Reaming

필터 선택
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (285)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (237)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (285)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (285)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (285)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (285)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (285)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (285)
  • M Stainless Steel (284)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (284)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (284)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (284)
  • K Cast Iron (261)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (261)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (261)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (261)
  • N Non-Ferrous Materials (69)
    • N1
      Wrought Aluminum (69)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (69)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (69)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (45)
  • S High-Temp Alloys (284)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (284)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (284)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (284)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (284)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (178)
  • Blind Hole Finishing Blind Hole Finishing (215)
  • Grooving Grooving (1)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (107)
  • Through Hole Finishing Through Hole Finishing (139)
Cutting Diameter
Cutting Diameter
  • 0.197 in (8)
  • 0.217 in (8)
  • 0.237 in (10)
  • 0.25 in (2)
  • 0.256 in (8)
  • 0.276 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.354 in (8)
  • 0.375 in (2)
  • 0.394 in (10)
  • 0.433 in (8)
  • 0.438 in (2)
  • 0.473 in (10)
  • 0.5 in (2)
  • 0.512 in (8)
  • 0.551 in (18)
  • 0.564 in (4)
  • 0.591 in (8)
  • 0.625 in (3)
  • 0.63 in (10)
  • 0.669 in (8)
  • 0.689 in (4)
  • 0.709 in (10)
  • 0.743 in (4)
  • 0.748 in (9)
  • 0.75 in (6)
  • 0.787 in (10)
  • 0.828 in (6)
  • 0.866 in (7)
  • 0.875 in (4)
  • 0.876 in (1)
  • 0.906 in (6)
  • 0.939 in (4)
  • 0.946 in (6)
  • 0.984 in (7)
  • 1.0 in (5)
  • 1.024 in (6)
  • 1.063 in (6)
  • 1.102 in (7)
  • 1.125 in (1)
  • 1.143 in (2)
  • 1.181 in (7)
  • 1.22 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.299 in (2)
  • 1.339 in (6)
  • 1.379 in (2)
  • 1.417 in (7)
  • 1.438 in (1)
  • 1.457 in (2)
  • 1.496 in (6)
  • 1.536 in (2)
  • 1.563 in (1)
  • 1.575 in (7)
  • 1.614 in (2)
  • 1.653 in (1)
  • 1.655 in (7)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (8)
  • 5.5 mm (8)
  • 6.0 mm (10)
  • 6.351 mm (2)
  • 6.5 mm (8)
  • 7.0 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.0 mm (8)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 11.0 mm (8)
  • 11.125 mm (2)
  • 12.0 mm (10)
  • 12.701 mm (2)
  • 13.0 mm (8)
  • 14.0 mm (18)
  • 14.3 mm (4)
  • 15.0 mm (8)
  • 15.875 mm (3)
  • 16.0 mm (10)
  • 17.0 mm (8)
  • 17.475 mm (4)
  • 18.0 mm (10)
  • 18.875 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (6)
  • 20.0 mm (10)
  • 21.0 mm (6)
  • 22.0 mm (7)
  • 22.225 mm (4)
  • 22.25 mm (1)
  • 23.0 mm (6)
  • 23.826 mm (4)
  • 24.0 mm (6)
  • 25.0 mm (7)
  • 25.401 mm (5)
  • 26.0 mm (6)
  • 27.0 mm (6)
  • 28.0 mm (7)
  • 28.576 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (7)
  • 31.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 33.0 mm (2)
  • 34.0 mm (6)
  • 35.0 mm (2)
  • 36.0 mm (7)
  • 36.525 mm (1)
  • 37.0 mm (2)
  • 38.0 mm (6)
  • 39.0 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (7)
  • 41.0 mm (2)
  • 41.95 mm (1)
  • 42.0 mm (7)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Reach
Reach
  • 0.968 in (1)
  • 1.01 in (1)
  • 1.045 in (1)
  • 1.969 in (1)
  • 2.045 in (1)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 24.576 mm (1)
  • 25.625 mm (1)
  • 26.55 mm (1)
  • 50.0 mm (1)
  • 51.95 mm (1)
Reach Min 받는 사람 Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (5)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (140)
  • Whistle Notch 2 (3)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (1)
  • 4 (64)
  • 6 (178)
  • 8 (88)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (4)
  • 4.0 (65)
Cutting Edges Per Insert Min 받는 사람 Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.875 in (2)
  • 3.976 in (1)
  • 4.875 in (2)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 98.426 mm (2)
  • 101.0 mm (1)
  • 123.825 mm (2)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (1)
  • 0.016 in (3)
  • 0.02 in (2)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (1)
  • 0.4 mm (3)
  • 0.5 mm (2)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (76)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (76)
