환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

솔리드 엔드 밀링

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (4646)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3840)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3840)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3876)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4050)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4491)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3886)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3312)
    • M Stainless Steel (4315)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4315)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4315)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3635)
    • K Cast Iron (3516)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3516)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3516)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2877)
    • N Non-Ferrous Materials (1579)
      • N1
        Wrought Aluminum (1552)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1552)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(1282)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1415)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1004)
      • N6
        Carbon, Graphite Composites, CFRP (813)
      • N7
        MMC's (799)
    • S High-Temp Alloys (3380)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3334)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3285)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3349)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3273)
    • H Hardened Materials (3923)
      • H1
        Hardened Materials 44-48 HRC(3911)
      • H2
        Hardened Materials 48-55 HRC(2432)
      • H3
        Hardened Materials 56-60 HRC(944)
      • H4
        Hardened Materials >60 HRC(880)
    • C CFRP Materials (27)
      • C1
        CFRP, CFRP / CFRP (27)
    1차 선택 선택
    • BR (91)
    • CN (365)
    • DE (594)
    • GB (277)
    • IN (75)
    • SG (187)
    • US (997)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Concave Radius MillingConcave Radius Milling (13)
    • DrillingDrilling (246)
    • Face MillingFace Milling (1501)
    • PocketPocket (4675)
    • Pocket HelicalPocket Helical (4755)
    • Pocket MillingPocket Milling (4840)
    • Pocket Plunge MillingPocket Plunge Milling (1672)
    • Profile MillingProfile Milling (595)
    • RampingRamping (4498)
    • Shoulder Ball NoseShoulder Ball Nose (807)
    • Shoulder MillingShoulder Milling (5169)
    • Shoulder RoughingShoulder Roughing (2772)
