솔리드 초경 드릴

필터 선택
Filters
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (5968)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5493)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5493)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (5493)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (5493)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (5569)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (5938)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (5938)
  • M Stainless Steel (4164)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (4164)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (4164)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (4164)
  • K Cast Iron (4757)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (4757)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (4662)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (4662)
  • N Non-Ferrous Materials (3816)
    • N1
      Wrought Aluminum (3796)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3816)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (3816)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3796)
  • S High-Temp Alloys (4016)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3833)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3833)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3833)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (4016)
  • H Hardened Materials (2031)
    • H1
      Hardened Materials 44-48 HRC (2031)
    • H2
      Hardened Materials 48-55 HRC (1851)
    • H3
      Hardened Materials 56-60 HRC (76)
    • H4
      Hardened Materials >60 HRC (76)
  • C CFRP Materials (28)
    • C1
      CFRP, CFRP / CFRP (10)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (18)
    • C3
      CFRP / Titanium CFRP / High Temp (18)
    • C4
      CFRP / Stainless Steel (18)
1차 선택 선택
  • BR (157)
  • CN (881)
  • DE (856)
  • GB (568)
  • IN (182)
  • SG (297)
  • US (1137)
Applications
Applications
  • Convex Drilling Convex Drilling (337)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (208)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1199)
  • Counterboring Counterboring (208)
  • Countersinking Countersinking (194)
  • Cross Hole Drilling Cross Hole Drilling (3145)
  • Drilling Drilling (6836)
  • Flat Bottom Drilling Flat Bottom Drilling (208)
  • Inclined Entry Drilling Inclined Entry Drilling (303)
  • Inclined Exit Drilling Inclined Exit Drilling (3067)
  • Stacked Plates Drilling Stacked Plates Drilling (6027)
Cutting Diameter
Cutting Diameter
  • 0.0 in (1)
  • 0.039 in (11)
  • 0.04 in (3)
  • 0.041 in (2)
  • 0.042 in (3)
  • 0.044 in (11)
  • 0.046 in (3)
  • 0.047 in (13)
  • 0.052 in (10)
  • 0.053 in (3)
  • 0.055 in (13)
  • 0.06 in (13)
  • 0.063 in (12)
  • 0.067 in (12)
  • 0.072 in (12)
  • 0.075 in (12)
  • 0.078 in (5)
  • 0.079 in (13)
  • 0.083 in (12)
  • 0.088 in (12)
  • 0.091 in (12)
  • 0.094 in (18)
  • 0.095 in (20)
  • 0.096 in (9)
  • 0.098 in (46)
  • 0.099 in (1)
  • 0.101 in (7)
  • 0.103 in (18)
  • 0.105 in (8)
  • 0.106 in (20)
  • 0.109 in (11)
  • 0.11 in (21)
  • 0.111 in (8)
  • 0.113 in (8)
  • 0.114 in (17)
  • 0.116 in (6)
  • 0.119 in (64)
  • 0.12 in (13)
  • 0.122 in (28)
  • 0.124 in (1)
  • 0.125 in (58)
