Beyond Evolution

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1051)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1051)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1051)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1051)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1051)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1051)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1051)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1051)
    • M Stainless Steel (890)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(890)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(890)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(890)
    • K Cast Iron (1051)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1051)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1051)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1051)
    • N Non-Ferrous Materials (919)
      • N1
        Wrought Aluminum (919)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(890)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (919)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (890)
      • N6
        Carbon, Graphite Composites, CFRP (890)
    • S High-Temp Alloys (919)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(919)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(919)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(919)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(919)
    • H Hardened Materials (648)
      • H1
        Hardened Materials 44-48 HRC(648)
      • H2
        Hardened Materials 48-55 HRC(648)
    第1選択を選択
    • BR (16)
    • CN (187)
    • DE (197)
    • GB (106)
    • IN (21)
    • SG (78)
    • US (257)
    Applications
    Applications
    • Back BoringBack Boring (509)
    • BoringBoring (509)
    • CRT ProfilingCRT Profiling (2)
    • Cut-OffCut-Off (667)
    • Deep GroovingDeep Grooving (38)
    • Face GroovingFace Grooving (512)
    • FacingFacing (517)
    • GroovingGrooving (846)
    • ID FacingID Facing (509)
    • ID GroovingID Grooving (580)
    • Multiple Direction CuttingMultiple Direction Cutting (95)
    • Plunge TurningPlunge Turning (520)
    • ProfilingProfiling (492)
    • TurningTurning (557)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (738)
    • Lightly Interrupted Cut (939)
    • Smooth Cut (1070)
    • Varying Depth of Cut (939)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (8)
    • 90.0 (455)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (52)
    • Cutoff Support Blade A1-A3 (49)
    • Toolholder (320)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (1038)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.795 in(1)
    • 0.992 in(2)
    • 1.881 in(10)
    • 1.954 in(4)
    • 2.037 in(8)
    • 2.274 in(4)
    • 2.347 in(4)
    • 2.431 in(6)
    • 2.584 in(2)
    • 2.668 in(4)
    • 3.553 in(3)
    • 4.341 in(21)
    • 4.5 in(86)
    • 4.921 in(96)
    • 4.931 in(4)
    • 5.327 in(2)
    • 5.348 in(2)
    • 5.372 in(4)
    • 5.394 in(4)
    • 5.463 in(2)
