successfully added to cart
View Cart

Notifications

Mark all as read

Mill 1 -10

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (177)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (159)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (159)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (159)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (159)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (159)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (177)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (177)
  • M Stainless Steel (177)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (177)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (177)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (177)
  • K Cast Iron (133)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (133)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (133)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (133)
  • N Non-Ferrous Materials (94)
    • N1
      Wrought Aluminum
      (94)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (94)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (94)
  • S High-Temp Alloys (175)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (157)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (157)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (157)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (175)
  • H Hardened Materials (106)
    • H1
      Hardened Materials 44-48 HRC
      (106)
Select First Choice
  • BR (10)
  • CN (92)
  • DE (95)
  • GB (55)
  • IN (19)
  • SG (37)
  • US (86)
Applications
Applications
  • Face Milling Face Milling (84)
  • ID Thread Turning ID Thread Turning (1)
  • Pocket Pocket (84)
  • Pocket Helical Pocket Helical (84)
  • Pocket Milling Pocket Milling (84)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (84)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (3)
  • Shoulder Milling Shoulder Milling (84)
  • Shoulder Roughing Shoulder Roughing (3)
  • Shoulder Square End Shoulder Square End (84)
  • Slot Milling Slot Milling (66)
  • Slot Side Slot Side (3)
  • Slot Square End Slot Square End (66)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.75 in (4)
  • 0.787 in (2)
  • 0.7874 in (2)
  • 0.875 in (1)
  • 0.97 in (1)
  • 0.984 in (3)
  • 0.9843 in (5)
  • 1.0 in (8)
  • 1.25 in (8)
  • 1.2598 in (6)
  • 1.26 in (4)
  • 1.5 in (8)
  • 1.5748 in (4)
  • 1.575 in (6)
  • 1.969 in (2)
  • 2.0 in (3)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (3)
  • 3.15 in (2)
  • 3.937 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 6.299 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 22.225 mm (1)
  • 24.64 mm (1)
  • 25.0 mm (8)
  • 25.4 mm (8)
  • 31.75 mm (8)
  • 32.0 mm (10)
  • 38.1 mm (8)
  • 40.0 mm (10)
  • 50.0 mm (2)
  • 50.8 mm (3)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (3)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.6 mm (2)
  • 125.0 mm (2)
  • 160.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 14.0 mm (15)
  • 14.1 mm (6)
  • 14.2 mm (2)
  • 14.3 mm (11)
  • 14.4 mm (7)
  • 14.402 mm (2)
  • 14.478 mm (2)
  • 14.48 mm (4)
  • 14.5 mm (8)
  • 14.503 mm (1)
  • 14.6 mm (15)
  • 14.605 mm (1)
  • 14.7 mm (3)
  • 14.732 mm (6)
  • 15.503 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.55 in (2)
  • 0.551 in (1)
  • 0.555 in (1)
  • 0.56 in (30)
  • 0.5669 in (2)
  • 0.567 in (2)
  • 0.57 in (23)
  • 0.571 in (2)
  • 0.5748 in (8)
  • 0.575 in (1)
  • 0.5787 in (2)
