Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

밀링

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7564)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6260)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6369)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6406)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6616)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7140)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6633)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6076)
  • M Stainless Steel (7032)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7032)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7030)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6313)
  • K Cast Iron (6331)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6330)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6325)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5622)
  • N Non-Ferrous Materials (2833)
    • N1
      Wrought Aluminum
      (2802)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2771)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2539)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (716)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (292)
    • N6
      Carbon, Graphite Composites, CFRP
      (96)
    • N7
      MMC's
      (78)
  • S High-Temp Alloys (5890)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5388)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5343)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5441)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5674)
  • H Hardened Materials (5123)
    • H1
      Hardened Materials 44-48 HRC
      (5092)
    • H2
      Hardened Materials 48-55 HRC
      (1676)
    • H3
      Hardened Materials 56-60 HRC
      (450)
    • H4
      Hardened Materials >60 HRC
      (191)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (199)
  • CN (898)
  • DE (1272)
  • GB (667)
  • IN (212)
  • SG (400)
  • US (1557)
Applications
Applications
  • Chamfer Milling Chamfer Milling (447)
  • Concave Radius Milling Concave Radius Milling (14)
  • Countersinking Countersinking (14)
  • Drilling Drilling (297)
  • Face Milling Face Milling (3605)
  • Flat Bottom Drilling Flat Bottom Drilling (14)
  • ID Thread Turning ID Thread Turning (104)
  • Pocket Pocket (4655)
  • Pocket Helical Pocket Helical (4647)
  • Pocket Milling Pocket Milling (4899)
  • Pocket Plunge Milling Pocket Plunge Milling (1601)
  • Profile Milling Profile Milling (1300)
  • Ramping Ramping (4640)
  • Shoulder Ball Nose Shoulder Ball Nose (1160)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (263)
  • Shoulder Milling Shoulder Milling (5386)
  • Shoulder Roughing Shoulder Roughing (2512)