    • 5.508 in(6)
    • 5.906 in(60)
    • 5.912 in(1)
    • 5.915 in(17)
    • 5.961 in(6)
    • 6.0 in(76)
    • 6.114 in(2)
    • 6.136 in(2)
    • 6.25 in(2)
    • 6.372 in(2)
    • 6.394 in(2)
    • 6.694 in(26)
    • 6.703 in(2)
    • 7.0 in(10)
    • 7.087 in(12)
    • 7.875 in(18)
    • 9.843 in(8)
    • 10.236 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 20.201 mm(1)
    • 25.201 mm(2)
    • 47.75 mm(10)
    • 49.625 mm(4)
    • 51.75 mm(8)
    • 57.75 mm(4)
    • 59.625 mm(4)
    • 61.75 mm(6)
    • 65.625 mm(2)
    • 67.75 mm(4)
    • 90.25 mm(3)
    • 110.25 mm(21)
    • 114.301 mm(86)
    • 125.0 mm(96)
    • 125.25 mm(4)
    • 135.3 mm(2)
    • 135.85 mm(2)
    • 136.451 mm(4)
    • 137.0 mm(4)
    • 138.75 mm(2)
    • 139.9 mm(6)
    • 150.0 mm(60)
    • 150.15 mm(1)
    • 150.25 mm(17)
    • 151.4 mm(6)
    • 152.4 mm(76)
    • 155.3 mm(2)
    • 155.851 mm(2)
    • 158.75 mm(2)
    • 161.851 mm(2)
    • 162.4 mm(2)
    • 170.0 mm(26)
    • 170.25 mm(2)
    • 177.8 mm(10)
    • 180.0 mm(12)
    • 200.0 mm(18)
    • 250.0 mm(8)
    • 260.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(26)
    • 0.006 in(26)
    • 0.008 in(440)
    • 0.012 in(89)
    • 0.016 in(423)
    • 0.031 in(314)
    • 0.039 in(108)
    • 0.041 in(115)
    • 0.046 in(26)
    • 0.047 in(198)
    • 0.06 in(101)
    • 0.061 in(109)
    • 0.063 in(106)
    • 0.065 in(107)
    • 0.079 in(82)
    • 0.081 in(90)
    • 0.094 in(87)
    • 0.096 in(89)
    • 0.098 in(52)
    • 0.1 in(60)
    • 0.119 in(47)
    • 0.12 in(55)
    • 0.125 in(54)
    • 0.128 in(50)
    • 0.156 in(33)
    • 0.157 in(27)
    • 0.158 in(31)
    • 0.159 in(35)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(26)
    • 0.151 mm(26)
    • 0.2 mm(440)
    • 0.301 mm(89)
    • 0.4 mm(423)
    • 0.8 mm(314)
    • 1.0 mm(108)
    • 1.05 mm(115)
    • 1.175 mm(26)
    • 1.201 mm(198)
    • 1.5 mm(101)
    • 1.55 mm(109)
    • 1.6 mm(106)
    • 1.651 mm(107)
    • 2.0 mm(82)
    • 2.051 mm(90)
    • 2.375 mm(87)
    • 2.45 mm(89)
    • 2.5 mm(52)
    • 2.551 mm(60)
    • 3.0 mm(47)
    • 3.051 mm(55)
    • 3.176 mm(54)
    • 3.25 mm(50)
    • 3.95 mm(33)
    • 4.0 mm(27)
    • 4.025 mm(31)
    • 4.05 mm(35)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(659)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(659)
    Corner Chamfer MintoCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (466)
    • KCK20B (472)
    • KCM35B (350)
    • KCP10B (495)
    • KCP25B (505)
    • KCP25C (437)
    • KCS10B (324)
    • KCU10 (543)
    • KCU10B (542)
    • KCU25 (571)
    • KCU25B (571)
    Hand Of Tool
    Hand Of Tool
    • L (194)
    • N (30)
    • N - Neutral (3)
    • R (194)
    Wiper Insert
    Wiper Insert
    • N (1038)
    F Dimension
    F Dimension
    • 1.276 mm(3)
    • 1.451 mm(2)
    • 1.826 mm(10)
    • 2.7 mm(3)
    • 3.7 mm(2)
    • 5.476 mm(6)
    • 5.976 mm(6)
    • 8.525 mm(4)
    • 9.0 mm(4)
    • 9.525 mm(6)
    • 10.0 mm(6)
    • 11.0 mm(5)
    • 11.05 mm(7)
    • 12.0 mm(18)
    • 12.025 mm(2)
    • 12.101 mm(2)