  • 0.58 in (10)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.378 in (3)
  • 1.5 in (3)
  • 1.5354 in (1)
  • 1.536 in (1)
  • 1.575 in (17)
  • 1.625 in (1)
  • 1.73 in (1)
  • 1.732 in (2)
  • 1.7323 in (2)
  • 1.75 in (15)
  • 1.968 in (8)
  • 1.9685 in (2)
  • 1.969 in (11)
  • 2.0 in (2)
  • 2.23 in (2)
  • 2.25 in (10)
  • 2.48 in (3)
Reach Min to Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (2)
  • 38.11 mm (1)
  • 39.0 mm (2)
  • 40.0 mm (17)
  • 41.28 mm (1)
  • 43.95 mm (1)
  • 44.0 mm (4)
  • 44.45 mm (15)
  • 50.0 mm (21)
  • 50.8 mm (2)
  • 56.64 mm (1)
  • 56.65 mm (1)
  • 57.15 mm (10)
  • 63.0 mm (3)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (84)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (22)
  • B-Cutter Retention Screw (2)
  • CV-Caterpillar V-Flange In (3)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (7)
  • Straight-Cylindrical (25)
  • Weldon (24)
Number of Flutes
Number of Flutes
  • 1 (1)
  • 10 (2)
  • 11 (1)
  • 12 (1)
  • 2 (15)
  • 3 (20)
  • 4 (19)
  • 5 (13)
  • 6 (4)
  • 7 (3)
  • 8 (3)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (83)
  • 0.0156 in (91)
  • 0.016 in (87)
  • 0.031 in (86)
  • 0.0313 in (109)
  • 0.0469 in (98)
  • 0.047 in (86)
  • 0.062 in (86)
  • 0.0625 in (98)
  • 0.0783 in (86)
  • 0.094 in (88)
  • 0.122 in (97)
  • 0.157 in (89)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (83)
  • 0.4 mm (96)
  • 0.79 mm (86)
  • 0.794 mm (84)
  • 0.8 mm (107)
  • 1.19 mm (86)
  • 1.2 mm (98)
  • 1.59 mm (86)
  • 1.6 mm (98)
  • 2.0 mm (86)
  • 2.38 mm (88)
  • 3.1 mm (97)
  • 4.0 mm (89)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC410M (91)
  • KC422M (87)
  • KC520M (89)
  • KC522M (102)
  • KC725M (107)
  • KCK15 (86)
  • KCK20B (82)
  • KCPK30 (102)
  • KCPM20 (86)
  • KCPM40 (94)
  • KCSM30 (86)
  • KCSM40 (102)
Hand Of Tool
Hand Of Tool
  • R (84)
Wiper Insert
Wiper Insert
  • N (111)
  • Y (3)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.9 (1)
  • 1.2 (2)
  • 1.5 (4)
  • 1.9 (2)
  • 2.0 (3)
  • 2.5 (4)
  • 3.4 (3)
  • 3.5 (2)
  • 4.8 (10)
  • 5.2 (5)
  • 5.5 (3)
  • 6.8 (10)
  • 6.9 (4)
  • 7.2 (4)
  • 10.2 (5)
  • 10.4 (3)
  • 10.5 (7)
  • 10.7 (1)
  • 10.9 (1)
  • 13.2 (1)
  • 16.6 (4)
  • 18.0 (2)
  • 18.5 (2)
  • 25.0 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • E-PARALLELOGRAM 70 (182)
  • X-PARALLELOGRAM 70 (100)
Neck Diameter
Neck Diameter
  • 1.211 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 30.75 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • E-PARALLELOGRAM 70 (98)
  • X-PARALLELOGRAM 70 (16)
Cutting Edge Length
Cutting Edge Length
  • 14.857 mm (4)
  • 15.087 mm (4)
  • 15.262 mm (5)
  • 15.267 mm (5)
  • 15.273 mm (6)
  • 15.276 mm (7)
  • 15.278 mm (4)
  • 15.281 mm (9)
  • 15.283 mm (5)
  • 15.286 mm (10)
  • 15.289 mm (5)
  • 15.298 mm (3)
  • 17.437 mm (6)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5849 in (4)
  • 0.594 in (4)
  • 0.6009 in (5)
  • 0.6011 in (5)
  • 0.6013 in (6)
  • 0.6014 in (7)
  • 0.6015 in (4)
  • 0.6016 in (9)
  • 0.6017 in (5)
  • 0.6018 in (10)
  • 0.6019 in (5)
  • 0.6023 in (3)
  • 0.6865 in (6)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (27)
  • GD2 (4)
  • GE (20)
  • HD (45)
  • HD2 (3)
  • LD (15)
Cutting Tool Material
Cutting Tool Material
  • H W (114)
Tolerance Class
Tolerance Class
  • C (27)
  • P (87)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (49)
  • SCREW-ON (7)
  • SHELL MILL (25)
  • TAPER SHANK (3)
System Size
System Size