  • Shoulder Square End Shoulder Square End (4291)
  • Slot Ball Nose Slot Ball Nose (504)
  • Slot Milling Slot Milling (4071)
  • Slot Side Slot Side (444)
  • Slot Square End Slot Square End (3196)
  • Slot T Slot T (30)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.0197 in (5)
  • 0.0236 in (5)
  • 0.0315 in (5)
  • 0.0394 in (11)
  • 0.0591 in (9)
  • 0.0625 in (9)
  • 0.0781 in (8)
  • 0.0787 in (38)
  • 0.0938 in (14)
  • 0.0984 in (23)
  • 0.1094 in (6)
  • 0.1181 in (50)
  • 0.125 in (53)
  • 0.1378 in (18)
  • 0.1562 in (8)
  • 0.1563 in (6)
  • 0.157 in (5)
  • 0.1575 in (83)
  • 0.1772 in (8)
  • 0.1875 in (68)
  • 0.1969 in (67)
  • 0.2165 in (6)
  • 0.2188 in (13)
  • 0.236 in (7)
  • 0.2362 in (137)
  • 0.25 in (170)
  • 0.2756 in (18)
  • 0.2812 in (5)
  • 0.2813 in (5)
  • 0.3125 in (82)
  • 0.315 in (161)
  • 0.3438 in (5)
  • 0.35 in (7)
  • 0.3543 in (11)
  • 0.375 in (266)
  • 0.3819 in (6)
  • 0.3937 in (248)
  • 0.394 in (10)
  • 0.4375 in (34)
  • 0.472 in (15)
  • 0.4724 in (266)
  • 0.5 in (428)
  • 0.551 in (5)
  • 0.5512 in (62)
  • 0.5625 in (17)
  • 0.5906 in (5)
  • 0.591 in (7)
  • 0.606 in (6)
  • 0.625 in (262)
  • 0.6299 in (232)
  • 0.63 in (65)
  • 0.7087 in (43)
  • 0.75 in (413)
  • 0.778 in (9)
  • 0.787 in (27)
  • 0.7874 in (267)
  • 0.875 in (15)
  • 0.984 in (41)
  • 0.9843 in (188)
  • 1.0 in (408)
  • 1.028 in (10)
  • 1.102 in (7)
  • 1.181 in (6)
  • 1.25 in (162)
  • 1.2598 in (55)
  • 1.26 in (49)
  • 1.496 in (6)
  • 1.5 in (70)
  • 1.528 in (8)
  • 1.5748 in (35)
  • 1.575 in (48)
  • 1.6535 in (6)
  • 1.968 in (7)
  • 1.9685 in (39)
  • 1.969 in (28)
  • 2.0 in (92)
  • 2.48 in (49)
  • 2.4803 in (36)
  • 2.5 in (65)
  • 3.0 in (104)
  • 3.1496 in (48)
  • 3.15 in (53)
  • 3.937 in (93)
  • 4.0 in (92)
  • 4.921 in (52)
  • 4.9213 in (47)
  • 5.0 in (74)
  • 6.0 in (63)
  • 6.299 in (41)
  • 6.2992 in (38)
  • 6.3 in (12)
  • 7.874 in (53)
  • 8.0 in (38)
  • 9.842 in (6)
  • 9.8425 in (8)
  • 9.843 in (19)
  • 10.0 in (28)
  • 12.0 in (18)
  • 12.401 in (7)
  • 12.402 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.5 mm (5)
  • 0.6 mm (5)
  • 0.794 mm (5)
  • 0.8 mm (5)
  • 1.0 mm (11)
  • 1.2 mm (4)
  • 1.5 mm (9)
  • 1.588 mm (9)
  • 1.8 mm (4)
  • 1.984 mm (8)
  • 2.0 mm (41)
  • 2.381 mm (12)
  • 2.5 mm (23)
  • 2.778 mm (6)
  • 3.0 mm (53)
  • 3.175 mm (51)
  • 3.5 mm (18)
  • 3.572 mm (4)
  • 3.969 mm (11)
  • 4.0 mm (88)
  • 4.5 mm (8)
  • 4.7625 mm (4)
  • 4.763 mm (63)
  • 5.0 mm (71)
  • 5.5 mm (6)
  • 5.556 mm (13)
  • 6.0 mm (144)
  • 6.35 mm (170)
  • 7.0 mm (18)
  • 7.144 mm (9)
  • 7.9375 mm (8)
  • 7.938 mm (76)
  • 8.0 mm (161)
  • 8.731 mm (5)
  • 8.8 mm (4)
  • 8.9 mm (4)
  • 9.0 mm (11)
  • 9.52 mm (4)
  • 9.525 mm (260)
