장바구니에 성공적으로 추가되었습니다
장바구니 보기

알림

모두 읽음으로 표시
Mobile Menu
Read More

표준 관통 쿨런트 공급으로 최대 8xD의 고속, 고이송 드릴링.

특허받은 코너R - 긴 공구 수명과 우수한 홀 품질을 지원하고 출구면 작업 중 피삭재 치핑을 방지합니다.

특허받은 HPR 포인트 시닝 - 저 추력으로 뛰어난 셀프 센터링 성능을 제공하여 탁월한 홀 직진도를 가능하게 합니다.

4개의 마진 랜드 - 크로스 홀과 경사진 출구면에 이상적이며 최대 안정성을 제공합니다.

초 고광택 플루트 - 마찰을 최소화하고 칩 배출 및 공구 수명을 개선합니다.

MQL 표준 준수 - 모든 섕크가 최소 윤활량에 대한 DIN 6535 및 69090-03 요구 사항을 충족합니다.

필터 선택
Filters
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (460)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (460)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (460)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (460)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (460)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (460)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (460)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (460)
  • K Cast Iron (460)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (460)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (460)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (460)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (460)
  • Drilling Drilling (460)
  • Inclined Exit Drilling Inclined Exit Drilling (460)
  • Stacked Plates Drilling Stacked Plates Drilling (460)
Cutting Diameter
Cutting Diameter
  • 0.119 in (3)
  • 0.122 in (3)
  • 0.125 in (5)
  • 0.126 in (4)
  • 0.129 in (4)
  • 0.13 in (3)
  • 0.134 in (3)
  • 0.136 in (5)
  • 0.138 in (4)
  • 0.143 in (3)
  • 0.145 in (2)
  • 0.146 in (3)
  • 0.15 in (4)
  • 0.154 in (3)
  • 0.156 in (4)
  • 0.157 in (4)
  • 0.159 in (2)
  • 0.161 in (4)
  • 0.165 in (4)
  • 0.169 in (3)
  • 0.174 in (2)
  • 0.177 in (4)
  • 0.181 in (4)
  • 0.185 in (3)
  • 0.188 in (6)
  • 0.189 in (4)
  • 0.193 in (3)
  • 0.197 in (4)
  • 0.201 in (7)
  • 0.206 in (4)
  • 0.209 in (3)
  • 0.213 in (5)
  • 0.217 in (4)
  • 0.219 in (6)
  • 0.221 in (3)
  • 0.224 in (3)
  • 0.228 in (4)
  • 0.237 in (4)
  • 0.24 in (4)
  • 0.244 in (4)
  • 0.248 in (3)
  • 0.25 in (6)
  • 0.252 in (3)
  • 0.256 in (4)
  • 0.257 in (3)
  • 0.26 in (3)
  • 0.264 in (3)
  • 0.266 in (4)
  • 0.268 in (4)
  • 0.276 in (5)
  • 0.281 in (5)
  • 0.291 in (3)
  • 0.295 in (3)
  • 0.297 in (3)
  • 0.307 in (3)
  • 0.313 in (5)
  • 0.315 in (4)
  • 0.319 in (3)
  • 0.323 in (3)
  • 0.328 in (4)
  • 0.335 in (3)