  • CV40 (3)
Back-End Diameter
Back-End Diameter
  • 12.7 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (6)
  • 19.1 mm (6)
  • 20.0 mm (3)
  • 21.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (8)
  • 25.4 mm (13)
  • 27.0 mm (2)
  • 29.0 mm (4)
  • 31.74 mm (1)
  • 31.75 mm (9)
  • 32.0 mm (14)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 44.45 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.75 in (12)
  • 0.787 in (1)
  • 0.7874 in (2)
  • 0.827 in (2)
  • 0.87 in (4)
  • 0.984 in (1)
  • 0.9843 in (7)
  • 1.0 in (13)
  • 1.06 in (2)
  • 1.142 in (4)
  • 1.25 in (10)
  • 1.2598 in (8)
  • 1.26 in (6)
  • 1.5 in (2)
  • 1.58 in (3)
  • 1.75 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Mill 1-14™

인덱서블 쉘밀
(13 Products)
  • 페이스 밀링페이스 밀링
  • 헬리컬 밀링헬리컬 밀링
  • 램핑: 블랭크램핑: 블랭크
  • 슬로팅: 스퀘어 엔드슬로팅: 스퀘어 엔드
  • 사이드 밀링/숄더 밀링: 스퀘어 엔드사이드 밀링/숄더 밀링: 스퀘어 엔드
  • 포켓팅포켓팅
  • 밀링 —  사이드 및 페이스밀링 — 사이드 및 페이스
  • 밀링 —  내부 쿨런트밀링 — 내부 쿨런트
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM
2623935 100A10RS90ED14D M1D100ME1410S032L050 100.0000 3.937 32.0 1.26 80.0000 3.150 50.0000 1.969 14.2000 .5600 10 1.500 1.81 16800  
    List price:
    $810.75 /each.
    Your price::
    Qty
    2510390 125B09RS90ED14D M1D125ME1409S040L063 125.0000 4.921 40.0 1.58 90.0000 3.543 63.0000 2.480 14.1000 .5600 9 1.200 2.64 14900  
      List price:
      $922.11 /each.
      Your price::
      Qty
      2623934 40A05RS90ED14D M1D040ME1405S016L040 40.0000 1.575 16.0 .63 37.0000 1.457 40.0000 1.575 14.3000 .5600 5 4.800 0.21 28700  
        List price:
        $505.28 /each.
        Your price::
        Qty
        2478686 50A06RS90ED14D M1D050ME1406S022L040   50.0000 1.969 22.0 .87 45.0000 1.772 40.0000 1.575 14.0000 .5600 6 3.500 0.29 25000
          List price:
          $554.30 /each.
          Your price::
          Qty
          2478689 63A07RS90ED14D M1D063ME1407S022L040 63.0000 2.480 22.0 .87 50.0000 1.969 40.0000 1.575 14.0000 .5500 7 2.500 0.48 21800  
            List price:
            $619.48 /each.
            Your price::
            Qty
            2478690 80A09RS90ED14D M1D080ME1409S027L050 80.0000 3.150 27.0 1.06 60.0000 2.362 50.0000 1.969 14.0000 .5600 9 1.900 1.00 19000  
              List price:
              $772.20 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Mill 1-14™

              Indexable End Mills
              (7 Products)
              • 페이스 밀링페이스 밀링
              • 헬리컬 밀링헬리컬 밀링
              • 램핑: 블랭크램핑: 블랭크
              • 슬로팅: 스퀘어 엔드슬로팅: 스퀘어 엔드
              • 사이드 밀링/숄더 밀링: 스퀘어 엔드사이드 밀링/숄더 밀링: 스퀘어 엔드
              • 포켓팅포켓팅
              • 섕크 —  원통형 웰던 2 플랫섕크 — 원통형 웰던 2 플랫
              • 밀링 —  내부 쿨런트밀링 — 내부 쿨런트
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Pounds Max RPM
              2624243 M1D062E1401W075L150 M1D062E1401W075L150 15.8750 .6250 19.05 .75 89.6700 3.530 38.1100 1.500 14.7320 .5800 1 25.000 0.31 8000  
                List price:
                $347.98 /each.
                Your price::
                Qty
                2623856 M1D075E1402W075L175 M1D075E1402W075L175 19.0500 .7500 19.05 .75 96.0120 3.780 44.4500 1.750 14.7320 .5800 2 18.000 0.35 49600  
                  List price:
                  $351.14 /each.
                  Your price::
                  Qty
                  2624189 M1D097E1403W100L175 M1D097E1403W100L175 24.6400 .9700 25.4 1.0 102.3600 4.030 44.4500 1.750 14.7320 .5800 3 10.900 0.69 40100  
                    List price:
                    $366.86 /each.