  • 9.7 mm (6)
  • 10.0 mm (259)
  • 10.319 mm (4)
  • 11.113 mm (32)
  • 11.7 mm (5)
  • 12.0 mm (283)
  • 12.7 mm (427)
  • 13.0 mm (4)
  • 13.7 mm (4)
  • 14.0 mm (67)
  • 14.288 mm (17)
  • 15.0 mm (13)
  • 15.4 mm (4)
  • 15.7 mm (4)
  • 15.875 mm (257)
  • 16.0 mm (294)
  • 16.002 mm (4)
  • 16.04 mm (4)
  • 18.0 mm (44)
  • 19.05 mm (412)
  • 19.75 mm (5)
  • 20.0 mm (299)
  • 22.0 mm (10)
  • 22.225 mm (13)
  • 25.0 mm (229)
  • 25.4 mm (408)
  • 26.1 mm (7)
  • 28.0 mm (11)
  • 30.0 mm (9)
  • 31.75 mm (151)
  • 31.8 mm (10)
  • 32.0 mm (110)
  • 35.0 mm (5)
  • 38.0 mm (9)
  • 38.1 mm (69)
  • 40.0 mm (86)
  • 42.0 mm (7)
  • 47.0 mm (5)
  • 50.0 mm (76)
  • 50.8 mm (90)
  • 51.0 mm (8)
  • 54.0 mm (5)
  • 63.0 mm (84)
  • 63.5 mm (65)
  • 64.0 mm (5)
  • 68.0 mm (7)
  • 76.2 mm (104)
  • 80.0 mm (100)
  • 84.0 mm (5)
  • 100.0 mm (94)
  • 101.6 mm (90)
  • 125.0 mm (102)
  • 127.0 mm (73)
  • 152.4 mm (61)
  • 160.0 mm (87)
  • 200.0 mm (52)
  • 203.2 mm (35)
  • 250.0 mm (34)
  • 254.0 mm (27)
  • 304.8 mm (18)
  • 315.0 mm (19)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (3)
  • 12.7 mm (2)
  • 15.0 mm (6)
  • 15.875 mm (5)
  • 16.0 mm (6)
  • 19.05 mm (12)
  • 20.0 mm (19)
  • 24.0 mm (2)
  • 25.0 mm (30)
  • 25.2 mm (2)
  • 25.4 mm (25)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 31.55 mm (3)
  • 31.74 mm (3)
  • 31.75 mm (22)
  • 31.8 mm (3)
  • 32.0 mm (37)
  • 33.18 mm (5)
  • 33.58 mm (5)
  • 35.0 mm (13)
  • 37.9 mm (2)
  • 38.1 mm (34)
  • 38.15 mm (2)
  • 38.55 mm (2)
  • 39.923 mm (6)
  • 40.0 mm (26)
  • 40.173 mm (6)
  • 40.9 mm (2)
  • 41.1 mm (7)
  • 42.0 mm (7)
  • 44.46 mm (2)
  • 45.15 mm (2)
  • 45.974 mm (2)
  • 46.267 mm (2)
  • 46.36 mm (2)
  • 47.1 mm (2)
  • 48.0 mm (2)
  • 48.165 mm (2)
  • 48.95 mm (2)
  • 49.0 mm (6)
  • 50.0 mm (33)
  • 50.6 mm (2)
  • 50.64 mm (2)
  • 50.8 mm (31)
  • 51.0 mm (3)
  • 51.01 mm (2)
  • 51.44 mm (2)
  • 51.8 mm (4)
  • 52.0 mm (17)
  • 53.95 mm (3)
  • 56.35 mm (2)
  • 57.15 mm (2)
  • 58.0 mm (2)
  • 58.159 mm (3)
  • 58.9 mm (2)
  • 58.958 mm (3)
  • 63.0 mm (34)
  • 63.5 mm (20)
  • 63.88 mm (6)
  • 66.0 mm (19)
  • 71.154 mm (3)
  • 71.653 mm (3)
  • 74.0 mm (3)
  • 74.5 mm (3)
  • 76.2 mm (24)
  • 76.81 mm (6)
  • 80.0 mm (26)
  • 84.348 mm (3)
  • 87.2 mm (3)
  • 88.148 mm (3)
  • 88.646 mm (5)
  • 88.7 mm (4)
  • 91.0 mm (3)
  • 93.76 mm (6)
  • 100.0 mm (19)
  • 101.6 mm (19)
  • 108.145 mm (3)
  • 109.743 mm (3)
  • 110.236 mm (4)
  • 110.98 mm (3)
  • 112.7 mm (3)
  • 113.71 mm (4)
  • 125.0 mm (15)
  • 127.0 mm (11)
  • 133.145 mm (3)
  • 135.14 mm (3)
  • 135.636 mm (5)
  • 136.0 mm (3)
  • 138.67 mm (4)
  • 152.4 mm (9)
  • 160.0 mm (11)
  • 161.036 mm (5)
  • 170.97 mm (3)
  • 173.64 mm (3)
  • 200.0 mm (4)
