환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
Read More

 

 

KOR Series Features:

하부 반경방향 맞물림 및 전체 절단 길이로 다이내믹 밀링에 적합한 설계

CAM 공구 경로 생성 소프트웨어를 사용하여 5축 장비의 성능 극대화 

 

 

KOR 5DA

특허 받은 플루트 형태가 진동을 줄이고 공구 수명을 개선합니다.

  • 알루미늄용 다이내믹 황삭기
  • 칩 분배기를 사용하여 거의 완벽한 칩 관리 가능
  • Safe-Lock™ 섕크를 사용하여 빠짐 방지
  • 내부 쿨런트 사용 여부 선택 가능

 

KOR 5DA

  • 내부 쿨런트가 절삭 영역에서 칩을 제거하고 발열 감소 지원
  • 5개의 절삭날로 이송률 증가 및 높은 소재 제거율 제공
  • 칩브레이커가 칩 제거를 효율적으로 관리
  • 특허 받은 플루트 형태로 쿨런트 유량, 칩 배출, 3 x D 최대 절삭 깊이 보장
  • 알루미늄 애플리케이션에서 최대 66% 테이블 이송 향상
  • Safe-Lock™ 섕크로 엔드밀 빠짐 방지

 

 

KOR 5DS

대상 재료에 맞춰 조정되는 헬릭스 각도로 진동을 최소화하고 공구 수명 최적화

  • 강철 및 스테인리스강을 위한 다이내믹 황삭기
  • 칩 디포머를 사용하여 높은 표면조도에서 거의 완벽한 칩 관리 가능
  • Safe-Lock™ 및 Weldon® 섕크로 빠짐 방지
  • 일반형 및 Weldon 섕크에서 3 x D 및 5 x D 지원

 

 

KOR 6DT

프론트 엔드 형상으로 헬리컬 및 램핑 작업에서 최대 공구 수명 제공

  • 티타늄을 위한 다이내믹 황삭기
  • 칩 분배기를 사용하여 칩 관리 최적화
  • 일반형 및 Weldon 섕크에서 3 x D 및 5 x D 지원

KOR™ 제품 검색

 