    • Shoulder Square EndShoulder Square End (4557)
    • Slot Ball NoseSlot Ball Nose (381)
    • Slot MillingSlot Milling (3301)
    • Slot Square EndSlot Square End (3036)
    • Trochoidal MillingTrochoidal Milling (1971)
    Cutting Diameter
    Cutting Diameter
    • 0.012 in(2)
    • 0.016 in(4)
    • 0.02 in(17)
    • 0.024 in(4)
    • 0.031 in(10)
    • 0.039 in(11)
    • 0.047 in(7)
    • 0.055 in(2)
    • 0.06 in(9)
    • 0.063 in(12)
    • 0.072 in(4)
    • 0.078 in(8)
    • 0.079 in(43)
    • 0.094 in(14)
    • 0.095 in(1)
    • 0.098 in(23)
    • 0.109 in(6)
    • 0.11 in(3)
    • 0.119 in(59)
    • 0.125 in(62)
    • 0.135 in(1)
    • 0.138 in(18)
    • 0.142 in(4)
    • 0.15 in(3)
    • 0.156 in(21)
    • 0.157 in(101)
    • 0.173 in(2)
    • 0.177 in(8)
    • 0.187 in(1)
    • 0.188 in(79)
    • 0.189 in(3)
    • 0.197 in(85)
    • 0.203 in(3)
    • 0.217 in(6)
    • 0.219 in(20)
    • 0.226 in(3)
    • 0.234 in(3)
    • 0.237 in(172)
    • 0.25 in(184)
    • 0.255 in(1)
    • 0.256 in(1)
    • 0.26 in(1)
    • 0.266 in(2)
    • 0.276 in(23)
    • 0.281 in(13)
    • 0.297 in(2)
    • 0.303 in(1)
    • 0.305 in(3)
    • 0.312 in(1)
    • 0.313 in(96)
    • 0.315 in(185)
    • 0.328 in(2)
    • 0.345 in(5)
    • 0.354 in(15)
    • 0.359 in(2)
    • 0.375 in(321)
    • 0.38 in(1)
    • 0.382 in(6)
    • 0.391 in(2)
    • 0.393 in(1)
    • 0.394 in(298)
    • 0.408 in(4)
    • 0.422 in(2)
    • 0.433 in(1)
    • 0.437 in(3)
    • 0.438 in(36)
    • 0.44 in(1)
    • 0.453 in(2)
    • 0.461 in(4)
    • 0.47 in(2)
    • 0.473 in(345)
    • 0.484 in(2)
    • 0.5 in(563)
    • 0.539 in(3)
    • 0.551 in(78)
    • 0.564 in(17)
    • 0.591 in(1)
    • 0.618 in(4)
    • 0.625 in(333)
    • 0.629 in(3)
    • 0.63 in(371)
    • 0.687 in(3)
    • 0.689 in(1)
    • 0.698 in(3)
    • 0.709 in(46)
    • 0.75 in(510)
    • 0.776 in(4)
    • 0.787 in(356)
    • 0.875 in(12)
    • 0.984 in(216)
    • 1.0 in(487)
    • 1.25 in(98)
    • 1.26 in(16)
    • 1.5 in(5)
    • 1.575 in(2)
    • 1.969 in(1)
    • 2.0 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.301 mm(2)
    • 0.4 mm(4)
    • 0.5 mm(17)
    • 0.601 mm(4)
    • 0.8 mm(10)
    • 1.0 mm(11)
    • 1.201 mm(7)
    • 1.401 mm(2)
    • 1.5 mm(9)
    • 1.6 mm(12)
    • 1.8 mm(4)
    • 1.975 mm(8)
    • 2.0 mm(43)
    • 2.375 mm(14)
    • 2.401 mm(1)
    • 2.5 mm(23)
    • 2.776 mm(6)
    • 2.801 mm(3)
    • 3.0 mm(59)
    • 3.176 mm(62)
    • 3.426 mm(1)
    • 3.5 mm(18)
    • 3.575 mm(4)
    • 3.801 mm(3)
    • 3.95 mm(2)
    • 3.975 mm(19)
    • 4.0 mm(101)
    • 4.375 mm(2)
    • 4.5 mm(8)
    • 4.75 mm(1)
    • 4.775 mm(79)