  • 203.2 mm (3)
  • 211.836 mm (3)
  • 262.636 mm (4)
  • 313.436 mm (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.4724 in (3)
  • 0.5 in (2)
  • 0.5906 in (6)
  • 0.625 in (6)
  • 0.63 in (4)
  • 0.75 in (12)
  • 0.787 in (12)
  • 0.7874 in (8)
  • 0.984 in (20)
  • 0.9842 in (2)
  • 0.9843 in (7)
  • 1.0 in (27)
  • 1.1811 in (2)
  • 1.2421 in (3)
  • 1.25 in (28)
  • 1.259 in (3)
  • 1.2598 in (12)
  • 1.2599 in (3)
  • 1.26 in (19)
  • 1.306 in (5)
  • 1.322 in (5)
  • 1.377 in (2)
  • 1.378 in (10)
  • 1.5 in (35)
  • 1.502 in (2)
  • 1.518 in (2)
  • 1.572 in (6)
  • 1.5748 in (5)
  • 1.575 in (19)
  • 1.582 in (7)
  • 1.61 in (2)
  • 1.618 in (2)
  • 1.6181 in (4)
  • 1.6536 in (3)
  • 1.654 in (3)
  • 1.75 in (2)
  • 1.778 in (2)
  • 1.81 in (2)
  • 1.822 in (2)
  • 1.825 in (2)
  • 1.856 in (2)
  • 1.89 in (2)
  • 1.896 in (2)
  • 1.927 in (2)
  • 1.9291 in (6)
  • 1.9685 in (15)
  • 1.969 in (14)
  • 1.97 in (3)
  • 2.0 in (31)
  • 2.008 in (5)
  • 2.0394 in (4)
  • 2.047 in (8)
  • 2.0472 in (6)
  • 2.124 in (3)
  • 2.29 in (3)
  • 2.321 in (3)
  • 2.48 in (18)
  • 2.4803 in (14)
  • 2.5 in (22)
  • 2.515 in (6)
  • 2.598 in (9)
  • 2.5984 in (9)
  • 2.801 in (3)
  • 2.821 in (3)
  • 2.913 in (3)
  • 2.933 in (3)
  • 3.0 in (28)
  • 3.024 in (6)
  • 3.1496 in (9)
  • 3.15 in (16)
  • 3.321 in (3)
  • 3.433 in (3)
  • 3.47 in (3)
  • 3.49 in (5)
  • 3.4921 in (3)
  • 3.691 in (4)
  • 3.937 in (17)
  • 4.0 in (25)
  • 4.258 in (3)
  • 4.321 in (3)
  • 4.34 in (5)
  • 4.431 in (3)
  • 4.921 in (7)
  • 4.9213 in (7)
  • 5.0 in (15)
  • 5.242 in (3)
  • 5.32 in (3)
  • 5.34 in (7)
  • 5.4312 in (3)
  • 6.0 in (12)
  • 6.299 in (5)
  • 6.2992 in (6)
  • 6.34 in (5)
  • 6.4318 in (3)
  • 6.731 in (3)
  • 7.874 in (4)
  • 8.0 in (5)
  • 8.34 in (3)
  • 10.34 in (4)
  • 12.34 in (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.9 mm (23)
  • 1.0 mm (36)
  • 1.02 mm (12)
  • 1.09 mm (15)
  • 1.5 mm (104)
  • 1.6 mm (12)
  • 2.0 mm (16)
  • 2.21 mm (12)
  • 2.5 mm (76)
  • 3.0 mm (76)
  • 3.2 mm (15)
  • 3.23 mm (44)
  • 3.5 mm (101)
  • 3.96 mm (19)
  • 4.0 mm (65)
  • 4.3 mm (22)
  • 4.5 mm (34)
  • 4.51 mm (12)
  • 4.762 mm (11)
  • 5.0 mm (169)
  • 5.5 mm (61)
  • 5.89 mm (11)
  • 5.9 mm (18)
  • 5.99 mm (36)
  • 6.0 mm (171)
  • 6.35 mm (58)
  • 6.5 mm (20)
  • 6.57 mm (13)
  • 6.6 mm (21)
  • 6.61 mm (19)
  • 7.0 mm (31)
  • 7.938 mm (17)
  • 8.0 mm (171)
  • 9.0 mm (45)
  • 9.119 mm (15)
  • 9.16 mm (39)
  • 9.17 mm (14)
  • 9.5 mm (40)
  • 9.525 mm (74)
  • 9.87 mm (15)
  • 9.96 mm (16)
  • 10.0 mm (71)
  • 10.03 mm (18)
  • 11.0 mm (135)
  • 11.7 mm (12)
  • 12.0 mm (72)
  • 12.144 mm (12)
  • 12.7 mm (116)
  • 13.0 mm (79)
  • 14.0 mm (45)
  • 14.288 mm (47)
  • 14.6 mm (15)