    • 12.15 mm(2)
    • 12.701 mm(18)
    • 12.726 mm(2)
    • 12.8 mm(2)
    • 12.851 mm(2)
    • 13.0 mm(6)
    • 13.951 mm(2)
    • 13.976 mm(4)
    • 15.875 mm(8)
    • 15.976 mm(2)
    • 16.0 mm(8)
    • 16.026 mm(4)
    • 16.1 mm(2)
    • 16.151 mm(4)
    • 17.0 mm(4)
    • 17.3 mm(6)
    • 17.5 mm(2)
    • 19.05 mm(8)
    • 19.075 mm(10)
    • 19.125 mm(20)
    • 19.225 mm(4)
    • 20.0 mm(8)
    • 20.05 mm(10)
    • 20.1 mm(20)
    • 20.201 mm(4)
    • 21.125 mm(4)
    • 22.0 mm(4)
    • 25.05 mm(12)
    • 25.1 mm(24)
    • 25.201 mm(4)
    • 25.35 mm(2)
    • 25.425 mm(12)
    • 25.475 mm(24)
    • 25.576 mm(4)
    • 25.701 mm(2)
    • 26.0 mm(2)
    • 31.0 mm(2)
    • 31.5 mm(3)
    • 31.75 mm(1)
    • 31.826 mm(12)
    • 31.925 mm(4)
    • 32.051 mm(4)
    • 32.075 mm(12)
    • 32.176 mm(4)
    • 32.301 mm(4)
    • 32.4 mm(2)
    • 32.65 mm(2)
    • 38.275 mm(2)
    • 38.401 mm(2)
    • 38.75 mm(2)
    • 40.176 mm(2)
    • 40.301 mm(2)
    • 40.651 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.05 in(3)
    • 0.057 in(2)
    • 0.073 in(10)
    • 0.106 in(3)
    • 0.146 in(2)
    • 0.216 in(6)
    • 0.236 in(6)
    • 0.336 in(4)
    • 0.354 in(4)
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.433 in(5)
    • 0.435 in(7)
    • 0.473 in(18)
    • 0.474 in(2)
    • 0.477 in(2)
    • 0.479 in(2)
    • 0.5 in(18)
    • 0.501 in(2)
    • 0.504 in(2)
    • 0.506 in(2)
    • 0.512 in(6)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.625 in(8)
    • 0.629 in(2)
    • 0.63 in(8)
    • 0.631 in(4)
    • 0.634 in(2)
    • 0.636 in(4)
    • 0.669 in(4)
    • 0.681 in(6)
    • 0.69 in(2)
    • 0.75 in(8)
    • 0.751 in(10)
    • 0.753 in(20)
    • 0.757 in(4)
    • 0.787 in(8)
    • 0.789 in(10)
    • 0.791 in(20)
    • 0.795 in(4)
    • 0.833 in(4)
    • 0.866 in(4)
    • 0.986 in(12)
    • 0.988 in(24)
    • 0.992 in(4)
    • 0.998 in(2)
    • 1.002 in(12)
    • 1.004 in(24)
    • 1.008 in(4)
    • 1.012 in(2)
    • 1.024 in(2)
    • 1.22 in(2)
    • 1.24 in(3)
    • 1.25 in(1)
    • 1.254 in(12)
    • 1.258 in(4)
    • 1.262 in(4)
    • 1.264 in(12)
    • 1.268 in(4)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.285 in(2)
    • 1.508 in(2)
    • 1.512 in(2)
    • 1.526 in(2)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.6 in(2)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 20.0 mm(12)
    • 25.0 mm(10)
    • 25.401 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(4)
    • 40.0 mm(4)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.787 in(12)
    • 0.984 in(10)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(6)
    • 1.5 in(4)
    • 1.575 in(4)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(28)
    • 1.024 in(8)
    • 1.26 in(40)
    • 1.655 in(24)
    • 2.047 in(24)
    • 2.441 in(29)
    • 2.52 in(11)
    • 2.598 in(8)
    • 3.15 in(4)
    • 3.228 in(4)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(28)
    • 26.0 mm(8)
    • 32.0 mm(40)
    • 42.0 mm(24)
    • 52.0 mm(24)
    • 62.0 mm(29)
    • 64.0 mm(11)
    • 66.0 mm(8)