  • 0.126 in (36)
  • 0.128 in (1)
  • 0.129 in (24)
  • 0.13 in (42)
  • 0.134 in (29)
  • 0.136 in (28)
  • 0.137 in (1)
  • 0.138 in (58)
  • 0.14 in (1)
  • 0.142 in (20)
  • 0.143 in (30)
  • 0.145 in (11)
  • 0.146 in (33)
  • 0.147 in (15)
  • 0.15 in (36)
  • 0.151 in (1)
  • 0.152 in (4)
  • 0.154 in (29)
  • 0.156 in (48)
  • 0.157 in (69)
  • 0.159 in (19)
  • 0.16 in (1)
  • 0.161 in (40)
  • 0.162 in (1)
  • 0.163 in (2)
  • 0.165 in (52)
  • 0.166 in (11)
  • 0.169 in (39)
  • 0.173 in (16)
  • 0.174 in (25)
  • 0.176 in (1)
  • 0.177 in (70)
  • 0.178 in (1)
  • 0.179 in (2)
  • 0.18 in (3)
  • 0.181 in (31)
  • 0.182 in (15)
  • 0.183 in (5)
  • 0.185 in (31)
  • 0.187 in (2)
  • 0.188 in (51)
  • 0.189 in (46)
  • 0.19 in (5)
  • 0.191 in (14)
  • 0.193 in (30)
  • 0.194 in (3)
  • 0.197 in (73)
  • 0.198 in (1)
  • 0.199 in (6)
  • 0.2 in (1)
  • 0.201 in (75)
  • 0.203 in (21)
  • 0.206 in (46)
  • 0.208 in (7)
  • 0.209 in (31)
  • 0.213 in (56)
  • 0.217 in (65)
  • 0.218 in (1)
  • 0.219 in (56)
  • 0.221 in (44)
  • 0.222 in (1)
  • 0.224 in (28)
  • 0.228 in (55)
  • 0.232 in (26)
  • 0.234 in (18)
  • 0.237 in (72)
  • 0.239 in (1)
  • 0.24 in (32)
  • 0.242 in (1)
  • 0.244 in (42)
  • 0.248 in (30)
  • 0.25 in (70)
  • 0.252 in (30)
  • 0.253 in (1)
  • 0.256 in (65)
  • 0.257 in (33)
  • 0.26 in (36)
  • 0.261 in (11)
  • 0.262 in (2)
  • 0.264 in (29)
  • 0.265 in (1)
  • 0.266 in (44)
  • 0.268 in (61)
  • 0.272 in (40)
  • 0.276 in (72)
  • 0.277 in (2)
  • 0.28 in (28)
  • 0.281 in (50)
  • 0.284 in (23)
  • 0.288 in (23)
  • 0.289 in (1)
  • 0.29 in (2)
  • 0.291 in (37)
  • 0.295 in (52)
  • 0.297 in (30)
  • 0.299 in (19)
  • 0.303 in (21)
  • 0.307 in (36)
  • 0.311 in (17)
  • 0.313 in (62)
  • 0.315 in (74)
  • 0.316 in (2)
  • 0.318 in (1)
  • 0.319 in (31)
  • 0.323 in (32)
  • 0.327 in (17)
  • 0.328 in (40)
  • 0.331 in (26)
  • 0.332 in (22)
  • 0.335 in (73)
  • 0.336 in (1)
  • 0.337 in (1)
  • 0.339 in (30)
  • 0.343 in (34)
  • 0.345 in (51)
  • 0.347 in (40)
  • 0.348 in (1)
  • 0.349 in (2)
  • 0.351 in (15)
  • 0.354 in (68)
  • 0.356 in (1)
  • 0.358 in (33)
  • 0.359 in (34)
  • 0.362 in (17)
  • 0.366 in (26)
  • 0.368 in (13)
  • 0.37 in (19)
  • 0.374 in (49)
  • 0.375 in (62)
  • 0.376 in (1)
  • 0.378 in (17)
  • 0.382 in (25)
  • 0.384 in (8)
  • 0.386 in (36)
  • 0.39 in (19)
  • 0.391 in (32)
  • 0.394 in (74)
  • 0.398 in (21)
  • 0.402 in (60)
  • 0.404 in (3)
  • 0.406 in (31)
  • 0.408 in (43)
  • 0.41 in (25)
  • 0.414 in (67)
  • 0.417 in (17)
  • 0.421 in (21)
  • 0.422 in (45)
  • 0.425 in (35)
  • 0.427 in (1)
  • 0.429 in (10)
  • 0.433 in (66)
  • 0.434 in (1)
  • 0.437 in (22)
  • 0.438 in (37)
  • 0.441 in (27)
  • 0.445 in (18)
  • 0.447 in (1)
  • 0.449 in (15)
  • 0.453 in (87)
  • 0.455 in (1)
  • 0.456 in (1)
  • 0.457 in (14)
  • 0.461 in (24)
  • 0.465 in (41)
  • 0.47 in (39)
  • 0.473 in (72)
  • 0.477 in (20)
  • 0.48 in (20)
  • 0.484 in (49)
  • 0.488 in (13)
  • 0.492 in (63)
  • 0.496 in (13)
  • 0.5 in (65)
  • 0.504 in (23)
  • 0.508 in (15)
  • 0.512 in (58)
  • 0.515 in (1)
  • 0.516 in (37)
  • 0.52 in (9)
  • 0.524 in (15)
  • 0.528 in (7)
  • 0.531 in (62)
  • 0.535 in (8)
  • 0.539 in (15)
  • 0.543 in (20)
  • 0.547 in (16)
  • 0.551 in (67)
