2.38 mm (4)
  • 2.381 mm (2)
  • 2.388 mm (13)
  • 2.39 mm (3)
  • 2.4 mm (14)
  • 2.5 mm (3)
  • 3.175 mm (3)
  • 3.2 mm (4)
  • 6.35 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (49)
  • 241 (18)
  • CL4 (40)
  • CM2 (44)
  • CM3 (40)
  • CM4 (25)
  • CPX (46)
  • CW2 (32)
  • CW2015 (49)
  • CW5025 (54)
  • GH1 (3)
  • GX (26)
  • HCK10 (12)
  • HCK20 (3)
  • HK1500 (66)
  • HK35 (4)
  • HT2 (62)
  • HTX (40)
  • HWK15 (12)
  • K00326 (4)
  • K00331 (4)
  • K060 (23)
  • K090 (53)
  • K1 (23)
  • K1010P (3)
  • K10M (68)
  • K10P (56)
  • K10U (65)
  • K15 (6)
  • K15U (65)
  • K20K (61)
  • K21 (26)
  • K25M (69)
  • K25P (63)
  • K2885 (12)
  • K313 (105)
  • K35P (26)
  • K420 (55)
  • K45 (26)
  • K4H (10)
  • K68 (98)
  • K8735 (4)
  • KB1340 (29)
  • KB1345 (44)
  • KB1610 (51)
  • KB1625 (39)
  • KB1630 (44)
  • KB5610 (48)
  • KB5625 (58)
  • KB5630 (45)
  • KB9610 (65)
  • KB9640 (34)
  • KBH10 (65)
  • KBH10B (37)
  • KBH20 (69)
  • KBH20B (37)
  • KBK35 (18)
  • KC210 (42)
  • KC250 (48)
  • KC5010 (115)
  • KC5020P (14)
  • KC5025 (115)
  • KC5410 (93)
  • KC5510 (64)
  • KC5525 (47)
  • KC710 (41)
  • KC720 (83)
  • KC722 (37)
  • KC725M (32)
  • KC730 (100)
  • KC7310 (70)
  • KC732 (69)
  • KC8050 (94)
  • KC810 (105)
  • KC850 (107)
  • KC9010 (78)
  • KC9025 (94)
  • KC910 (92)
  • KC9105 (90)
  • KC9110 (109)
  • KC9120 (91)
  • KC9125 (94)
  • KC9125RR (3)
  • KC9140 (68)
  • KC9145 (56)
  • KC915M (8)
  • KC9210 (14)
  • KC9215 (66)
  • KC9225 (92)
  • KC9240 (88)
  • KC9240NEW (88)
  • KC9245 (66)
  • KC9315 (94)
  • KC9320 (103)
  • KC9325 (77)
  • KC935 (109)
  • KC950 (97)
  • KC990 (80)
  • KCD25 (27)
  • KCK05 (94)
  • KCK05B (81)
  • KCK15 (87)
  • KCK15B (94)
  • KCK20 (101)
  • KCK20B (103)
  • KCM15 (88)
  • KCM15B (92)
  • KCM25 (92)
  • KCM25B (86)
  • KCM35 (78)
  • KCM35B (62)
  • KCP05 (83)
  • KCP05B (71)
  • KCP10 (94)
  • KCP10B (109)
  • KCP15 (10)
  • KCP25 (94)
  • KCP25B (109)
  • KCP30 (90)
  • KCP30B (61)
  • KCP40 (51)
  • KCP40B (67)
  • KCPK05 (62)
  • KCS10 (40)
  • KCS10B (88)
  • KCU10 (109)
  • KCU25 (105)
  • KD050 (53)
  • KD081 (59)
  • KD100 (47)
  • KD120 (43)
  • KD1400 (48)
  • KD1405 (33)
  • KD1425 (62)
  • KM1 (21)
  • KMF (18)
  • KS15 (22)
  • KT1120 (21)
  • KT125 (47)
  • KT150 (30)
  • KT175 (74)
  • KT315 (96)
  • KT325 (62)
  • KT5020 (3)
  • KTP10 (24)
  • KU10 (22)
  • KU10T (90)
  • KU25T (19)
  • KU30T (103)
  • KY1310 (32)
  • KY1320 (54)
  • KY1540 (28)
  • KY1615 (51)
  • KY2000 (32)
  • KY2100 (23)
  • KY3000 (64)
  • KY3400 (37)
  • KY3500 (54)
  • KY4000 (28)
  • KY4300 (29)
  • KY4400 (54)
  • KYHK15B (54)
  • KYK10 (26)
  • KYK25 (37)
  • KYK35 (54)
  • KYS25 (28)
  • KYS30 (31)
  • NL200 (32)
  • NL250 (62)
  • NL300 (46)
  • NL400 (30)
  • NL400S (2)
  • NL920 (56)
  • P25 (27)
  • PB100 (21)
  • PB170 (18)
  • PB250 (21)
  • PB300 (18)
  • PD100 (12)
  • PD50 (4)
  • PN120 (1)
  • PS5 (40)
  • SP0819 (48)
  • SP0A00 (3)
  • SP3019 (49)
  • SP4019 (37)
  • SP4036 (3)
  • SP4066 (2)
  • SP4093 (3)
  • SP61EJ (3)
  • SPADAP (5)
  • SPN3W1 (8)
  • SPSREJ (2)
  • THM (74)
  • THM-X (32)
  • THMF-X (21)
  • TN10P (96)
  • TN10U (65)
  • TN15M (78)
  • TN15U (65)