    • 4.801 mm(3)
    • 5.0 mm(85)
    • 5.15 mm(3)
    • 5.5 mm(6)
    • 5.551 mm(20)
    • 5.75 mm(3)
    • 5.95 mm(3)
    • 6.0 mm(172)
    • 6.351 mm(184)
    • 6.476 mm(1)
    • 6.5 mm(1)
    • 6.601 mm(1)
    • 6.75 mm(2)
    • 7.0 mm(23)
    • 7.15 mm(13)
    • 7.551 mm(2)
    • 7.7 mm(1)
    • 7.75 mm(3)
    • 7.926 mm(1)
    • 7.95 mm(96)
    • 8.0 mm(185)
    • 8.326 mm(2)
    • 8.725 mm(5)
    • 9.0 mm(15)
    • 9.125 mm(2)
    • 9.525 mm(321)
    • 9.65 mm(1)
    • 9.701 mm(6)
    • 9.925 mm(2)
    • 9.976 mm(1)
    • 10.0 mm(298)
    • 10.326 mm(4)
    • 10.726 mm(2)
    • 11.0 mm(1)
    • 11.101 mm(3)
    • 11.125 mm(36)
    • 11.175 mm(1)
    • 11.5 mm(2)
    • 11.701 mm(4)
    • 11.9 mm(2)
    • 12.0 mm(345)
    • 12.3 mm(2)
    • 12.701 mm(563)
    • 13.701 mm(3)
    • 14.0 mm(78)
    • 14.3 mm(17)
    • 15.0 mm(1)
    • 15.701 mm(4)
    • 15.875 mm(333)
    • 15.976 mm(3)
    • 16.0 mm(371)
    • 17.45 mm(3)
    • 17.475 mm(1)
    • 17.7 mm(3)
    • 18.0 mm(46)
    • 19.05 mm(510)
    • 19.701 mm(4)
    • 20.0 mm(356)
    • 22.225 mm(12)
    • 25.0 mm(216)
    • 25.401 mm(487)
    • 31.75 mm(98)
    • 32.0 mm(16)
    • 38.1 mm(5)
    • 40.0 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 7.45 mm(1)
    • 7.625 mm(1)
    • 7.95 mm(1)
    • 8.625 mm(1)
    • 9.025 mm(1)
    • 9.25 mm(1)
    • 9.525 mm(4)
    • 9.625 mm(1)
    • 10.0 mm(4)
    • 11.101 mm(1)
    • 11.451 mm(1)
    • 11.625 mm(1)
    • 12.0 mm(5)
    • 12.101 mm(1)
    • 12.701 mm(5)
    • 13.451 mm(1)
    • 14.625 mm(1)
    • 14.8 mm(1)
    • 14.826 mm(1)
    • 14.951 mm(1)
    • 15.101 mm(1)
    • 15.175 mm(1)
    • 15.25 mm(1)
    • 15.275 mm(1)
    • 15.351 mm(1)
    • 15.451 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(5)
    • 25.401 mm(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.293 in(1)
    • 0.3 in(1)
    • 0.313 in(1)
    • 0.34 in(1)
    • 0.355 in(1)
    • 0.364 in(1)
    • 0.375 in(4)
    • 0.379 in(1)
    • 0.394 in(4)
    • 0.437 in(1)
    • 0.451 in(1)
    • 0.458 in(1)
    • 0.473 in(5)
    • 0.477 in(1)
    • 0.5 in(5)
    • 0.53 in(1)
    • 0.577 in(1)
    • 0.583 in(1)
    • 0.584 in(1)
    • 0.589 in(1)
    • 0.595 in(1)
    • 0.597 in(1)
    • 0.6 in(1)
    • 0.601 in(1)
    • 0.604 in(1)
    • 0.608 in(1)
    • 0.625 in(2)
    • 0.63 in(5)
    • 1.0 in(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.2 mm(2)
    • 0.25 mm(1)
    • 0.275 mm(1)
    • 0.301 mm(2)
    • 0.325 mm(2)
    • 0.351 mm(1)
    • 0.4 mm(3)
    • 0.426 mm(3)
    • 0.5 mm(4)
    • 0.525 mm(4)
    • 0.55 mm(1)
    • 0.601 mm(2)
    • 0.625 mm(4)
    • 0.675 mm(4)
