successfully added to cart
View Cart

Notifications

Mark all as read

PSC 63

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (143)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (143)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (143)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (143)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (143)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (143)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (143)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (143)
  • M Stainless Steel (143)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (143)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (143)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (143)
  • K Cast Iron (143)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (143)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (143)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (143)
  • N Non-Ferrous Materials (143)
    • N1
      Wrought Aluminum
      (143)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (143)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (93)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (140)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (141)
    • N6
      Carbon, Graphite Composites, CFRP
      (136)
    • N7
      MMC's
      (136)
  • S High-Temp Alloys (143)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (143)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (143)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (143)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (143)
  • H Hardened Materials (131)
    • H1
      Hardened Materials 44-48 HRC
      (131)
    • H2
      Hardened Materials 48-55 HRC
      (115)
    • H3
      Hardened Materials 56-60 HRC
      (109)
    • H4
      Hardened Materials >60 HRC
      (103)
Applications
Applications
  • Back Boring Back Boring (1)
  • Facing Facing (100)
  • Grooving Grooving (9)
  • ID Facing ID Facing (84)
  • ID Grooving ID Grooving (9)
  • ID Thread Turning ID Thread Turning (19)
  • Multiple Direction Cutting Multiple Direction Cutting (118)
  • OD Thread Turning OD Thread Turning (3)
  • Plunge Turning Plunge Turning (15)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (84)
  • Turning Turning (107)
Type of Thread
Type of Thread
  • 55 (16)
  • 60 (37)
  • ACME (35)
  • API (23)
  • API BUTTRESS (4)
  • API RD (24)
  • BSPT (12)
  • BSW (28)
  • BUTTRESS (21)
  • M (29)
  • NPT (24)
  • NPTF (12)
  • RD DIN 405 (16)
  • STUB ACME (28)
  • TR DIN 103 (16)
  • UN (33)
  • UNJ (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (123)
  • Interrupted (73)
  • Lightly Interrupted Cut (123)
  • Smooth Cut (123)