필터 선택
필터
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (92)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (92)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (92)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (92)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (92)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (92)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (92)
  • M Stainless Steel (92)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (92)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (92)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (92)
  • K Cast Iron (92)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (92)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (92)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (92)
  • N Non-Ferrous Materials (120)
    • N1
      Wrought Aluminum (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (120)
  • S High-Temp Alloys (92)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (92)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (92)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (92)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (92)
  • H Hardened Materials (92)
    • H1
      Hardened Materials 44-48 HRC (92)
    • H2
      Hardened Materials 48-55 HRC (92)
Applications
Applications
  • Pocket Pocket (40)
  • Pocket Helical Pocket Helical (212)
  • Pocket Milling Pocket Milling (212)
  • Ramping Ramping (80)
  • Shoulder Milling Shoulder Milling (212)
  • Shoulder Roughing Shoulder Roughing (99)
  • Shoulder Square End Shoulder Square End (212)
  • Trochoidal Milling Trochoidal Milling (191)
Cutting Diameter
Cutting Diameter
  • 0.25 in (4)
  • 0.315 in (8)
  • 0.375 in (20)
  • 0.394 in (20)
  • 0.473 in (23)
  • 0.5 in (20)
  • 0.625 in (20)
  • 0.63 in (20)
  • 0.75 in (23)
  • 0.787 in (17)
  • 0.984 in (17)
  • 1.0 in (20)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.351 mm (4)
  • 8.0 mm (8)
  • 9.525 mm (20)
  • 10.0 mm (20)
  • 12.0 mm (23)
  • 12.701 mm (20)
  • 15.875 mm (20)
  • 16.0 mm (20)
  • 19.05 mm (23)
  • 20.0 mm (17)
  • 25.0 mm (17)
  • 25.401 mm (20)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Length
Cutting Length
  • 19.05 mm (2)
  • 24.0 mm (4)
  • 28.576 mm (12)
  • 30.0 mm (12)
  • 31.75 mm (2)
  • 36.0 mm (14)
  • 38.1 mm (12)
  • 40.0 mm (4)
  • 47.625 mm (20)
  • 48.0 mm (12)
  • 50.0 mm (8)
  • 57.151 mm (14)
  • 60.0 mm (19)
  • 63.5 mm (8)
  • 75.0 mm (10)
  • 76.2 mm (12)
  • 79.375 mm (8)
  • 80.0 mm (8)
  • 95.25 mm (9)
  • 100.0 mm (7)
  • 125.0 mm (7)
  • 127.0 mm (8)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 0.75 in (2)
  • 0.946 in (4)
  • 1.125 in (12)
  • 1.181 in (12)
  • 1.25 in (2)
  • 1.417 in (14)
  • 1.5 in (12)
  • 1.575 in (4)
  • 1.875 in (20)
  • 1.891 in (12)
  • 1.969 in (8)
  • 2.25 in (14)
  • 2.362 in (19)
  • 2.5 in (8)
  • 2.953 in (10)
  • 3.0 in (12)
  • 3.125 in (8)
  • 3.15 in (8)
  • 3.75 in (9)
  • 3.938 in (7)
  • 4.921 in (7)
  • 5.0 in (8)
Cutting Length Min 받는 사람 Cutting Length Max
Reach
Reach
  • 1.407 in (3)
  • 1.457 in (4)
  • 1.728 in (4)
  • 1.824 in (3)
  • 2.255 in (2)
  • 2.273 in (4)
  • 2.815 in (3)
  • 2.953 in (3)
  • 3.494 in (3)
  • 3.548 in (3)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 35.7 mm (3)
  • 37.0 mm (4)
  • 43.901 mm (4)
  • 46.325 mm (3)
  • 57.276 mm (2)
  • 57.7 mm (4)
  • 71.5 mm (3)
  • 75.0 mm (3)
  • 88.75 mm (3)
  • 90.125 mm (3)
Reach Min 받는 사람 Reach Max
Connection Style
Connection Style
  • SAFE-LOCK (112)
  • Straight-Cylindrical (54)
  • Weldon (46)
Number of Flutes
Number of Flutes
  • 5 (168)
  • 6 (44)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.5 in (2)
  • 2.638 in (4)
  • 2.953 in (8)
  • 3.0 in (14)
  • 3.15 in (4)
  • 3.426 in (14)
  • 3.5 in (12)
  • 3.938 in (12)
  • 4.0 in (20)
  • 4.094 in (8)
  • 4.331 in (4)
  • 4.5 in (4)
  • 4.529 in (5)
  • 4.724 in (6)
  • 4.921 in (8)
  • 5.0 in (18)
  • 5.5 in (12)
  • 5.551 in (8)
  • 5.67 in (6)
  • 5.906 in (4)
  • 6.0 in (8)
  • 6.25 in (5)
  • 6.535 in (5)
  • 6.694 in (2)
  • 7.0 in (4)
  • 7.48 in (2)
  • 7.5 in (4)
  • 7.875 in (5)
  • 8.0 in (4)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (2)
  • 67.0 mm (4)
  • 75.0 mm (8)
  • 76.2 mm (14)
  • 80.0 mm (4)
  • 87.0 mm (14)
  • 88.9 mm (12)
  • 100.0 mm (12)
  • 101.601 mm (20)
  • 104.0 mm (8)
  • 110.0 mm (4)
  • 114.301 mm (4)
  • 115.0 mm (5)
  • 120.0 mm (6)
  • 125.0 mm (8)
  • 127.0 mm (18)
  • 139.701 mm (12)
  • 141.0 mm (8)
  • 144.0 mm (6)
  • 150.0 mm (4)
  • 152.4 mm (8)
  • 158.75 mm (5)
  • 166.0 mm (5)
  • 170.0 mm (2)
  • 177.8 mm (4)
  • 190.0 mm (2)
  • 190.5 mm (4)
  • 200.0 mm (5)
  • 203.201 mm (4)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • RADIUS (182)
  • SQUARE END (30)
Corner Radius
Corner Radius
  • 0.0 in (30)
  • 0.008 in (6)
  • 0.015 in (6)
  • 0.02 in (31)
  • 0.03 in (51)
  • 0.039 in (27)
  • 0.06 in (34)
  • 0.079 in (3)
  • 0.09 in (9)
  • 0.098 in (12)
  • 0.12 in (3)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (30)
  • 0.2 mm (6)
  • 0.375 mm (6)
  • 0.5 mm (31)
  • 0.75 mm (51)
  • 1.0 mm (27)
  • 1.5 mm (3)
  • 1.526 mm (31)
  • 2.0 mm (3)
  • 2.275 mm (9)
  • 2.5 mm (12)
  • 3.051 mm (3)
Corner Radius Min 받는 사람 Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K600 (120)
  • KC643M (48)
  • KCSM15 (44)
Rough Finish
Rough Finish
  • FBS (200)
  • F (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 4.0 (38)
  • 5.0 (12)
Maximum Ramp Angle Min 받는 사람 Maximum Ramp Angle Max
frontEnd
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 6.351 mm (4)
  • 8.0 mm (8)
  • 9.525 mm (20)
  • 10.0 mm (20)
  • 12.0 mm (23)
  • 12.701 mm (20)
  • 15.875 mm (20)
  • 16.0 mm (20)
  • 19.05 mm (23)
  • 20.0 mm (17)
  • 25.0 mm (17)
  • 25.401 mm (20)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.25 in (4)
  • 0.315 in (8)
  • 0.375 in (20)
  • 0.394 in (20)
  • 0.473 in (23)
  • 0.5 in (20)
  • 0.625 in (20)
  • 0.63 in (20)
  • 0.75 in (23)
  • 0.787 in (17)
  • 0.984 in (17)
  • 1.0 in (20)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
No filters matching ""