    • 0.701 mm(2)
    • 0.75 mm(1)
    • 0.8 mm(3)
    • 0.851 mm(6)
    • 0.9 mm(1)
    • 1.0 mm(5)
    • 1.026 mm(2)
    • 1.05 mm(3)
    • 1.201 mm(3)
    • 1.276 mm(1)
    • 1.5 mm(10)
    • 1.526 mm(2)
    • 1.6 mm(4)
    • 1.701 mm(1)
    • 1.8 mm(3)
    • 1.901 mm(2)
    • 1.975 mm(5)
    • 2.0 mm(17)
    • 2.1 mm(2)
    • 2.301 mm(2)
    • 2.401 mm(3)
    • 2.5 mm(3)
    • 2.551 mm(2)
    • 2.7 mm(2)
    • 2.776 mm(3)
    • 3.0 mm(21)
    • 3.051 mm(2)
    • 3.176 mm(7)
    • 3.2 mm(3)
    • 3.575 mm(2)
    • 3.7 mm(2)
    • 3.95 mm(1)
    • 3.975 mm(6)
    • 4.0 mm(41)
    • 4.5 mm(2)
    • 4.525 mm(1)
    • 4.75 mm(11)
    • 4.775 mm(6)
    • 5.0 mm(36)
    • 5.15 mm(3)
    • 5.551 mm(2)
    • 5.95 mm(1)
    • 6.0 mm(48)
    • 6.301 mm(6)
    • 6.351 mm(21)
    • 6.75 mm(3)
    • 7.0 mm(33)
    • 7.15 mm(5)
    • 7.5 mm(5)
    • 7.551 mm(4)
    • 7.926 mm(1)
    • 7.95 mm(21)
    • 8.0 mm(63)
    • 8.326 mm(4)
    • 9.0 mm(39)
    • 9.5 mm(4)
    • 9.525 mm(67)
    • 10.0 mm(53)
    • 10.726 mm(3)
    • 11.0 mm(50)
    • 11.101 mm(3)
    • 11.125 mm(11)
    • 11.9 mm(2)
    • 12.0 mm(72)
    • 12.3 mm(5)
    • 12.701 mm(103)
    • 13.0 mm(110)
    • 14.0 mm(20)
    • 14.3 mm(52)
    • 15.0 mm(88)
    • 15.875 mm(176)
    • 16.0 mm(76)
    • 17.0 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(97)
    • 18.55 mm(1)
    • 19.0 mm(80)
    • 19.05 mm(238)
    • 20.0 mm(33)
    • 20.625 mm(3)
    • 20.651 mm(12)
    • 21.0 mm(1)
    • 22.0 mm(128)
    • 22.225 mm(78)
    • 23.8 mm(18)
    • 23.826 mm(21)
    • 24.0 mm(115)
    • 25.0 mm(27)
    • 25.401 mm(276)
    • 26.0 mm(189)
    • 28.0 mm(7)
    • 28.576 mm(89)
    • 29.0 mm(2)
    • 30.0 mm(111)
    • 30.175 mm(6)
    • 30.451 mm(1)
    • 30.5 mm(1)
    • 31.0 mm(3)
    • 31.701 mm(4)
    • 31.75 mm(280)
    • 32.0 mm(213)
    • 33.0 mm(3)
    • 34.926 mm(4)
    • 35.0 mm(4)
    • 35.676 mm(1)
    • 36.0 mm(32)
    • 37.5 mm(52)
    • 38.0 mm(176)
    • 38.1 mm(312)
    • 39.0 mm(6)
    • 39.7 mm(7)
    • 40.0 mm(26)
    • 41.0 mm(2)
    • 41.276 mm(134)
    • 42.0 mm(7)
    • 44.45 mm(65)
    • 45.0 mm(108)
    • 45.801 mm(1)
    • 47.625 mm(61)
    • 47.7 mm(1)
    • 48.0 mm(52)
    • 50.0 mm(20)
    • 50.401 mm(1)
    • 50.801 mm(149)
    • 51.0 mm(1)
    • 52.0 mm(2)
    • 52.301 mm(1)
    • 53.975 mm(4)
    • 56.0 mm(8)
    • 57.0 mm(2)
    • 57.151 mm(157)
    • 60.0 mm(58)
    • 61.0 mm(1)
    • 63.5 mm(89)
    • 64.0 mm(15)
    • 66.675 mm(6)
    • 69.851 mm(6)
    • 70.0 mm(2)
    • 75.0 mm(39)
    • 76.2 mm(116)
    • 79.375 mm(19)
    • 80.0 mm(36)
    • 82.551 mm(50)