  • TN2000 (66)
  • TN20K (80)
  • TN20P (90)
  • TN30M (86)
  • TN30P (51)
  • TN4000 (63)
  • TN5015 (70)
  • TN5020 (77)
  • TN5105 (59)
  • TN5120 (79)
  • TN6010 (63)
  • TN6025 (74)
  • TN7005 (68)
  • TN7010 (83)
  • TN7015 (83)
  • TN7025 (83)
  • TN7035 (71)
  • TN7105 (67)
  • TN7110 (94)
  • TN7115 (79)
  • TN7125 (79)
  • TN7135 (71)
  • TN8025 (71)
  • TTI15 (61)
  • TTM (8)
  • TTM09 (3)
  • TTR (32)
  • TTS (49)
  • TTX (54)
  • W00342 (4)
  • WBH10C (64)
  • WBH10P (45)
  • WBH10U (51)
  • WBH20P (55)
  • WBH25P (48)
  • WBH25U (54)
  • WBH30P (45)
  • WBK40U (29)
  • WBK45U (45)
  • WDN00U (28)
  • WDN25U (48)
  • WK05CT (78)
  • WK15CT (63)
  • WK20CT (88)
  • WM15CT (86)
  • WM25CT (86)
  • WM35CT (64)
  • WP05CT (21)
  • WP15CT (88)
  • WP20TT (11)
  • WP25CT (88)
  • WP35CT (88)
  • WS10PT (73)
  • WS25PT (75)
  • WU05PT (12)
  • WU10HT (90)
  • WU10PT (75)
  • WU25PT (79)
  • X00511 (18)
Hand Of Tool
Hand Of Tool
  • L (34)
  • N (2)
  • R (39)
Wiper Insert
Wiper Insert
  • N (119)
  • Y (66)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 20.0 mm (6)
  • 24.0 mm (1)
  • 25.0 mm (5)
  • 32.0 mm (14)
  • 33.0 mm (3)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 40.0 mm (6)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 48.5 mm (1)
  • 50.0 mm (7)
  • 52.5 mm (1)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 63.0 mm (7)
  • 64.0 mm (2)
  • 65.0 mm (6)
  • 65.5 mm (1)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 88.9 mm (2)
  • 110.0 mm (27)
  • 125.0 mm (7)
  • 139.7 mm (2)
  • 165.0 mm (1)
  • 174.6 mm (2)
  • 209.6 mm (1)
  • 222.3 mm (1)
  • 223.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 0.787 in (6)
  • 0.946 in (1)
  • 0.984 in (5)
  • 1.26 in (14)
  • 1.299 in (3)
  • 1.319 in (1)
  • 1.516 in (2)
  • 1.575 in (6)
  • 1.909 in (1)
  • 1.969 in (7)
  • 2.067 in (1)
  • 2.441 in (3)
  • 2.48 in (7)
  • 2.52 in (2)
  • 2.559 in (6)
  • 2.579 in (1)
  • 2.598 in (1)
  • 3.15 in (2)
  • 4.331 in (27)
  • 4.921 in (7)
  • 6.496 in (1)
  • 8.78 in (2)
  • 41.3 in (2)
  • 47.6 in (2)
  • 57.2 in (1)
  • 88.9 in (2)
  • 139.7 in (2)
  • 174.6 in (2)
  • 209.6 in (1)
  • 222.3 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 in (15)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (15)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (23)
  • E (27)
  • S (25)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (42)
  • NEGATIVE-ZERO (15)
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 1.417 in (3)
  • 1.811 in (3)
  • 1.85 in (2)
  • 1.969 in (1)
  • 2.008 in (1)
  • 2.047 in (8)
  • 2.205 in (4)
  • 2.362 in (34)
  • 2.441 in (2)
  • 2.52 in (3)
  • 2.559 in (2)
  • 2.598 in (5)
  • 2.638 in (10)
  • 3.15 in (1)
  • 3.465 in (6)
  • 3.48 in (1)
  • 3.938 in (2)
  • 4.449 in (2)
  • 4.646 in (2)
  • 4.686 in (4)
  • 5.906 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 36.0 mm (3)
  • 46.0 mm (3)
  • 47.0 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (1)
  • 52.0 mm (8)
  • 56.0 mm (4)
  • 60.0 mm (34)
  • 62.0 mm (2)
  • 64.0 mm (3)
  • 65.0 mm (2)
  • 66.0 mm (5)
  • 67.0 mm (10)
  • 80.0 mm (1)
  • 88.0 mm (6)
  • 88.4 mm (1)
  • 100.0 mm (2)
  • 113.0 mm (2)