KOR5™ DA • Square End • 5 Flutes • 3 x D • Plain Shank • Inch

(1) KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Plain Shank • Inch

KOR5™ DA • Square End • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

(4) KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

KOR5™ DA • Square End • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

(1) KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

(3) KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

(13) KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

KOR5™ DA • Square End • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

(4) KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

KOR5™ DA • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch

(3) KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch

KOR5™ DA • Radiused • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

(13) KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

KOR5™ DS • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch

(6) KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch

KOR5™ DS • Radiused • 5 Flutes • 3 x D • Weldon® Shank • Inch

(6) KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 3 x D • Weldon® Shank • Inch

KOR5™ DS • Radiused • 5 Flutes • 5 x D • Plain Shank • Inch

(6) KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 5 x D • Plain Shank • Inch

KOR5™ DS • Radiused • 5 Flutes • 5 x D • Weldon® Shank • Inch

(6) KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 5 x D • Weldon® Shank • Inch

KOR6™ DT • Radiused • 6 Flutes • 3 x D • Plain Shank • Inch

(1) KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Plain Shank • Inch

KOR6™ DT • Radiused • 6 Flutes • 3 x D • Safe-Lock™ Shank • Inch

(4) KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Safe-Lock™ Shank • Inch

KOR6™ DT • Radiused • 6 Flutes • 3 x D • Weldon® Shank • Inch

(5) KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Weldon® Shank • Inch

KOR6™ DT • Radiused • 6 Flutes • 5 x D • Plain Shank • Inch

(1) KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 5 x D • Plain Shank • Inch
Scroll Top
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.
장바구니 보기

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

등록해 주셔서 감사합니다. 지금 로그인하여 사이트를 이용하실 수 있습니다.

You are about to leave the Solution building process.

Are you sure you want to leave?