  • 0.345 in (5)
  • 0.347 in (3)
  • 0.354 in (4)
  • 0.358 in (3)
  • 0.359 in (4)
  • 0.374 in (3)
  • 0.375 in (5)
  • 0.386 in (3)
  • 0.391 in (4)
  • 0.394 in (4)
  • 0.402 in (3)
  • 0.406 in (3)
  • 0.408 in (5)
  • 0.414 in (4)
  • 0.422 in (4)
  • 0.425 in (3)
  • 0.433 in (3)
  • 0.438 in (5)
  • 0.453 in (7)
  • 0.465 in (3)
  • 0.47 in (4)
  • 0.473 in (4)
  • 0.484 in (4)
  • 0.492 in (3)
  • 0.5 in (6)
  • 0.512 in (3)
  • 0.516 in (3)
  • 0.531 in (5)
  • 0.551 in (4)
  • 0.564 in (5)
  • 0.572 in (3)
  • 0.591 in (3)
  • 0.61 in (3)
  • 0.625 in (3)
  • 0.63 in (3)
  • 0.65 in (3)
  • 0.669 in (3)
  • 0.69 in (3)
  • 0.709 in (3)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (3)
  • 3.1 mm (3)
  • 3.176 mm (5)
  • 3.2 mm (4)
  • 3.276 mm (4)
  • 3.301 mm (3)
  • 3.401 mm (3)
  • 3.45 mm (5)
  • 3.5 mm (4)
  • 3.6 mm (3)
  • 3.651 mm (2)
  • 3.7 mm (3)
  • 3.801 mm (4)
  • 3.901 mm (3)
  • 3.975 mm (4)
  • 4.0 mm (4)
  • 4.05 mm (2)
  • 4.101 mm (4)
  • 4.2 mm (4)
  • 4.3 mm (3)
  • 4.4 mm (2)
  • 4.5 mm (4)
  • 4.601 mm (4)
  • 4.7 mm (3)
  • 4.775 mm (6)
  • 4.801 mm (4)
  • 4.9 mm (3)
  • 5.0 mm (4)
  • 5.101 mm (7)
  • 5.2 mm (4)
  • 5.301 mm (3)
  • 5.4 mm (5)
  • 5.5 mm (4)
  • 5.551 mm (6)
  • 5.601 mm (3)
  • 5.7 mm (3)
  • 5.801 mm (4)
  • 6.0 mm (4)
  • 6.101 mm (4)
  • 6.2 mm (4)
  • 6.301 mm (3)
  • 6.351 mm (6)
  • 6.4 mm (3)
  • 6.5 mm (4)
  • 6.525 mm (3)
  • 6.601 mm (3)
  • 6.7 mm (3)
  • 6.75 mm (4)
  • 6.801 mm (4)
  • 7.0 mm (5)
  • 7.15 mm (5)
  • 7.4 mm (3)
  • 7.5 mm (3)
  • 7.551 mm (3)
  • 7.801 mm (3)
  • 7.95 mm (5)
  • 8.0 mm (4)
  • 8.1 mm (3)
  • 8.201 mm (3)
  • 8.326 mm (4)
  • 8.5 mm (3)
  • 8.725 mm (5)
  • 8.8 mm (3)
  • 9.0 mm (4)
  • 9.1 mm (3)
  • 9.125 mm (4)
  • 9.5 mm (3)
  • 9.525 mm (5)
  • 9.8 mm (3)
  • 9.925 mm (4)
  • 10.0 mm (4)
  • 10.201 mm (3)
  • 10.3 mm (3)
  • 10.326 mm (5)
  • 10.5 mm (4)
  • 10.726 mm (4)
  • 10.8 mm (3)
  • 11.0 mm (3)
  • 11.125 mm (5)
  • 11.5 mm (7)
  • 11.8 mm (3)
  • 11.9 mm (4)
  • 12.0 mm (4)
  • 12.3 mm (4)
  • 12.5 mm (3)
  • 12.701 mm (6)
  • 13.0 mm (3)
  • 13.101 mm (3)
  • 13.5 mm (5)
  • 14.0 mm (4)
  • 14.3 mm (5)
  • 14.5 mm (3)
  • 15.0 mm (3)
  • 15.5 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (3)
  • 16.5 mm (3)
  • 17.0 mm (3)
  • 17.5 mm (3)