    • 80.0 mm(4)
    • 82.0 mm(4)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (8)
    • E (382)
    • S (31)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (34)
    • NEUTRAL (ZERO) (18)
    • POSITIVE-ZERO (40)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.946 in(4)
    • 1.0 in(4)
    • 1.25 in(6)
    • 1.26 in(4)
    • 1.5 in(6)
    • 1.575 in(4)
    • 1.586 in(2)
    • 1.587 in(2)
    • 1.969 in(2)
    • 1.98 in(4)
    • 2.0 in(7)
    • 2.496 in(2)
    • 2.5 in(1)
    • 2.52 in(4)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.401 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 38.1 mm(6)
    • 40.0 mm(4)
    • 40.276 mm(2)
    • 40.301 mm(2)
    • 50.0 mm(2)
    • 50.301 mm(4)
    • 50.801 mm(7)
    • 63.401 mm(2)
    • 63.5 mm(1)
    • 64.0 mm(4)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (52)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (76)
    • SQUARE SHANK ADAPTER (20)
    Clamp Style
    Clamp Style
    • C (54)
    • S (38)
    • Y (347)
    Cutting Width
    Cutting Width
    • 0.055 in(26)
    • 0.063 in(53)
    • 0.079 in(113)
    • 0.084 in(128)
    • 0.094 in(111)
    • 0.095 in(116)
    • 0.098 in(116)
    • 0.119 in(111)
    • 0.123 in(134)
    • 0.125 in(130)
    • 0.13 in(133)
    • 0.157 in(92)
    • 0.161 in(96)
    • 0.162 in(116)
    • 0.187 in(109)
    • 0.188 in(77)
    • 0.192 in(114)
    • 0.197 in(61)
    • 0.202 in(86)
    • 0.237 in(57)
    • 0.241 in(79)
    • 0.25 in(77)
    • 0.255 in(68)
    • 0.276 in(47)
    • 0.281 in(48)
    • 0.289 in(42)
    • 0.312 in(42)
    • 0.315 in(37)
    • 0.317 in(42)
    • 0.32 in(59)
    • 0.375 in(16)
    • 0.38 in(8)
    • 0.394 in(13)
    • 0.399 in(20)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 1.401 mm(26)
    • 1.6 mm(53)
    • 2.0 mm(113)
    • 2.125 mm(128)
    • 2.375 mm(111)
    • 2.401 mm(116)
    • 2.5 mm(116)
    • 3.0 mm(111)
    • 3.125 mm(134)
    • 3.176 mm(130)
    • 3.301 mm(133)
    • 4.0 mm(92)
    • 4.101 mm(96)
    • 4.125 mm(116)
    • 4.75 mm(109)
    • 4.775 mm(77)
    • 4.875 mm(114)
    • 5.0 mm(61)
    • 5.125 mm(86)
    • 6.0 mm(57)
    • 6.125 mm(79)
    • 6.351 mm(77)
    • 6.476 mm(68)
    • 7.0 mm(47)
    • 7.125 mm(48)
    • 7.325 mm(42)
    • 7.926 mm(42)
    • 8.0 mm(37)
    • 8.05 mm(42)
    • 8.125 mm(59)
    • 9.525 mm(16)
    • 9.65 mm(8)
    • 10.0 mm(13)
    • 10.125 mm(20)
    Cutting Width MintoCutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (76)
    • VKT - Square Shank (20)
    Insert Shape
    Insert Shape
    • PRISMATIC (1080)
    Cartridge Size
    Cartridge Size
    • 50 (32)
    • 65 (10)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (76)
    • VKT01 Std Design (20)
    Insert Size
    Insert Size
    • 10 (8)
    • 1F (12)
    • 2 (64)
    • 3 (56)
    • 4 (56)
    • 5 (36)
    • 6 (32)
    • 8 (16)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.197 in(8)
    • 0.276 in(24)
    • 0.394 in(40)
    • 0.433 in(1)
    • 0.473 in(18)
    • 0.512 in(8)
    • 0.551 in(2)
    • 0.591 in(1)