Corner Chamfer Min 받는 사람 Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K605 (24)
  • KB1610 (2)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC6005 (76)
  • KC6105 (17)
  • KC6305 (98)
  • KCU05 (72)
  • KCU05A (48)
  • KCU45 (7)
  • KD1415 (48)
  • KT6215 (1)
  • KT6225 (1)
  • KT6315 (2)
Hand Of Tool
Hand Of Tool
  • R (335)
Wiper Insert
Wiper Insert
  • N (71)
Helix Hand
Helix Hand
  • L (118)
  • N (187)
  • R (25)
Lead in Length
Lead in Length
  • 0.2 mm (45)
  • 0.301 mm (6)
  • 0.4 mm (26)
  • 0.5 mm (110)
  • 0.601 mm (12)
  • 0.701 mm (5)
  • 0.75 mm (6)
  • 0.8 mm (3)
  • 0.9 mm (4)
  • 0.951 mm (10)
  • 1.1 mm (95)
  • 1.151 mm (8)
Lead in Length Min 받는 사람 Lead in Length Max
Lead In Length
Lead In Length
  • 0.0 in (51)
  • 0.001 in (165)
  • 0.002 in (113)
  • 0.038 in (1)
Lead In Length Min 받는 사람 Lead In Length Max
frontEnd
Cutting Width
Cutting Width
  • 0.119 in (1)
  • 0.125 in (1)
Cutting Width Min 받는 사람 Cutting Width Max
Cutting Width
Cutting Width
  • 3.0 mm (1)
  • 3.176 mm (1)
Cutting Width Min 받는 사람 Cutting Width Max
Insert Shape
Insert Shape
  • GROOVING/CUTOFF MISC (7)
  • L-RECTANGLE 90 (4)
  • S-SQUARE 90 (65)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.039 in (5)
Maximum Cutting Depth Min 받는 사람 Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.0 mm (5)
Maximum Cutting Depth Min 받는 사람 Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.969 in (1)
  • 2.362 in (4)
  • 2.402 in (1)
  • 2.48 in (4)
  • 2.598 in (2)
  • 2.677 in (1)
  • 2.757 in (1)
  • 3.543 in (3)
  • 3.583 in (1)
  • 3.898 in (1)
  • 3.938 in (5)
  • 4.094 in (1)
  • 4.173 in (1)
  • 4.469 in (2)
  • 4.529 in (1)
  • 4.843 in (1)
  • 5.021 in (1)
  • 5.138 in (2)
  • 5.315 in (1)
  • 5.748 in (1)
  • 6.005 in (2)
  • 6.083 in (1)
  • 6.24 in (2)
  • 6.851 in (2)
  • 7.303 in (2)
  • 7.48 in (2)
  • 8.563 in (2)
  • 9.803 in (2)
  • 10.787 in (2)
Gage Length
Gage Length
  • 100 mm (5)
  • 60 mm (4)
  • 63 mm (4)
  • 90 mm (3)
  • 174 mm (2)
  • 190 mm (2)
  • 249 mm (2)
  • 274 mm (2)
  • 66 mm (2)
  • 104 mm (1)
  • 106 mm (1)
  • 115 mm (1)
  • 123 mm (1)
  • 135 mm (1)
  • 146 mm (1)
  • 50 mm (1)
  • 61 mm (1)
  • 68 mm (1)
  • 70 mm (1)
  • 91 mm (1)
  • 99 mm (1)
  • 113.5 mm (2)
  • 127.5 mm (1)
  • 130.5 mm (2)
  • 152.5 mm (2)
  • 154.5 mm (1)
  • 158.5 mm (2)
  • 185.5 mm (2)
  • 217.5 mm (2)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • GROOVING/CUTOFF MISC (2)
  • L-RECTANGLE 90 (4)
  • S-SQUARE 90 (65)
Insert IC Size
Insert IC Size
  • 6.0 mm (30)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (29)
Insert IC Size Min 받는 사람 Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.237 in (30)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (29)
Insert IC Size Min 받는 사람 Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.0 mm (5)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (4)
  • 9.05 mm (1)
  • 14.476 mm (1)
  • 18.0 mm (1)
  • 27.0 mm (1)
  • 45.0 mm (1)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.237 in (5)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (4)
  • 0.356 in (1)
  • 0.571 in (1)
  • 0.709 in (1)
  • 1.063 in (1)
  • 1.772 in (1)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • FB (1)
  • FT (2)
  • S (10)
Cutting Tool Material
Cutting Tool Material
  • B H (12)
  • D P (3)
  • H T (3)
  • H W (53)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (143)
  • SHORT TAPER (192)
System Size
System Size
  • BT40 (1)
  • BT50 (2)
  • CV40 (1)
  • CV50 (2)
  • DV40 (1)
  • DV50 (2)
  • HSK100A (2)
  • HSK63A (2)
  • HSK80A (1)
  • SIF100 (3)
  • SIF70 (6)
  • SIF80 (3)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (26)
  • 6.351 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (26)
  • 9.525 mm (2)
  • 10.0 mm (18)
  • 11.101 mm (2)
  • 11.5 mm (16)
  • 12.0 mm (18)
  • 12.701 mm (2)
  • 13.5 mm (16)
  • 14.0 mm (18)
  • 15.5 mm (17)
  • 15.875 mm (2)
  • 16.0 mm (8)
  • 17.5 mm (26)
  • 18.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (66)
  • 25.0 mm (35)
  • 30.0 mm (20)
  • 32.0 mm (8)
  • 35.0 mm (26)
  • 37.5 mm (5)
  • 44.45 mm (3)
  • 57.5 mm (3)
  • 63.0 mm (2)
  • 69.851 mm (6)
  • 70.0 mm (4)
  • 80.0 mm (1)
  • 100.0 mm (2)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (26)
  • 0.25 in (2)
  • 0.313 in (2)
  • 0.315 in (26)
  • 0.375 in (2)
  • 0.394 in (18)
  • 0.437 in (2)
  • 0.453 in (16)
  • 0.473 in (18)
  • 0.5 in (2)
  • 0.531 in (16)
  • 0.551 in (18)
  • 0.61 in (17)
  • 0.625 in (2)
  • 0.63 in (8)
  • 0.69 in (26)
  • 0.709 in (2)
  • 0.75 in (3)
  • 0.787 in (66)
  • 0.984 in (35)
  • 1.181 in (20)
  • 1.26 in (8)
  • 1.379 in (26)
  • 1.476 in (5)
  • 1.75 in (3)
  • 2.265 in (3)
  • 2.48 in (2)
  • 2.75 in (6)
  • 2.757 in (4)
  • 3.15 in (1)
  • 3.938 in (2)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
No filters matching ""