Beyond Evolution

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (942)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (942)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (942)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (942)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (942)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (942)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (942)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (942)
  • M Stainless Steel (781)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (781)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (781)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (781)
  • K Cast Iron (942)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (942)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (942)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (942)
  • N Non-Ferrous Materials (810)
    • N1
      Wrought Aluminum (810)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (781)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (810)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (781)
    • N6
      Carbon, Graphite Composites, CFRP (781)
  • S High-Temp Alloys (810)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (810)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (810)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (810)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (810)
  • H Hardened Materials (674)
    • H1
      Hardened Materials 44-48 HRC (674)
    • H2
      Hardened Materials 48-55 HRC (674)
第1選択を選択
  • BR (6)
  • CN (71)
  • DE (69)
  • GB (42)
  • IN (20)
  • SG (47)
  • US (71)
Applications
Applications
  • Back Boring Back Boring (508)
  • Boring Boring (508)
  • Cut-Off Cut-Off (680)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (938)
  • Facing Facing (508)
  • Grooving Grooving (925)
  • ID Facing ID Facing (516)
  • ID Grooving ID Grooving (508)
  • Multiple Direction Cutting Multiple Direction Cutting (96)
  • Plunge Turning Plunge Turning (403)
  • Profiling Profiling (463)
  • Turning Turning (508)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min to Cutting Length Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (638)
  • Lightly Interrupted Cut (840)
  • Smooth Cut (971)
  • Varying Depth of Cut (840)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (462)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (16)
  • Toolholder (253)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (1)
  • 1.0 (777)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.881 in (36)
  • 2.037 in (32)
  • 2.111 in (32)
  • 2.195 in (50)
  • 2.431 in (24)
  • 2.584 in (1)
  • 2.668 in (18)
  • 4.5 in (20)
  • 4.921 in (20)
  • 5.463 in (2)
  • 5.508 in (6)
  • 5.906 in (93)
  • 5.915 in (2)
  • 5.961 in (6)
  • 6.0 in (116)
  • 6.25 in (2)
  • 6.694 in (20)
  • 6.703 in (2)
  • 7.0 in (4)
  • 7.875 in (8)
  • 9.843 in (4)
  • 11.811 in (4)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 47.75 mm (36)
  • 51.75 mm (32)
  • 53.625 mm (32)
  • 55.75 mm (50)
  • 61.75 mm (24)
  • 65.625 mm (1)
  • 67.75 mm (18)
  • 114.301 mm (20)
  • 125.0 mm (20)
  • 138.75 mm (2)
  • 139.9 mm (6)
  • 150.0 mm (93)
  • 150.25 mm (2)
  • 151.4 mm (6)
  • 152.4 mm (116)
  • 158.75 mm (2)
  • 170.0 mm (20)
  • 170.25 mm (2)
  • 177.8 mm (4)
  • 200.0 mm (8)
  • 250.0 mm (4)
  • 300.0 mm (4)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (323)
  • 0.012 in (211)
  • 0.016 in (573)
  • 0.031 in (430)
  • 0.039 in (7)
  • 0.041 in (13)
  • 0.046 in (11)
  • 0.047 in (64)
  • 0.06 in (136)
  • 0.061 in (143)
  • 0.063 in (140)
  • 0.065 in (141)
  • 0.079 in (111)
  • 0.081 in (118)
  • 0.094 in (115)
  • 0.096 in (117)
  • 0.098 in (126)
  • 0.1 in (133)
  • 0.119 in (93)
  • 0.12 in (100)
  • 0.125 in (99)
  • 0.128 in (95)
  • 0.156 in (17)
  • 0.157 in (12)
  • 0.158 in (15)
  • 0.159 in (19)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (323)
  • 0.301 mm (211)
  • 0.4 mm (573)
  • 0.8 mm (430)
  • 1.0 mm (7)
  • 1.05 mm (13)
  • 1.175 mm (11)
  • 1.201 mm (64)
  • 1.5 mm (136)
  • 1.55 mm (143)
  • 1.6 mm (140)
  • 1.651 mm (141)
  • 2.0 mm (111)
  • 2.051 mm (118)
  • 2.375 mm (115)
  • 2.45 mm (117)
  • 2.5 mm (126)
  • 2.551 mm (133)
  • 3.0 mm (93)
  • 3.051 mm (100)
  • 3.176 mm (99)
  • 3.25 mm (95)
  • 3.95 mm (17)
  • 4.0 mm (12)
  • 4.025 mm (15)
  • 4.05 mm (19)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (702)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (702)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (491)
  • KCK20B (497)
  • KCM35B (365)
  • KCP10B (520)
  • KCP25B (530)