  • 15.0 mm (86)
  • 15.5 mm (72)
  • 15.875 mm (140)
  • 16.0 mm (113)
  • 17.15 mm (13)
  • 17.4 mm (20)
  • 18.0 mm (135)
  • 19.0 mm (60)
  • 19.05 mm (194)
  • 20.0 mm (31)
  • 20.638 mm (12)
  • 20.65 mm (12)
  • 22.0 mm (99)
  • 22.225 mm (71)
  • 23.812 mm (20)
  • 23.813 mm (15)
  • 24.0 mm (107)
  • 25.0 mm (30)
  • 25.4 mm (212)
  • 25.45 mm (12)
  • 26.0 mm (124)
  • 28.0 mm (14)
  • 28.575 mm (84)
  • 30.0 mm (104)
  • 31.75 mm (204)
  • 32.0 mm (142)
  • 36.0 mm (33)
  • 37.5 mm (53)
  • 38.0 mm (96)
  • 38.1 mm (277)
  • 40.0 mm (19)
  • 41.275 mm (46)
  • 41.28 mm (12)
  • 44.45 mm (39)
  • 45.0 mm (76)
  • 47.625 mm (36)
  • 48.0 mm (32)
  • 50.0 mm (13)
  • 50.8 mm (90)
  • 57.15 mm (123)
  • 60.0 mm (28)
  • 63.5 mm (35)
  • 75.0 mm (30)
  • 76.2 mm (103)
  • 82.55 mm (15)
  • 88.9 mm (14)
  • 101.6 mm (52)
  • 127.0 mm (24)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0394 in (25)
  • 0.04 in (15)
  • 0.043 in (17)
  • 0.059 in (40)
  • 0.0591 in (54)
  • 0.0787 in (16)
  • 0.087 in (17)
  • 0.098 in (37)
  • 0.0984 in (41)
  • 0.117 in (16)
  • 0.118 in (24)
  • 0.1181 in (37)
  • 0.125 in (15)
  • 0.127 in (56)
  • 0.1378 in (64)
  • 0.138 in (39)
  • 0.156 in (18)
  • 0.1575 in (57)
  • 0.171 in (22)
  • 0.177 in (33)
  • 0.1875 in (23)
  • 0.1969 in (95)
  • 0.197 in (47)
  • 0.2 in (21)
  • 0.215 in (35)
  • 0.22 in (21)
  • 0.232 in (29)
  • 0.236 in (113)
  • 0.2362 in (86)
  • 0.249 in (21)
  • 0.25 in (64)
  • 0.256 in (17)
  • 0.259 in (18)
  • 0.26 in (25)
  • 0.2602 in (15)
  • 0.2756 in (25)
  • 0.3125 in (17)
  • 0.315 in (170)
  • 0.3543 in (39)
  • 0.359 in (25)
  • 0.361 in (53)
  • 0.374 in (39)
  • 0.375 in (88)
  • 0.3886 in (15)
  • 0.3937 in (66)
  • 0.395 in (16)
  • 0.433 in (73)
  • 0.4331 in (60)
  • 0.461 in (21)
  • 0.4724 in (72)
  • 0.4781 in (18)
  • 0.5 in (117)
  • 0.5118 in (72)
  • 0.551 in (14)
  • 0.5512 in (21)
  • 0.56 in (30)
  • 0.5625 in (48)
  • 0.57 in (23)
  • 0.5906 in (79)
  • 0.61 in (63)
  • 0.625 in (148)
  • 0.6299 in (92)
  • 0.63 in (24)
  • 0.69 in (26)
  • 0.7087 in (84)
  • 0.709 in (26)
  • 0.71 in (34)
  • 0.748 in (58)
  • 0.75 in (196)
  • 0.7874 in (29)
  • 0.8125 in (15)
  • 0.8661 in (98)
  • 0.875 in (76)
  • 0.9375 in (35)
  • 0.9449 in (104)
  • 0.9843 in (22)
  • 1.0 in (212)
  • 1.0236 in (118)
  • 1.125 in (84)
  • 1.1811 in (98)
  • 1.25 in (208)
  • 1.2598 in (134)
  • 1.4173 in (23)
  • 1.4764 in (53)
  • 1.4961 in (96)
  • 1.5 in (277)
  • 1.625 in (63)
  • 1.75 in (39)
  • 1.7717 in (76)
  • 1.875 in (36)
  • 1.8898 in (27)
  • 2.0 in (90)
  • 2.25 in (123)
  • 2.3622 in (19)
  • 2.5 in (35)
  • 2.9528 in (25)
  • 3.0 in (103)
  • 3.25 in (15)
  • 4.0 in (52)
  • 5.0 in (24)
Cutting Length Min