  • Varying Depth of Cut (123)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 62.5 (2)
  • 72.5 (2)
  • 75.0 (10)
  • 90.0 (46)
  • 93.0 (33)
  • 95.0 (36)
  • 107.5 (10)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (94)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (94)
  • 2.0 (106)
  • 3.0 (20)
  • 4.0 (78)
  • 6.0 (4)
  • 8.0 (46)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.03 in (9)
  • 0.038 in (18)
  • 0.051 in (18)
  • 0.056 in (5)
  • 0.057 in (6)
  • 0.066 in (12)
  • 0.07 in (10)
  • 0.071 in (1)
  • 0.076 in (28)
  • 0.08 in (20)
  • 0.081 in (5)
  • 0.082 in (1)
  • 0.085 in (1)
  • 0.086 in (1)
  • 0.089 in (2)
  • 0.09 in (2)
  • 0.091 in (1)
  • 0.094 in (12)
  • 0.097 in (11)
  • 0.1 in (63)
  • 0.102 in (59)
  • 0.108 in (5)
  • 0.116 in (6)
  • 0.117 in (6)
  • 0.127 in (12)
  • 0.13 in (1)
  • 0.131 in (12)
  • 0.132 in (12)
  • 0.133 in (12)
  • 0.135 in (1)
  • 0.15 in (12)
  • 0.152 in (22)
  • 0.157 in (12)
  • 0.159 in (1)
  • 0.16 in (12)
  • 0.165 in (19)
  • 0.173 in (12)
  • 0.178 in (13)
  • 0.185 in (1)
  • 0.19 in (21)
  • 0.191 in (21)
  • 0.198 in (12)
  • 0.2 in (69)
  • 0.202 in (13)
  • 0.203 in (32)
  • 0.21 in (10)
  • 0.223 in (1)
  • 0.224 in (12)
  • 0.235 in (12)
  • 0.24 in (1)
  • 0.244 in (6)
  • 0.25 in (13)
  • 0.251 in (12)
  • 0.254 in (20)
  • 0.269 in (13)
  • 0.279 in (2)
  • 0.282 in (12)
  • 0.284 in (12)
  • 0.3 in (12)
  • 0.305 in (2)
  • 0.31 in (1)
  • 0.315 in (16)
  • 0.318 in (20)
  • 0.33 in (12)
  • 0.34 in (30)
  • 0.343 in (7)
  • 0.356 in (12)
  • 0.381 in (1)
  • 0.397 in (66)
  • 0.4 in (84)
  • 0.404 in (12)
  • 0.406 in (12)
  • 0.43 in (12)
  • 0.432 in (4)
  • 0.445 in (19)
  • 0.472 in (6)
  • 0.49 in (12)
  • 0.5 in (3)
  • 0.508 in (12)
  • 0.533 in (2)
  • 0.565 in (4)
  • 0.57 in (6)
  • 0.572 in (19)
  • 0.575 in (13)
  • 0.6 in (4)
  • 0.7 in (5)
  • 0.75 in (2)
  • 0.76 in (1)
  • 0.787 in (14)
  • 0.79 in (1)
  • 0.792 in (32)
  • 0.794 in (68)
  • 0.795 in (1)
  • 0.8 in (99)
  • 0.902 in (19)
  • 0.93 in (1)
  • 0.936 in (5)
  • 1.0 in (15)
  • 1.01 in (1)
  • 1.188 in (22)
  • 1.19 in (14)
  • 1.191 in (75)
  • 1.194 in (14)
  • 1.195 in (6)
  • 1.2 in (96)
  • 1.25 in (14)
  • 1.404 in (1)
  • 1.5 in (14)
  • 1.515 in (1)
  • 1.585 in (12)
  • 1.587 in (14)
  • 1.588 in (75)
  • 1.59 in (4)
  • 1.6 in (76)
  • 1.75 in (14)
  • 1.98 in (6)
  • 1.981 in (12)
  • 2.0 in (19)
  • 2.25 in (19)
  • 2.38 in (13)
  • 2.381 in (8)
  • 2.388 in (19)
  • 2.39 in (3)
  • 2.4 in (29)
  • 2.5 in (7)
  • 3.175 in (7)
  • 3.18 in (4)
  • 3.2 in (21)
  • 4.0 in (8)
  • 5.0 in (7)
  • 6.0 in (7)
  • 7.94 in (2)
  • 8.0 in (2)
  • 10.0 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (9)
  • 0.038 mm (18)
  • 0.051 mm (18)
  • 0.056 mm (5)