                    Your price::
                    Qty
                    2623857 M1D100E1402W100L175 M1D100E1402W100L175 25.4000 1.000 25.4 1.0 102.3620 4.030 44.4500 1.750 14.7320 .5800 2 10.400 0.71 39200  
                      List price:
                      $366.86 /each.
                      Your price::
                      Qty
                      2479508 M1D100E1403W100L175 M1D100E1403W100L175 25.4000 1.000 25.4 1.0 102.3600 4.030 44.4500 1.750 14.6000 .5800 3 10.200 0.71 39200  
                        List price:
                        $373.99 /each.
                        Your price::
                        Qty
                        2479506 M1D125E1404W125L225 M1D125E1404W125L225   31.7500 1.250 31.75 1.25 115.0620 4.530 57.1500 2.250 14.4780 .5700 4 7.200 1.25 33400
                          List price:
                          $398.25 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          • 페이스 밀링페이스 밀링
                          • 헬리컬 밀링헬리컬 밀링
                          • 램핑: 블랭크램핑: 블랭크
                          • 슬로팅: 스퀘어 엔드슬로팅: 스퀘어 엔드
                          • 사이드 밀링/숄더 밀링: 스퀘어 엔드사이드 밀링/숄더 밀링: 스퀘어 엔드
                          • 포켓팅포켓팅
                          • 섕크 —  원통형 웰던 2 플랫섕크 — 원통형 웰던 2 플랫
                          • 밀링 —  내부 쿨런트밀링 — 내부 쿨런트
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Pounds Max RPM
                          2479507 M1D100E1403W075L175 M1D100E1403W075L175   25.4000 1.000 19.05 .75 96.0120 3.780 44.4500 1.750 14.6050 .5750 3 10.400 0.46 39200
                            List price:
                            $373.99 /each.
                            Your price::
                            Qty
                            2624199 M1D100E1403W100L175R M1D100E1403W100L175R 25.4000 1.000 25.4 1.0 101.8600 4.010 43.9500 1.730 14.7320 .5800 3 10.400 0.70 39200  
                              List price:
                              $373.99 /each.
                              Your price::
                              Qty
                              2623858 M1D125E1403W100L225 M1D125E1403W100L225 31.7500 1.250 25.4 1.0 115.0620 4.530 57.1500 2.250 14.5030 .5710 3 7.200 0.94 33400  
                                List price:
                                $389.68 /each.
                                Your price::
                                Qty
                                2479512 M1D125E1404W100L225 M1D125E1404W100L225 31.7500 1.250 25.4 1.0 115.0620 4.530 57.1500 2.250 15.5030 .5710 4 7.200 0.97 33400  
                                  List price:
                                  $398.25 /each.
                                  Your price::
                                  Qty
                                  2624194 M1D150E1404W125L225 M1D150E1404W125L225 38.1000 1.500 31.75 1.25 115.0600 4.530 57.1500 2.250 14.4020 .5670 4 5.500 1.49 29600  
                                    List price:
                                    $468.19 /each.
                                    Your price::
                                    Qty
                                    2623859 M1D150E1405W125L225 M1D150E1405W125L225 38.1000 1.500 31.75 1.25 115.0620 4.530 57.1500 2.250 14.4020 .5670 5 5.500 1.53 29600  
                                      List price:
                                      $505.28 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      Mill 1-14™

                                      인덱서블 엔드밀
                                      (7 Products)
                                      • 페이스 밀링페이스 밀링
                                      • 헬리컬 밀링헬리컬 밀링
                                      • 램핑: 블랭크램핑: 블랭크
                                      • 슬로팅: 스퀘어 엔드슬로팅: 스퀘어 엔드
                                      • 사이드 밀링/숄더 밀링: 스퀘어 엔드사이드 밀링/숄더 밀링: 스퀘어 엔드
                                      • 포켓팅포켓팅
                                      • 섕크 —  스크류 온섕크 — 스크류 온
                                      • 밀링 —  내부 쿨런트밀링 — 내부 쿨런트
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM
                                      2968370 20A02R035M10SED14 M1D020ME1402M010L035   20.0000 .7870 18.0 .709 10.5000 .4130 M10 35.0000 1.378 14.9500 .5890 14.6000 .5700 2 16.600 0.05 47500
                                        List price:
                                        $351.14 /each.