  • 0.555 in (18)
  • 0.559 in (16)
  • 0.564 in (56)
  • 0.568 in (7)
  • 0.572 in (49)
  • 0.576 in (13)
  • 0.578 in (10)
  • 0.579 in (12)
  • 0.583 in (12)
  • 0.587 in (7)
  • 0.591 in (56)
  • 0.594 in (5)
  • 0.595 in (18)
  • 0.598 in (12)
  • 0.6 in (3)
  • 0.602 in (17)
  • 0.606 in (11)
  • 0.609 in (5)
  • 0.61 in (36)
  • 0.614 in (12)
  • 0.618 in (12)
  • 0.622 in (16)
  • 0.625 in (39)
  • 0.626 in (8)
  • 0.63 in (56)
  • 0.633 in (3)
  • 0.634 in (10)
  • 0.635 in (1)
  • 0.638 in (11)
  • 0.641 in (4)
  • 0.642 in (8)
  • 0.646 in (8)
  • 0.65 in (36)
  • 0.654 in (5)
  • 0.656 in (14)
  • 0.657 in (7)
  • 0.661 in (9)
  • 0.665 in (4)
  • 0.669 in (40)
  • 0.672 in (1)
  • 0.673 in (6)
  • 0.677 in (6)
  • 0.681 in (5)
  • 0.685 in (4)
  • 0.687 in (5)
  • 0.689 in (20)
  • 0.69 in (38)
  • 0.694 in (7)
  • 0.698 in (11)
  • 0.702 in (8)
  • 0.704 in (5)
  • 0.705 in (7)
  • 0.709 in (41)
  • 0.713 in (5)
  • 0.717 in (7)
  • 0.719 in (5)
  • 0.72 in (5)
  • 0.724 in (5)
  • 0.728 in (25)
  • 0.732 in (6)
  • 0.734 in (5)
  • 0.736 in (7)
  • 0.74 in (7)
  • 0.744 in (5)
  • 0.748 in (31)
  • 0.75 in (24)
  • 0.752 in (5)
  • 0.754 in (1)
  • 0.756 in (7)
  • 0.758 in (2)
  • 0.76 in (5)
  • 0.764 in (5)
  • 0.766 in (2)
  • 0.768 in (20)
  • 0.772 in (2)
  • 0.776 in (7)
  • 0.78 in (8)
  • 0.781 in (3)
  • 0.784 in (5)
  • 0.787 in (33)
  • 0.807 in (3)
  • 0.81 in (1)
  • 0.828 in (8)
  • 0.866 in (1)
  • 0.906 in (2)
  • 0.946 in (2)
  • 0.965 in (1)
  • 0.984 in (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.0 mm (1)
  • 1.0 mm (11)
  • 1.026 mm (3)
  • 1.05 mm (2)
  • 1.075 mm (3)
  • 1.1 mm (11)
  • 1.175 mm (3)
  • 1.201 mm (13)
  • 1.3 mm (10)
  • 1.326 mm (3)
  • 1.401 mm (13)
  • 1.5 mm (13)
  • 1.6 mm (12)
  • 1.701 mm (12)
  • 1.8 mm (12)
  • 1.901 mm (12)
  • 1.975 mm (5)
  • 2.0 mm (13)
  • 2.1 mm (12)
  • 2.2 mm (12)
  • 2.301 mm (12)
  • 2.375 mm (18)
  • 2.401 mm (20)
  • 2.45 mm (9)
  • 2.5 mm (46)
  • 2.526 mm (1)
  • 2.575 mm (7)
  • 2.6 mm (18)
  • 2.651 mm (8)
  • 2.7 mm (20)
  • 2.776 mm (11)
  • 2.801 mm (21)
  • 2.825 mm (8)
  • 2.875 mm (8)
  • 2.901 mm (17)
  • 2.95 mm (6)
  • 3.0 mm (64)
  • 3.051 mm (13)
  • 3.1 mm (28)
  • 3.151 mm (1)
  • 3.176 mm (58)
  • 3.2 mm (36)
  • 3.25 mm (1)
  • 3.276 mm (24)
  • 3.301 mm (42)
  • 3.401 mm (29)
  • 3.45 mm (28)
  • 3.475 mm (1)
  • 3.5 mm (58)
  • 3.551 mm (1)
  • 3.575 mm (20)
  • 3.6 mm (30)
  • 3.651 mm (11)
  • 3.7 mm (33)
  • 3.725 mm (15)
  • 3.801 mm (36)
  • 3.825 mm (1)
  • 3.85 mm (4)
  • 3.901 mm (29)
  • 3.95 mm (1)
  • 3.975 mm (47)
  • 4.0 mm (69)
  • 4.05 mm (19)
  • 4.075 mm (1)
  • 4.101 mm (40)
  • 4.125 mm (1)
  • 4.15 mm (2)
  • 4.2 mm (52)
  • 4.226 mm (11)
  • 4.3 mm (39)
  • 4.375 mm (16)
  • 4.4 mm (25)
  • 4.476 mm (1)
  • 4.5 mm (70)
  • 4.525 mm (1)
  • 4.55 mm (2)
  • 4.575 mm (3)
  • 4.601 mm (31)
  • 4.625 mm (15)
  • 4.65 mm (5)
  • 4.7 mm (31)
  • 4.75 mm (2)
  • 4.775 mm (51)
  • 4.801 mm (46)
  • 4.825 mm (5)
  • 4.851 mm (14)
  • 4.9 mm (30)
  • 4.926 mm (3)
  • 5.0 mm (73)
  • 5.025 mm (1)
  • 5.051 mm (6)
  • 5.075 mm (1)
  • 5.101 mm (75)
  • 5.15 mm (21)
  • 5.2 mm (46)
  • 5.25 mm (7)
  • 5.301 mm (31)
  • 5.4 mm (56)
  • 5.5 mm (65)
  • 5.525 mm (1)
  • 5.551 mm (55)
  • 5.575 mm (1)