  • 0.057 mm (6)
  • 0.066 mm (12)
  • 0.07 mm (10)
  • 0.071 mm (1)
  • 0.076 mm (28)
  • 0.08 mm (20)
  • 0.081 mm (5)
  • 0.082 mm (1)
  • 0.085 mm (1)
  • 0.086 mm (1)
  • 0.089 mm (2)
  • 0.09 mm (2)
  • 0.091 mm (1)
  • 0.094 mm (12)
  • 0.097 mm (11)
  • 0.1 mm (63)
  • 0.102 mm (59)
  • 0.108 mm (5)
  • 0.116 mm (6)
  • 0.117 mm (6)
  • 0.127 mm (12)
  • 0.13 mm (1)
  • 0.131 mm (12)
  • 0.132 mm (12)
  • 0.133 mm (12)
  • 0.135 mm (1)
  • 0.15 mm (12)
  • 0.152 mm (22)
  • 0.157 mm (12)
  • 0.159 mm (1)
  • 0.16 mm (12)
  • 0.165 mm (19)
  • 0.173 mm (12)
  • 0.178 mm (13)
  • 0.185 mm (1)
  • 0.19 mm (21)
  • 0.191 mm (21)
  • 0.198 mm (12)
  • 0.2 mm (69)
  • 0.202 mm (13)
  • 0.203 mm (32)
  • 0.21 mm (10)
  • 0.223 mm (1)
  • 0.224 mm (12)
  • 0.235 mm (12)
  • 0.24 mm (1)
  • 0.244 mm (6)
  • 0.25 mm (13)
  • 0.251 mm (12)
  • 0.254 mm (20)
  • 0.269 mm (13)
  • 0.279 mm (2)
  • 0.282 mm (12)
  • 0.284 mm (12)
  • 0.3 mm (12)
  • 0.305 mm (2)
  • 0.31 mm (1)
  • 0.315 mm (16)
  • 0.318 mm (20)
  • 0.33 mm (12)
  • 0.34 mm (30)
  • 0.343 mm (7)
  • 0.356 mm (12)
  • 0.381 mm (1)
  • 0.397 mm (66)
  • 0.4 mm (84)
  • 0.404 mm (12)
  • 0.406 mm (12)
  • 0.43 mm (12)
  • 0.432 mm (4)
  • 0.445 mm (19)
  • 0.472 mm (6)
  • 0.49 mm (12)
  • 0.5 mm (3)
  • 0.508 mm (12)
  • 0.533 mm (2)
  • 0.565 mm (4)
  • 0.57 mm (6)
  • 0.572 mm (19)
  • 0.575 mm (13)
  • 0.6 mm (4)
  • 0.7 mm (5)
  • 0.75 mm (2)
  • 0.76 mm (1)
  • 0.787 mm (14)
  • 0.79 mm (1)
  • 0.792 mm (32)
  • 0.794 mm (68)
  • 0.795 mm (1)
  • 0.8 mm (99)
  • 0.902 mm (19)
  • 0.93 mm (1)
  • 0.936 mm (5)
  • 1.0 mm (15)
  • 1.01 mm (1)
  • 1.188 mm (22)
  • 1.19 mm (14)
  • 1.191 mm (75)
  • 1.194 mm (14)
  • 1.195 mm (6)
  • 1.2 mm (96)
  • 1.25 mm (14)
  • 1.404 mm (1)
  • 1.5 mm (14)
  • 1.515 mm (1)
  • 1.585 mm (12)
  • 1.587 mm (14)
  • 1.588 mm (75)
  • 1.59 mm (4)
  • 1.6 mm (76)
  • 1.75 mm (14)
  • 1.98 mm (6)
  • 1.981 mm (12)
  • 2.0 mm (19)
  • 2.25 mm (19)
  • 2.38 mm (13)
  • 2.381 mm (8)
  • 2.388 mm (19)
  • 2.39 mm (3)
  • 2.4 mm (29)
  • 2.5 mm (7)
  • 3.175 mm (7)
  • 3.18 mm (4)
  • 3.2 mm (21)
  • 4.0 mm (8)
  • 5.0 mm (7)
  • 6.0 mm (7)
  • 7.94 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (67)
  • 241 (14)
  • AC5 (4)
  • CG4 (2)
  • CL4 (49)
  • CM2 (65)
  • CM3 (53)
  • CM4 (28)
  • CM5 (6)
  • CPX (72)
  • CW2 (32)
  • CW2015 (63)
  • CW5025 (68)
  • GH1 (2)
  • GX (31)
  • HCK10 (6)
  • HCK20 (5)
  • HK1500 (54)
  • HK35 (6)
  • HT2 (51)
  • HTX (31)
  • HWK15 (6)
  • K00326 (3)
  • K00331 (6)
  • K060 (23)
  • K090 (72)
  • K1 (28)
  • K1010P (2)
  • K10M (92)
  • K10P (73)
  • K10U (61)
  • K15 (11)
  • K15U (61)
  • K20K (84)
  • K21 (29)
  • K25M (74)
  • K25P (74)
  • K2885 (14)
  • K313 (125)