  • 18.0 mm (3)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (12)
  • 17.0 mm (11)
  • 17.401 mm (3)
  • 20.0 mm (17)
  • 21.401 mm (8)
  • 22.6 mm (1)
  • 23.0 mm (13)
  • 24.0 mm (11)
  • 25.901 mm (2)
  • 28.3 mm (5)
  • 28.6 mm (9)
  • 29.0 mm (20)
  • 31.75 mm (1)
  • 33.0 mm (10)
  • 34.7 mm (4)
  • 34.9 mm (15)
  • 35.0 mm (33)
  • 38.1 mm (5)
  • 39.6 mm (4)
  • 40.0 mm (10)
  • 40.301 mm (10)
  • 41.0 mm (9)
  • 43.0 mm (34)
  • 45.0 mm (6)
  • 46.5 mm (1)
  • 48.0 mm (14)
  • 48.7 mm (9)
  • 49.0 mm (25)
  • 50.801 mm (2)
  • 51.0 mm (4)
  • 53.1 mm (6)
  • 55.0 mm (3)
  • 55.6 mm (5)
  • 56.0 mm (23)
  • 57.0 mm (10)
  • 60.0 mm (21)
  • 63.0 mm (12)
  • 63.5 mm (3)
  • 64.0 mm (4)
  • 64.5 mm (1)
  • 71.0 mm (8)
  • 73.0 mm (2)
  • 74.5 mm (1)
  • 76.2 mm (4)
  • 77.0 mm (5)
  • 80.0 mm (11)
  • 88.9 mm (4)
  • 96.0 mm (10)
  • 101.601 mm (2)
  • 112.0 mm (7)
  • 114.301 mm (1)
  • 128.0 mm (5)
  • 144.0 mm (4)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.551 in (12)
  • 0.669 in (11)
  • 0.685 in (3)
  • 0.787 in (17)
  • 0.843 in (8)
  • 0.89 in (1)
  • 0.906 in (13)
  • 0.946 in (11)
  • 1.02 in (2)
  • 1.114 in (5)
  • 1.127 in (9)
  • 1.143 in (20)
  • 1.25 in (1)
  • 1.299 in (10)
  • 1.366 in (4)
  • 1.374 in (15)
  • 1.379 in (33)
  • 1.5 in (5)
  • 1.559 in (4)
  • 1.575 in (10)
  • 1.587 in (10)
  • 1.614 in (9)
  • 1.693 in (34)
  • 1.772 in (6)
  • 1.831 in (1)
  • 1.891 in (14)
  • 1.917 in (9)
  • 1.929 in (25)
  • 2.0 in (2)
  • 2.008 in (4)
  • 2.091 in (6)
  • 2.165 in (3)
  • 2.189 in (5)
  • 2.205 in (23)
  • 2.244 in (10)
  • 2.362 in (21)
  • 2.48 in (12)
  • 2.5 in (3)
  • 2.52 in (4)
  • 2.539 in (1)
  • 2.795 in (8)
  • 2.874 in (2)
  • 2.934 in (1)
  • 3.0 in (4)
  • 3.031 in (5)
  • 3.15 in (11)
  • 3.5 in (4)
  • 3.781 in (10)
  • 4.0 in (2)
  • 4.409 in (7)
  • 4.5 in (1)
  • 5.039 in (5)
  • 5.67 in (4)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (12)
  • 0.906 in (3)
  • 0.946 in (11)
  • 1.063 in (8)
  • 1.102 in (30)
  • 1.143 in (1)
  • 1.339 in (13)
  • 1.379 in (9)
  • 1.417 in (12)
  • 1.46 in (1)
  • 1.496 in (5)
  • 1.575 in (10)
  • 1.614 in (8)
  • 1.693 in (15)
  • 1.732 in (20)
  • 1.77 in (1)
  • 1.811 in (4)
  • 1.85 in (13)
  • 1.929 in (9)
  • 1.969 in (10)
  • 2.008 in (4)
  • 2.087 in (26)
  • 2.126 in (4)