                                        Your price::
                                        Qty
                                        2968371 25A02R035M12SED14 M1D025ME1402M012L035 25.0000 .9840 21.0 .827 12.5000 .4920 M12 35.0000 1.378 16.9500 .6670 14.5000 .5700 2 10.500 0.08 39700  
                                          List price:
                                          $359.74 /each.
                                          Your price::
                                          Qty
                                          3345679 25A03R035M12SED14 M1D025ME1403M012L035 25.0000 .9840 21.0 .827 12.5000 .4920 M12 35.0000 1.378 16.9500 .6670 14.5000 .5700 3 10.500 0.08 39700  
                                            List price:
                                            $402.64 /each.
                                            Your price::
                                            Qty
                                            2968372 32A03R040M16SED14 M1D032ME1403M016L040 32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 21.9000 .8620 14.4000 .5700 3 6.800 0.17 33300  
                                              List price:
                                              $389.68 /each.
                                              Your price::
                                              Qty
                                              3345680 32A04R040M16SED14 M1D032ME1404M016L040 32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 21.9000 .8620 14.4000 .5700 4 6.800 0.18 33300  
                                                List price:
                                                $465.98 /each.
                                                Your price::
                                                Qty
                                                2968373 40A04R040M16SED14 M1D040ME1404M016L040 40.0000 1.575 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 21.9000 .8620 14.3000 .5600 4 4.800 0.23 28700  
                                                  List price:
                                                  $468.19 /each.
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  Mill 1-14™

                                                  인덱서블 엔드밀
                                                  (16 Products)
                                                  • 페이스 밀링페이스 밀링
                                                  • 헬리컬 밀링헬리컬 밀링
                                                  • 램핑: 블랭크램핑: 블랭크
                                                  • 슬로팅: 스퀘어 엔드슬로팅: 스퀘어 엔드
                                                  • 사이드 밀링/숄더 밀링: 스퀘어 엔드사이드 밀링/숄더 밀링: 스퀘어 엔드
                                                  • 포켓팅포켓팅
                                                  • 섕크 —  원통형 일반섕크 — 원통형 일반
                                                  • 밀링 —  내부 쿨런트밀링 — 내부 쿨런트
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM
                                                  2968363 20A02R050A20SED14-170 M1D020ME1402C020L050-170   20.0000 .7874 20.0 .7874 170.0000 6.693 50.0000 1.969 14.7000 .5787 2 16.600 0.34 47500
                                                    List price:
                                                    $289.80 /each.
                                                    Your price::
                                                    Qty
                                                    2968367 25A02R050A25SED14-170 M1D025ME1402C025L050-170 25.0000 .9843 25.0 .9843 170.0000 6.693 50.0000 1.969 14.6000 .5748 2 10.500 0.56 39700  
                                                      List price:
                                                      $359.74 /each.
                                                      Your price::
                                                      Qty
                                                      2968364 25A03R050A25SED14-170 M1D025ME1403C025L050-170 25.0000 .9843 25.0 .9843 170.0000 6.693 50.0000 1.969 14.6000 .5748 3 10.500 0.56 39700  
                                                        List price:
                                                        $318.73 /each.
                                                        Your price::
                                                        Qty
                                                        2968368 32A03R050A32SED14-200 M1D032ME1403C032L050-200 32.0000 1.259 32.0 1.259 200.0000 7.874 50.0000 1.968 14.6000 .5748 3 6.800 1.10 33300  
                                                          List price:
                                                          $389.68 /each.
                                                          Your price::
                                                          Qty
                                                          2968365 32A04R050A32SED14-200 M1D032ME1404C032L050-200 32.0000 1.259 32.0 1.259 200.0000 7.874 50.0000 1.968 14.6000 .5748 4 6.800 1.11 33300  
                                                            List price:
                                                            $398.25 /each.
                                                            Your price::
                                                            Qty
                                                            2968366 40A05R050A32SED14-200 M1D040ME1405C032L050-200 40.0000 1.574 32.0