  • K35P (52)
  • K420 (80)
  • K45 (26)
  • K4H (13)
  • K6 (1)
  • K68 (124)
  • K8735 (3)
  • KB1340 (17)
  • KB1345 (47)
  • KB1610 (41)
  • KB1625 (37)
  • KB1630 (48)
  • KB5610 (40)
  • KB5625 (49)
  • KB5630 (36)
  • KB9610 (59)
  • KB9640 (21)
  • KBH10 (61)
  • KBH10B (43)
  • KBH20 (71)
  • KBH20B (43)
  • KBK35 (14)
  • KC210 (55)
  • KC250 (67)
  • KC5010 (135)
  • KC5020P (13)
  • KC5025 (141)
  • KC5410 (119)
  • KC5510 (78)
  • KC5525 (46)
  • KC710 (43)
  • KC720 (106)
  • KC722 (41)
  • KC725M (47)
  • KC730 (121)
  • KC7310 (81)
  • KC732 (79)
  • KC735M (7)
  • KC792M (1)
  • KC8050 (106)
  • KC810 (125)
  • KC850 (125)
  • KC9010 (80)
  • KC9025 (101)
  • KC910 (113)
  • KC9105 (90)
  • KC9110 (126)
  • KC9120 (97)
  • KC9125 (105)
  • KC9125RR (1)
  • KC9140 (78)
  • KC9145 (76)
  • KC9210 (18)
  • KC9215 (78)
  • KC9225 (99)
  • KC9240 (100)
  • KC9240NEW (100)
  • KC9245 (78)
  • KC925M (2)
  • KC930M (2)
  • KC9315 (106)
  • KC9320 (119)
  • KC9325 (84)
  • KC935 (120)
  • KC950 (112)
  • KC990 (80)
  • KCD25 (29)
  • KCK05 (98)
  • KCK05B (90)
  • KCK15 (97)
  • KCK15B (103)
  • KCK20 (120)
  • KCK20B (121)
  • KCM15 (95)
  • KCM15B (88)
  • KCM25 (103)
  • KCM25B (97)
  • KCM35 (91)
  • KCM35B (67)
  • KCP05 (83)
  • KCP05B (59)
  • KCP10 (104)
  • KCP10B (126)
  • KCP15 (9)
  • KCP25 (105)
  • KCP25B (126)
  • KCP30 (100)
  • KCP30B (81)
  • KCP40 (73)
  • KCP40B (82)
  • KCPK05 (84)
  • KCPK30 (7)
  • KCS10 (38)
  • KCS10B (103)
  • KCU10 (127)
  • KCU25 (127)
  • KD050 (44)
  • KD081 (50)
  • KD100 (54)
  • KD120 (49)
  • KD1400 (42)
  • KD1405 (34)
  • KD1425 (57)
  • KM1 (25)
  • KMF (14)
  • KS15 (17)
  • KT1120 (17)
  • KT125 (49)
  • KT150 (29)
  • KT175 (76)
  • KT315 (92)
  • KT325 (51)
  • KT5020 (3)
  • KTP10 (21)
  • KU10 (13)
  • KU10T (88)
  • KU25T (27)
  • KU30T (116)
  • KY1310 (41)
  • KY1320 (68)
  • KY1540 (29)
  • KY1615 (69)
  • KY2000 (42)
  • KY2100 (23)
  • KY3000 (91)
  • KY3400 (55)
  • KY3500 (76)
  • KY4000 (31)
  • KY4300 (41)
  • KY4400 (67)
  • KYHK15B (67)
  • KYK10 (27)
  • KYK25 (47)
  • KYK35 (76)
  • KYS25 (29)
  • KYS30 (33)
  • MC2 (4)
  • NL200 (32)
  • NL250 (80)
  • NL300 (67)
  • NL400 (45)
  • NL400S (8)
  • NL920 (67)
  • P25 (26)
  • PB100 (16)
  • PB170 (18)
  • PB250 (20)
  • PB300 (14)
  • PD100 (6)
  • PD50 (6)
  • PN120 (1)
  • PS5 (34)
  • SP0819 (72)
  • SP0A00 (1)
  • SP0PW3 (4)
  • SP3019 (72)
  • SP4019 (50)
  • SP4036 (3)
  • SP4066 (5)
  • SP4093 (3)
  • SP61EJ (1)
  • SPADAP (14)
  • SPN4W2 (8)
  • SPSREJ (1)
  • THM (79)
  • THM-X (17)
  • THMF-X (15)
  • TN10P (103)
  • TN10U (65)
  • TN15M (92)
  • TN15U (61)
  • TN2000 (66)
  • TN20K (93)
  • TN20P (95)
  • TN30M (94)
  • TN30P (73)
  • TN4000 (60)
  • TN5015 (84)