    • 88.9 mm(17)
    • 95.25 mm(19)
    • 100.0 mm(33)
    • 101.601 mm(75)
    • 104.775 mm(2)
    • 114.301 mm(16)
    • 125.0 mm(17)
    • 127.0 mm(38)
    • 139.701 mm(3)
    • 152.4 mm(15)
    • 165.101 mm(12)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.008 in(2)
    • 0.01 in(1)
    • 0.011 in(1)
    • 0.012 in(2)
    • 0.014 in(3)
    • 0.016 in(3)
    • 0.017 in(3)
    • 0.02 in(4)
    • 0.021 in(4)
    • 0.022 in(1)
    • 0.024 in(2)
    • 0.025 in(4)
    • 0.027 in(4)
    • 0.028 in(2)
    • 0.03 in(1)
    • 0.031 in(3)
    • 0.034 in(6)
    • 0.035 in(1)
    • 0.039 in(5)
    • 0.04 in(2)
    • 0.041 in(3)
    • 0.047 in(3)
    • 0.05 in(1)
    • 0.06 in(12)
    • 0.063 in(4)
    • 0.067 in(1)
    • 0.072 in(3)
    • 0.075 in(2)
    • 0.078 in(5)
    • 0.079 in(17)
    • 0.083 in(2)
    • 0.091 in(2)
    • 0.095 in(3)
    • 0.098 in(3)
    • 0.1 in(2)
    • 0.106 in(2)
    • 0.109 in(3)
    • 0.119 in(21)
    • 0.12 in(2)
    • 0.125 in(7)
    • 0.126 in(3)
    • 0.142 in(2)
    • 0.146 in(2)
    • 0.156 in(7)
    • 0.157 in(41)
    • 0.177 in(2)
    • 0.178 in(1)
    • 0.187 in(11)
    • 0.188 in(6)
    • 0.197 in(36)
    • 0.203 in(3)
    • 0.219 in(2)
    • 0.234 in(1)
    • 0.237 in(48)
    • 0.248 in(6)
    • 0.25 in(21)
    • 0.266 in(3)
    • 0.276 in(33)
    • 0.281 in(5)
    • 0.295 in(5)
    • 0.297 in(4)
    • 0.312 in(1)
    • 0.313 in(21)
    • 0.315 in(63)
    • 0.328 in(4)
    • 0.354 in(39)
    • 0.374 in(4)
    • 0.375 in(67)
    • 0.394 in(53)
    • 0.422 in(3)
    • 0.433 in(50)
    • 0.437 in(3)
    • 0.438 in(11)
    • 0.47 in(2)
    • 0.473 in(72)
    • 0.484 in(5)
    • 0.5 in(103)
    • 0.512 in(110)
    • 0.551 in(20)
    • 0.564 in(52)
    • 0.591 in(88)
    • 0.625 in(176)
    • 0.63 in(76)
    • 0.669 in(1)
    • 0.69 in(1)
    • 0.709 in(97)
    • 0.73 in(1)
    • 0.748 in(80)
    • 0.75 in(238)
    • 0.787 in(33)
    • 0.812 in(3)
    • 0.814 in(12)
    • 0.828 in(1)
    • 0.866 in(128)
    • 0.875 in(78)
    • 0.937 in(18)
    • 0.939 in(21)
    • 0.946 in(115)
    • 0.984 in(27)
    • 1.0 in(276)
    • 1.024 in(189)
    • 1.102 in(7)
    • 1.125 in(89)
    • 1.143 in(2)
    • 1.181 in(111)
    • 1.188 in(6)
    • 1.199 in(1)
    • 1.201 in(1)
    • 1.22 in(3)
    • 1.248 in(4)
    • 1.25 in(280)
    • 1.26 in(213)
    • 1.299 in(3)
    • 1.375 in(4)
    • 1.379 in(4)
    • 1.405 in(1)
    • 1.417 in(32)
    • 1.476 in(52)
    • 1.496 in(176)
    • 1.5 in(312)
    • 1.536 in(6)
    • 1.563 in(7)
    • 1.575 in(26)
    • 1.614 in(2)
    • 1.625 in(134)
    • 1.655 in(7)
    • 1.75 in(65)
    • 1.772 in(108)
    • 1.803 in(1)