  • 2.165 in (10)
  • 2.205 in (14)
  • 2.32 in (2)
  • 2.323 in (2)
  • 2.362 in (15)
  • 2.402 in (25)
  • 2.52 in (1)
  • 2.559 in (6)
  • 2.598 in (6)
  • 2.638 in (10)
  • 2.757 in (5)
  • 2.795 in (23)
  • 2.87 in (3)
  • 2.874 in (4)
  • 2.914 in (4)
  • 2.992 in (5)
  • 3.031 in (16)
  • 3.11 in (3)
  • 3.228 in (1)
  • 3.269 in (12)
  • 3.46 in (4)
  • 3.622 in (13)
  • 3.661 in (8)
  • 3.74 in (1)
  • 3.976 in (5)
  • 4.021 in (4)
  • 4.331 in (10)
  • 4.57 in (2)
  • 5.039 in (7)
  • 5.12 in (1)
  • 5.748 in (5)
  • 6.417 in (4)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 20.0 mm (12)
  • 23.0 mm (3)
  • 24.0 mm (11)
  • 27.0 mm (8)
  • 28.0 mm (30)
  • 29.0 mm (1)
  • 34.0 mm (13)
  • 35.0 mm (9)
  • 36.0 mm (12)
  • 37.075 mm (1)
  • 38.0 mm (5)
  • 40.0 mm (10)
  • 41.0 mm (8)
  • 43.0 mm (15)
  • 44.0 mm (20)
  • 44.95 mm (1)
  • 46.0 mm (4)
  • 47.0 mm (13)
  • 49.0 mm (9)
  • 50.0 mm (10)
  • 51.0 mm (4)
  • 53.0 mm (26)
  • 54.0 mm (4)
  • 55.0 mm (10)
  • 56.0 mm (14)
  • 58.926 mm (2)
  • 59.0 mm (2)
  • 60.0 mm (15)
  • 61.0 mm (25)
  • 64.0 mm (1)
  • 65.0 mm (6)
  • 66.0 mm (6)
  • 67.0 mm (10)
  • 70.0 mm (5)
  • 71.0 mm (23)
  • 72.9 mm (3)
  • 73.0 mm (4)
  • 74.0 mm (4)
  • 76.0 mm (5)
  • 77.0 mm (16)
  • 79.0 mm (3)
  • 82.0 mm (1)
  • 83.0 mm (12)
  • 87.875 mm (4)
  • 92.0 mm (13)
  • 93.0 mm (8)
  • 95.0 mm (1)
  • 101.0 mm (5)
  • 102.101 mm (4)
  • 110.0 mm (10)
  • 116.075 mm (2)
  • 128.0 mm (7)
  • 130.05 mm (1)
  • 146.0 mm (5)
  • 163.0 mm (4)
Reach Min 받는 사람 Reach Max
application
Coating
Coating
  • AlTiN (452)
backEnd
Back-End Diameter
Back-End Diameter
  • 4.775 mm (23)
  • 6.0 mm (118)
  • 6.351 mm (19)
  • 7.95 mm (18)
  • 8.0 mm (59)
  • 9.525 mm (17)
  • 10.0 mm (49)
  • 11.125 mm (14)
  • 12.0 mm (43)
  • 12.701 mm (11)
  • 14.0 mm (29)
  • 14.3 mm (8)
  • 15.875 mm (2)
  • 16.0 mm (23)
  • 17.45 mm (2)
  • 18.0 mm (16)
  • 19.05 mm (1)
  • 20.0 mm (8)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.188 in (23)
  • 0.237 in (118)
  • 0.25 in (19)
  • 0.313 in (18)
  • 0.315 in (59)
  • 0.375 in (17)
  • 0.394 in (49)
  • 0.438 in (14)
  • 0.473 in (43)
  • 0.5 in (11)
  • 0.551 in (29)
  • 0.564 in (8)
  • 0.625 in (2)
  • 0.63 in (23)
  • 0.687 in (2)
  • 0.709 in (16)
  • 0.75 in (1)
  • 0.787 in (8)
Back-End Diameter Min