  • TN5020 (84)
  • TN5105 (53)
  • TN5120 (94)
  • TN6010 (70)
  • TN6025 (76)
  • TN7005 (57)
  • TN7010 (93)
  • TN7015 (93)
  • TN7025 (93)
  • TN7035 (83)
  • TN7105 (56)
  • TN7110 (107)
  • TN7115 (94)
  • TN7125 (87)
  • TN7135 (85)
  • TN8025 (80)
  • TTI15 (47)
  • TTM09 (12)
  • TTR (22)
  • TTR-X (8)
  • TTS (48)
  • TTX (43)
  • W00342 (14)
  • WBH10C (59)
  • WBH10P (36)
  • WBH10U (41)
  • WBH20P (54)
  • WBH25P (37)
  • WBH25U (55)
  • WBH30P (36)
  • WBK40U (17)
  • WBK45U (46)
  • WDN00U (22)
  • WDN25U (42)
  • WK05CT (84)
  • WK15CT (53)
  • WK20CT (98)
  • WM15CT (95)
  • WM25CT (95)
  • WM35CT (78)
  • WP05CT (18)
  • WP15CT (100)
  • WP20TT (4)
  • WP25CT (100)
  • WP35CM (2)
  • WP35CT (98)
  • WS10PT (83)
  • WS25PT (80)
  • WU05PT (6)
  • WU10HT (93)
  • WU10PT (63)
  • WU20PM (7)
  • WU25PT (63)
  • X00511 (14)
Hand Of Tool
Hand Of Tool
  • L (41)
  • N (8)
  • R (45)
Wiper Insert
Wiper Insert
  • N (143)
  • Y (59)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (2)
  • 32.0 mm (7)
  • 34.0 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (13)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 48.0 mm (3)
  • 48.5 mm (2)
  • 50.0 mm (16)
  • 53.0 mm (1)
  • 57.2 mm (2)
  • 63.0 mm (5)
  • 81.0 mm (3)
  • 88.9 mm (2)
  • 90.0 mm (7)
  • 110.0 mm (31)
  • 125.0 mm (14)
  • 139.7 mm (2)
  • 174.6 mm (2)
  • 209.6 mm (2)
  • 215.0 mm (2)
  • 222.3 mm (2)
  • 510.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 0.946 in (1)
  • 0.965 in (1)
  • 0.984 in (2)
  • 1.26 in (7)
  • 1.339 in (2)
  • 1.516 in (2)
  • 1.575 in (13)
  • 1.891 in (3)
  • 1.909 in (2)
  • 1.969 in (16)
  • 2.087 in (1)
  • 2.48 in (5)
  • 3.189 in (3)
  • 3.543 in (7)
  • 4.331 in (31)
  • 4.921 in (14)
  • 8.465 in (2)
  • 20.079 in (2)
  • 41.3 in (2)
  • 47.6 in (2)
  • 57.2 in (2)
  • 88.9 in (2)
  • 139.7 in (2)
  • 174.6 in (2)
  • 209.6 in (2)
  • 222.3 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 in (21)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (21)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (17)
  • E (32)
  • P (1)
  • S (44)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (45)
  • NEGATIVE-ZERO (14)
  • NEUTRAL (ZERO) (22)
Maximum Bore Depth
Maximum Bore Depth
  • 1.655 in (2)
  • 1.891 in (2)
  • 2.047 in (2)
  • 2.126 in (1)
  • 2.205 in (1)
  • 2.441 in (2)
  • 2.512 in (2)
  • 2.52 in (2)
  • 2.525 in (1)
  • 2.559 in (48)
  • 2.835 in (2)
  • 2.914 in (3)
  • 3.15 in (5)
  • 3.281 in (2)
  • 3.307 in (4)
  • 3.701 in (2)
  • 3.91 in (2)
  • 4.157 in (2)
  • 4.339 in (1)
  • 4.37 in (1)
  • 4.371 in (1)
  • 4.449 in (1)
  • 4.488 in (4)
  • 4.493 in (2)
  • 4.529 in (4)
  • 4.531 in (2)
  • 4.724 in (1)
  • 5.984 in (5)
Maximum Bore Depth Min