Country

言語

測定の単位

定価:

割引: %

定価:

$2,656.78 /各

価格::

数量

SDS

テーパーフランジマウントアダプター • CVF

Name: テーパーフランジマウントアダプター • CVF
SKU: 5996208
Rating: 0 (0 reviews)

メートル

インチ

SAP Material Number	5996208
ISO Catalog Number	CV60FBTF46245
ANSI Catalog Number	CV60FBTF46245
[D2] Body Diameter 1 Workpiece Side	117.48 mm
[D2] Body Diameter 1 Workpiece Side	4.625 in
[L1] Gage Length	62.245 mm
[L1] Gage Length	2.451 in
[CSMS] System Size Machine Side	CV60F
[CSWS] System Size Workpiece Side	BTF46
Weight Kilograms	13.57

すべての改良品を表示

使用法と用途

Shank: Flange Mount
バランス — G 6.3@15,000 min-1
スルークーラント：クーラント注入口AD
48909

特徴と利点

Designed for demanding applications like high-temperature alloy airframe structural parts machining.

Higher stability than any straight flange connection, adding unequaled bending moment resistance.

Large volume coolant supply through the center to support chip evacuation and to control heat in the cutting zone.

Specially designed drive keys for maximum torque transmission.

Six bolts for secure mounting.

Taper pilot ensures maximum tool stabilization.

Not interchangeable with CVKV-Taper Face Tooling.

機械側

荷重...

ワーク側

荷重...

Insert Selection Guide

Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)				(Strong geometry)
	wear resistance		<="" td="">		toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
M1–M2	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
M3	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
S3	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
S4	.S..GDH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
H1	–	–	–	–	–	–

Recommended Starting Feeds [IPT]

Light Machining

General Purpose

Heavy Machining

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	.007	.012	.018	.006	.010	.016	.005	.008	.013	.003	.005	.007	.S..GDH
P6	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
M1	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH
M2	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH
M3	.S..GDH	–	–	–	.007	.010	.015	.006	.009	.013	.005	.007	.011	.003	.004	.006	.S..GDH
S1	.S..GDH	–	–	–	.007	.008	.012	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S2	.S..GDH	–	–	–	.007	.008	.012	.006	.007	.011	.005	.006	.009	.003	.003	.005	.S..GDH
S3	.S..GDH	–	–	–	.007	.009	.014	.006	.008	.012	.005	.007	.010	.003	.004	.006	.S..GDH
S4	.S..GDH	–	–	–	.007	.011	.017	.006	.010	.015	.005	.008	.012	.003	.004	.007	.S..GDH

Recommended Starting Feeds [IPT]

HARVI™ Ultra 8X • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.004	0.007	0.008	0.003	0.005	0.006	0.002	0.004	0.005	0.002	0.004	0.005
HARVI Ultra 8X - SNHJ....S..GDH	0.005	0.008	0.010	0.004	0.006	0.008	0.003	0.005	0.007	0.003	0.005	0.006
KSSM8+ - SNPJ…..S..GD	0.007	0.015	0.023	0.005	0.011	0.017	0.004	0.009	0.015	0.004	0.009	0.014
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

推奨送り量の開始値 [mm]

		Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
Material	Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
P5	.S..GDH	–	–	–	0,18	0,29	0,45	0,16	0,26	0,40	0,13	0,21	0,33	0,07	0,12	0,18	.S..GDH
P6	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
M1	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH
M2	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH
M3	.S..GDH	–	–	–	0,18	0,24	0,38	0,16	0,22	0,34	0,13	0,18	0,27	0,07	0,10	0,15	.S..GDH
S1	.S..GDH	–	–	–	0,18	0,20	0,30	0,16	0,17	0,27	0,13	0,14	0,22	0,07	0,08	0,12	.S..GDH
S2	.S..GDH	–	–	–	0,18	0,20	0,30	0,16	0,17	0,27	0,13	0,14	0,22	0,07	0,08	0,12	.S..GDH
S3	.S..GDH	–	–	–	0,18	0,23	0,35	0,16	0,20	0,31	0,13	0,17	0,26	0,07	0,09	0,14	.S..GDH
S4	.S..GDH	–	–	–	0,18	0,28	0,43	0,16	0,25	0,38	0,13	0,20	0,31	0,07	0,11	0,17	.S..GDH

Light Machining

General Purpose

Heavy Machining

推奨送り量の開始値 [mm]

HARVI™ Ultra 8X • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.09	0.17	0.23	0.07	0.13	0.18	0.06	0.11	0.15	0.06	0.10	0.14
HARVI Ultra 8X - SNHJ....S..GDH	0.13	0.20	0.31	0.10	0.15	0.23	0.09	0.13	0.20	0.08	0.12	0.18
KSSM8+ - SNPJ…..S..GD	0,17	0,37	0,59	0,13	0,27	0,44	0,11	0,24	0,38	0,10	0,22	0,35
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Recommended Starting Speeds [SFM]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	390	355	315	820	450	410
	6	340	265	210	740	415	375
M	1	450	390	355	885	415	375
	2	410	340	290	885	415	375
	3	300	265	210	655	290	260
K	1
	2
	3
N	1
	2
	3
S	1	90	80	65	195	90	75
	2	90	80	65	165	90	70
	3	120	90	65	180	105	80
	4	145	120	80	260	150	115
H	1
	2
	3

HARVI™ Ultra 8X • Recommended Starting Speed [SFM]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1150	1050	985
	2	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	985	885	720
	3	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	920	785	640
	4	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	785	675	540
	5	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	655	590	525
	6	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	590	460	330
M	1	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	855	690	605
	2	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	770	590	475
	3	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	575	475	360
K	1	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	–	–	–
	2	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	–	–	–
	3	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	165	130	80
	2	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80
	3	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100
	4	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	245	195	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

推奨切削速度の開始値 [m/min]

Material Group		KC725M			KCSM40
P	1
	2
	3
	4
	5	120	110	95	250	138	125
	6	105	80	65	225	127	115
M	1	135	120	110	270	127	115
	2	125	105	90	270	127	115
	3	90	80	65	200	88	80
K	1
	2
	3
N	1
	2
	3
S	1	30	25	20	60	25	23
	2	30	25	20	50	23	21
	3	35	30	20	55	26	24
	4	45	35	25	80	39	35
H	1
	2
	3

推奨切削速度の開始値 [m/min]

HARVI™ Ultra 8X • Recommended Starting Speed [m/min]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	350	320	300
	2	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	300	270	220
	3	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	280	240	195
	4	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	240	205	165
	5	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	200	180	160
	6	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	180	140	100
M	1	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	260	210	185
	2	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	235	180	145
	3	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	175	145	110
K	1	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–
	2	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–
	3	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	50	40	25
	2	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	55	40	25
	3	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	65	45	30
	4	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	75	60	40
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

テーパーフランジマウントアダプター • CVF