    • 0.63 in(150)
    • 0.669 in(1)
    • 0.787 in(1)
    • 0.866 in(28)
    • 1.024 in(82)
    • 1.181 in(1)
    • 1.26 in(38)
    • 1.299 in(10)
    • 1.575 in(26)
    • 1.969 in(5)
    • 2.362 in(5)
    • 4.724 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(8)
    • 7.0 mm(24)
    • 10.0 mm(40)
    • 11.0 mm(1)
    • 12.0 mm(18)
    • 13.0 mm(8)
    • 14.0 mm(2)
    • 15.0 mm(1)
    • 16.0 mm(150)
    • 17.0 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(28)
    • 26.0 mm(82)
    • 30.0 mm(1)
    • 32.0 mm(38)
    • 33.0 mm(10)
    • 40.0 mm(26)
    • 50.0 mm(5)
    • 60.0 mm(5)
    • 120.0 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 6 in(4)
    • 7 in(2)
    • 0.866 in(12)
    • 1.102 in(2)
    • 1.299 in(2)
    • 1.496 in(2)
    • 1.693 in(2)
    • 1.85 in(6)
    • 1.891 in(6)
    • 1.929 in(4)
    • 2.106 in(4)
    • 2.185 in(2)
    • 2.244 in(6)
    • 2.283 in(6)
    • 2.303 in(6)
    • 2.382 in(2)
    • 2.5 in(12)
    • 2.579 in(2)
    • 2.618 in(4)
    • 2.697 in(4)
    • 2.894 in(4)
    • 5.439 in(2)
    • 5.463 in(2)
    • 5.482 in(2)
    • 5.508 in(6)
    • 5.529 in(6)
    • 5.533 in(4)
    • 5.906 in(2)
    • 6.226 in(2)
    • 6.25 in(2)
    • 6.271 in(2)
    • 6.534 in(2)
    • 6.694 in(2)
    Gage Length
    Gage Length
    • 22 mm(12)
    • 47 mm(6)
    • 48 mm(6)
    • 57 mm(6)
    • 58 mm(6)
    • 49 mm(4)
    • 150 mm(2)
    • 170 mm(2)
    • 28 mm(2)
    • 33 mm(2)
    • 38 mm(2)
    • 43 mm(2)
    • 53.5 mm(4)
    • 55.5 mm(2)
    • 58.5 mm(6)
    • 60.5 mm(2)
    • 63.5 mm(12)
    • 65.5 mm(2)
    • 66.5 mm(4)
    • 68.5 mm(4)
    • 73.5 mm(4)
    • 138.15 mm(2)
    • 138.75 mm(2)
    • 139.25 mm(2)
    • 139.9 mm(6)
    • 140.4 mm(6)
    • 140.55 mm(4)
    • 152.4 mm(4)
    • 158.15 mm(2)
    • 158.75 mm(2)
    • 159.25 mm(2)
    • 165.951 mm(2)
    • 177.8 mm(2)
    insertGeometry
    Shape
    Shape
    • PRISMATIC (617)
    Insert Seat Size
    Insert Seat Size
    • 10 (25)
    • 1F (12)
    • 2 (64)
    • 3 (124)
    • 4 (123)
    • 5 (53)
    • 6 (124)
    • 8 (92)
    Cutting Tool Material
    Cutting Tool Material
    • B L (414)
    • H W (1080)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (52)
    • CUTOFF BLADE (46)
    • Cutoff Blade (3)
    • SQUARE SHANK (320)
    System Size
    System Size
    • KM40TS (4)
    • KM4X63 (4)
    • KM50TS (8)
    • KM63TS (8)
    • KM63XMZ (8)
    • KM80ATC (8)
    • KM80TS (8)
    • PSC40 (4)
    • PSC50 (8)
    • PSC63 (8)
    • PSC80 (8)
    • VDI30 (10)
    • VDI40 (10)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(4)
    • 12.701 mm(4)
    • 15.875 mm(6)
    • 16.0 mm(6)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 25.0 mm(6)
    • 25.401 mm(6)
    • 30.0 mm(10)
    • 31.701 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(4)
    • 40.0 mm(18)
    • 50.0 mm(16)
    • 63.0 mm(28)
    • 80.0 mm(24)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(4)
    • 0.5 in(4)
    • 0.625 in(6)
    • 0.63 in(6)
    • 0.75 in(6)
    • 0.787 in(6)
    • 0.984 in(6)
    • 1.0 in(6)