Country

言語

測定の単位

定価:

割引: %

定価:

$309.76 /各

価格::

価格::

数量

HARVI II • UCDV • Unequal Flute Spacing

HARVI II • UCDV • Unequal Flute Spacing

HARVI II • UCDV • Unequal Flute Spacing

HARVI II • UCDV • Unequal Flute Spacing

DUO-LOCK™ • HARVI™ II • Chamfered • 5 Flutes • Inch

HARVI II • UCDV • Unequal Flute Spacing

メートル

インチ

SAP Material Number	6072207
ISO Catalog Number	UCDV0625Y5CV
ANSI Catalog Number	UCDV0625Y5CV
Grade	KCPM15
Adapter Style Machine Side	DUO-LOCK
[D] Adapter / Shank / Bore Diameter	15.875 mm
[D] Adapter / Shank / Bore Diameter	.625 in
[AP1MAX] 1st Maximum Cutting Depth	23.813 mm
[AP1MAX] 1st Maximum Cutting Depth	.9375 in
[L1] Gage Length	35.7 mm
[L1] Gage Length	1.405 in
[CSMS] System Size Machine Side	DL16
[WF] Width of Flat	13 mm
[WF] Width of Flat	.5118 in
[BCH] Corner Chamfer Width	0.508 mm
[BCH] Corner Chamfer Width	.02 in
[Z] Number of Flutes	5
[D1] Effective Cutting Diameter	15.875 mm
[D1] Effective Cutting Diameter	.625 in

すべての改良品を表示

使用法と用途

Corner Style: Corner Chamfer
Helix Angle: 37°/39°
プランジミーリング
ランピング加工：ブランク
溝加工：スクエアエンド
側面加工／ショルダー加工：スクエアエンド
工具寸法：フルートの構造： 5

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

H Hardened Materials

特徴と利点

Unequal flute spacing and variable helix configuration minimize chatter and harmonics for smoother machining.

Non-center cutting.

Ramping up to 3°.

Five-flute geometry able to slot up to 1 x D.

Single tool for both roughing and finishing, reducing setups.

Standard items listed. Additional styles and coatings made-to-order.

機械側

荷重...

ワーク側

荷重...

End Mill Tolerances
D1	tolerance e8
13/32 23/32"	-0,00126"/-0,00232"
23/32 1-3/16"	-0,00157"/-0,00287"
1-3/16"	-0,00197''/-0,00350''

HARVI II • UCDV • Unequal Flute Spacing

		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			short			medium			long			Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
		A		B	adapter reach									D1 Diameter
					KCPM15			KCPM15			KCPM15
					Cutting Speed vc SFM			Cutting Speed vc SFM			Cutting Speed vc SFM			frac.	3/8	1/2	5/8	3/4	1	1 1/4
Material Group		ap	ae	ap	Min		Max	Min		Max	Min		Max	dec.	.3750	.5000	.6250	.7500	1.2500	1.2500
P	0	1.5 x D	0.5 x D	1 x D	490	–	660	441	–	594	441	–	594	IPT	.0023	.0029	.0034	.0037	.0042	.0042
	1	1.5 x D	0.5 x D	1 x D	490	–	660	441	–	594	441	–	594	IPT	.0023	.0029	.0034	.0037	.0042	.0042
	2	1.5 x D	0.5 x D	1 x D	460	–	620	414	–	558	414	–	558	IPT	.0023	.0029	.0034	.0037	.0042	.0042
	3	1.5 x D	0.5 x D	1 x D	390	–	520	351	–	468	351	–	468	IPT	.0019	.0025	.0029	.0033	.0041	.0041
	4	1.5 x D	0.4 x D	0.75 x D	300	–	490	270	–	441	270	–	441	IPT	.0017	.0022	.0026	.0029	.0034	.0034
	5	1.5 x D	0.4 x D	1 x D	200	–	330	170	–	280.5	160	–	264	IPT	.0016	.0020	.0023	.0026	.0033	.0033
	6	1.5 x D	0.4 x D	0.75 x D	160	–	250	136	–	212.5	128	–	200	IPT	.0013	.0016	.0019	.0021	.0024	.0024
M	1	1.5 x D	0.4 x D	1 x D	300	–	380	240	–	304	210	–	266	IPT	.0019	.0025	.0029	.0033	.0041	.0041
	2	1.5 x D	0.4 x D	1 x D	200	–	260	160	–	208	140	–	182	IPT	.0016	.0020	.0023	.0026	.0033	.0033
	3	1.5 x D	0.4 x D	1 x D	200	–	230	160	–	184	140	–	161	IPT	.0013	.0016	.0019	.0021	.0024	.0024
K	1	1.5 x D	0.5 x D	1 x D	390	–	490	351	–	441	351	–	441	IPT	.0023	.0029	.0034	.0037	.0042	.0042
	2	1.5 x D	0.5 x D	1 x D	360	–	460	324	–	414	324	–	414	IPT	.0019	.0025	.0029	.0033	.0041	.0041
	3	1.5 x D	0.5 x D	1 x D	360	–	430	324	–	387	324	–	387	IPT	.0016	.0020	.0023	.0026	.0033	.0033
S	1	1.5 x D	0.3 x D	0.3 x D	160	–	300	128	–	240	96	–	180	IPT	.0019	.0025	.0029	.0033	.0041	.0041
	2	1.5 x D	0.3 x D	0.3 x D	80	–	130	64	–	104	48	–	78	IPT	.0010	.0013	.0015	.0018	.0022	.0022
	3	1.5 x D	0.3 x D	0.3 x D	80	–	130	64	–	104	48	–	78	IPT	.0010	.0013	.0015	.0018	.0022	.0022
	4	1.5 x D	0.4 x D	1 x D	160	–	200	128	–	160	96	–	120	IPT	.0014	.0018	.0021	.0024	.0030	.0030
H	1	1.5 x D	0.4 x D	0.75 x D	260	–	460	208	–	368	156	–	276	IPT	.0017	.0022	.0026	.0029	.0034	.0034
	2	1.5 x D	0.2 x D	0.5 x D	230	–	390	184	–	312	138	–	234	IPT	.0013	.0016	.0019	.0021	.0024	.0024

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種