  • KCU10 (568)
  • KCU10B (568)
  • KCU25 (569)
  • KCU25B (462)
Hand Of Tool
Hand Of Tool
  • L (135)
  • R (134)
Wiper Insert
Wiper Insert
  • N (777)
F Dimension
F Dimension
  • 12.75 mm (4)
  • 12.951 mm (4)
  • 16.125 mm (2)
  • 16.25 mm (2)
  • 19.201 mm (20)
  • 19.3 mm (2)
  • 20.175 mm (20)
  • 20.25 mm (2)
  • 25.175 mm (48)
  • 25.201 mm (41)
  • 25.55 mm (69)
  • 25.576 mm (23)
  • 31.901 mm (8)
  • 31.925 mm (8)
  • 32.15 mm (8)
  • 32.176 mm (8)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.502 in (4)
  • 0.51 in (4)
  • 0.635 in (2)
  • 0.64 in (2)
  • 0.756 in (20)
  • 0.76 in (2)
  • 0.794 in (20)
  • 0.797 in (2)
  • 0.991 in (48)
  • 0.992 in (41)
  • 1.006 in (69)
  • 1.008 in (23)
  • 1.256 in (8)
  • 1.258 in (8)
  • 1.266 in (8)
  • 1.268 in (8)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 26.0 mm (4)
  • 30.0 mm (8)
  • 33.0 mm (4)
  • 35.0 mm (8)
  • 40.0 mm (17)
  • 41.0 mm (4)
  • 50.0 mm (29)
  • 60.0 mm (52)
  • 75.0 mm (59)
  • 80.0 mm (4)
  • 100.0 mm (69)
  • 180.0 mm (72)
  • 250.0 mm (66)
  • 350.0 mm (66)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.024 in (4)
  • 1.181 in (8)
  • 1.299 in (4)
  • 1.379 in (8)
  • 1.575 in (17)
  • 1.614 in (4)
  • 1.969 in (29)
  • 2.362 in (52)
  • 2.953 in (59)
  • 3.15 in (4)
  • 3.938 in (69)
  • 7.087 in (72)
  • 9.843 in (66)
  • 13.781 in (66)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.181 in (4)
  • 1.379 in (8)
  • 1.575 in (8)
  • 1.655 in (4)
  • 1.969 in (21)
  • 2.362 in (31)
  • 2.953 in (50)
  • 3.938 in (59)
  • 7.087 in (73)
  • 9.843 in (68)
  • 13.781 in (66)
  • 39.331 in (70)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 30.0 mm (4)
  • 35.0 mm (8)
  • 40.0 mm (8)
  • 42.0 mm (4)
  • 50.0 mm (21)
  • 60.0 mm (31)
  • 75.0 mm (50)
  • 100.0 mm (59)
  • 180.0 mm (73)
  • 250.0 mm (68)
  • 350.0 mm (66)
  • 999.0 mm (70)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (269)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (236)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (4)
  • 4.0 in (4)
  • 5.0 in (2)
  • 5.039 in (2)
  • 6.0 in (2)
  • 6.299 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (4)
  • 101.601 mm (4)
  • 127.0 mm (2)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (16)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (76)
  • SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
  • Y (298)
Cutting Width
Cutting Width
  • 0.063 in (10)
  • 0.079 in (11)
  • 0.084 in (24)
  • 0.094 in (10)
  • 0.095 in (14)
  • 0.098 in (14)
  • 0.119 in (144)
  • 0.123 in (163)
  • 0.125 in (160)
  • 0.13 in (163)
  • 0.157 in (119)
  • 0.161 in (132)
  • 0.162 in (140)
  • 0.187 in (133)
  • 0.188 in (107)
  • 0.192 in (138)
  • 0.197 in (133)
  • 0.202 in (155)
  • 0.237 in (101)
  • 0.241 in (120)
  • 0.25 in (118)
  • 0.255 in (110)
  • 0.276 in (93)
  • 0.281 in (94)
  • 0.289 in (89)
  • 0.312 in (24)
  • 0.315 in (20)
  • 0.317 in (24)
  • 0.32 in (39)
  • 0.375 in (6)
  • 0.394 in (4)
  • 0.399 in (10)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.6 mm (10)
  • 2.0 mm (11)
  • 2.125 mm (24)
  • 2.375 mm (10)
  • 2.401 mm (14)
  • 2.5 mm (14)
  • 3.0 mm (144)
  • 3.125 mm (163)
  • 3.176 mm (160)
  • 3.301 mm (163)
  • 4.0 mm (119)
  • 4.101 mm (132)
  • 4.125 mm (140)
  • 4.75 mm (133)
  • 4.775 mm (107)
  • 4.875 mm (138)
  • 5.0 mm (133)
  • 5.125 mm (155)
  • 6.0 mm (101)
  • 6.125 mm (120)
  • 6.351 mm (118)
  • 6.476 mm (110)
  • 7.0 mm (93)
  • 7.125 mm (94)
  • 7.325 mm (89)
  • 7.926 mm (24)
  • 8.0 mm (20)
  • 8.05 mm (24)
  • 8.125 mm (39)
  • 9.525 mm (6)
  • 10.0 mm (4)
  • 10.125 mm (10)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (76)
  • VKT - Square Shank (20)
Insert Shape
Insert Shape
  • PRISMATIC (971)
Cartridge Size
Cartridge Size
  • 50 (160)
  • 65 (33)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (76)
  • VKT01 Std Design (20)
Insert Size
Insert Size
  • 2 (4)
  • 3 (76)
  • 4 (53)
  • 5 (72)
  • 6 (64)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.473 in (92)
  • 0.63 in (113)
  • 0.787 in (106)
  • 1.024 in (100)
  • 1.26 in (51)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 12.0 mm (92)
  • 16.0 mm (113)
  • 20.0 mm (106)
  • 26.0 mm (100)
  • 32.0 mm (51)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 0.866 in (12)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.303 in (6)
  • 2.382 in (2)
  • 2.5 in (12)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (6)
  • 5.533 in (4)
  • 5.906 in (2)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.534 in (2)
  • 6.694 in (2)
Gage Length
Gage Length
  • 22 mm (12)
  • 47 mm (6)
  • 48 mm (6)
  • 57 mm (6)