    • 1.875 in(61)
    • 1.879 in(1)
    • 1.891 in(52)
    • 1.969 in(20)
    • 1.984 in(1)
    • 2.0 in(149)
    • 2.008 in(1)
    • 2.047 in(2)
    • 2.059 in(1)
    • 2.125 in(4)
    • 2.205 in(8)
    • 2.244 in(2)
    • 2.25 in(157)
    • 2.362 in(58)
    • 2.402 in(1)
    • 2.5 in(89)
    • 2.52 in(15)
    • 2.625 in(6)
    • 2.75 in(6)
    • 2.757 in(2)
    • 2.953 in(39)
    • 3.0 in(116)
    • 3.125 in(19)
    • 3.15 in(36)
    • 3.25 in(50)
    • 3.5 in(17)
    • 3.75 in(19)
    • 3.938 in(33)
    • 4.0 in(75)
    • 4.125 in(2)
    • 4.5 in(16)
    • 4.921 in(17)
    • 5.0 in(38)
    • 5.5 in(3)
    • 6.0 in(15)
    • 6.5 in(12)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.007 in(1)
    • 0.012 in(1)
    • 0.016 in(1)
    • 0.052 in(1)
    • 0.06 in(1)
    • 0.072 in(1)
    • 0.075 in(1)
    • 0.079 in(2)
    • 0.088 in(3)
    • 0.091 in(1)
    • 0.095 in(1)
    • 0.098 in(3)
    • 0.103 in(1)
    • 0.114 in(1)
    • 0.119 in(2)
    • 0.126 in(1)
    • 0.138 in(3)
    • 0.146 in(1)
    • 0.15 in(3)
    • 0.157 in(4)
    • 0.177 in(6)
    • 0.184 in(2)
    • 0.197 in(6)
    • 0.202 in(1)
    • 0.205 in(1)
    • 0.209 in(1)
    • 0.217 in(3)
    • 0.218 in(1)
    • 0.219 in(2)
    • 0.228 in(2)
    • 0.237 in(10)
    • 0.243 in(1)
    • 0.25 in(6)
    • 0.256 in(3)
    • 0.267 in(3)
    • 0.272 in(5)
    • 0.275 in(1)
    • 0.276 in(6)
    • 0.28 in(1)
    • 0.286 in(1)
    • 0.289 in(1)
    • 0.291 in(3)
    • 0.293 in(1)
    • 0.295 in(2)
    • 0.307 in(2)
    • 0.308 in(1)
    • 0.309 in(1)
    • 0.31 in(1)
    • 0.312 in(1)
    • 0.313 in(7)
    • 0.315 in(13)
    • 0.328 in(3)
    • 0.335 in(4)
    • 0.341 in(2)
    • 0.352 in(4)
    • 0.354 in(12)
    • 0.355 in(1)
    • 0.37 in(1)
    • 0.372 in(1)
    • 0.374 in(1)
    • 0.375 in(18)
    • 0.394 in(16)
    • 0.397 in(3)
    • 0.422 in(3)
    • 0.425 in(7)
    • 0.433 in(17)
    • 0.438 in(3)
    • 0.44 in(1)
    • 0.442 in(2)
    • 0.453 in(1)
    • 0.47 in(4)
    • 0.473 in(25)
    • 0.477 in(3)
    • 0.484 in(4)
    • 0.487 in(1)
    • 0.492 in(6)
    • 0.495 in(2)
    • 0.497 in(1)
    • 0.5 in(50)
    • 0.503 in(1)
    • 0.504 in(3)
    • 0.508 in(1)
    • 0.512 in(33)
    • 0.517 in(2)
    • 0.539 in(4)
    • 0.547 in(2)
    • 0.551 in(7)
    • 0.555 in(2)
    • 0.556 in(1)
    • 0.559 in(1)
    • 0.564 in(12)
    • 0.572 in(1)
    • 0.576 in(4)
    • 0.577 in(1)
    • 0.584 in(2)
    • 0.591 in(15)
    • 0.602 in(1)
    • 0.605 in(3)
    • 0.61 in(6)
    • 0.614 in(2)
    • 0.621 in(2)
    • 0.622 in(3)
    • 0.625 in(63)
    • 0.63 in(50)
    • 0.642 in(1)
    • 0.65 in(3)