환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

제품 관련 질문이 있으십니까?

전문 분야별 글로벌 서비스 전문가 전체 목록 보기

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

PCD 공구의 길어진 공수 수명으로 초경 솔루션과 비교하여 최대 10배 높은 생산성을 제공합니다.

 

고속 알루미늄 가공을 위한 PCD 공구로 가공 시간 대폭 단축

다양한 스타일의 PCD 엔드 밀, PCD 드릴 및 PCD 리머가 여러 애플리케이션을 지원하는 것은 물론, 사이클 타임을 대폭 단축하고 생산성을 증가시키는 알루미늄 가공 전략을 지원합니다.

황삭 및 정삭 작업에 적합하며, 모든 공구에서 MQL(최소 수량 윤활)을 이용할 수 있습니다.

날카로운 절삭 인선 및 낮은 마찰의 경사면이 고품질 표면 조도를 보장합니다.

 

PCD 툴링 특징

  • 날카로운 절삭 인선
  • 낮은 마찰의 경사면으로 구성 인선 감소
  • 탁월한 내마모성, 긴 공구 수명
  • 표준 PCD 공구를 통해 리드 타임 단축
  • MQL 사용 가능

드릴/리머

엔드밀

필터 선택
Filters
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • N Non-Ferrous Materials (138)
    • N1
      Wrought Aluminum (138)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (138)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (138)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
    • N6
      Carbon, Graphite Composites, CFRP (44)
    • N7
      MMC's (44)
Applications
Applications
  • Blind Hole Finishing Blind Hole Finishing (37)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (49)
  • Drilling Drilling (67)
  • Face Milling Face Milling (44)
  • Pocket Pocket (18)
  • Pocket Helical Pocket Helical (18)
  • Pocket Milling Pocket Milling (18)
  • Pocket Plunge Milling Pocket Plunge Milling (18)
  • Ramping Ramping (18)
  • Shoulder Milling Shoulder Milling (44)
  • Shoulder Roughing Shoulder Roughing (44)
  • Shoulder Square End Shoulder Square End (44)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (44)
  • Through Hole Finishing Through Hole Finishing (32)
  • Trochoidal Milling Trochoidal Milling (44)
Cutting Diameter
Cutting Diameter
  • 0.234 in (1)
  • 0.237 in (5)
  • 0.25 in (5)
  • 0.256 in (1)
  • 0.276 in (1)
  • 0.281 in (1)
  • 0.295 in (1)
  • 0.313 in (5)
  • 0.315 in (5)
  • 0.328 in (1)
  • 0.335 in (1)
  • 0.345 in (1)
  • 0.354 in (1)
  • 0.374 in (1)
  • 0.375 in (5)
  • 0.391 in (1)
  • 0.394 in (5)
  • 0.408 in (1)
  • 0.414 in (1)
  • 0.422 in (1)
  • 0.433 in (1)
  • 0.438 in (3)
  • 0.453 in (2)
  • 0.473 in (6)
  • 0.484 in (1)
  • 0.492 in (1)
  • 0.5 in (6)
  • 0.512 in (1)
  • 0.531 in (2)
  • 0.551 in (3)
  • 0.564 in (1)
  • 0.572 in (1)
  • 0.578 in (1)
  • 0.591 in (1)
  • 0.61 in (1)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.672 in (1)
  • 0.69 in (1)
  • 0.709 in (3)
  • 0.728 in (1)
  • 0.748 in (1)
  • 0.75 in (6)
  • 0.768 in (1)
  • 0.787 in (6)
  • 0.866 in (1)
  • 0.876 in (1)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.102 in (1)
  • 1.125 in (1)
  • 1.181 in (1)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.417 in (1)
  • 1.438 in (1)
  • 1.5 in (2)
  • 1.563 in (1)
  • 1.575 in (3)
  • 1.653 in (1)
  • 1.655 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.95 mm (1)
  • 6.0 mm (5)
  • 6.351 mm (5)
  • 6.5 mm (1)
  • 7.0 mm (1)
  • 7.15 mm (1)
  • 7.5 mm (1)
  • 7.95 mm (5)
  • 8.0 mm (5)
  • 8.326 mm (1)
  • 8.5 mm (1)
  • 8.725 mm (1)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (5)
  • 9.925 mm (1)
  • 10.0 mm (5)
  • 10.326 mm (1)
  • 10.5 mm (1)
  • 10.726 mm (1)
  • 11.0 mm (1)
  • 11.125 mm (3)
  • 11.5 mm (2)
  • 12.0 mm (6)
  • 12.3 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (6)
  • 13.0 mm (1)
  • 13.5 mm (2)
  • 14.0 mm (3)
  • 14.3 mm (1)
  • 14.5 mm (1)
  • 14.675 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.075 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (3)
  • 18.5 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (6)
  • 19.5 mm (1)
  • 20.0 mm (6)
  • 22.0 mm (1)
  • 22.25 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 28.0 mm (1)
  • 28.576 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 36.0 mm (1)
  • 36.525 mm (1)
  • 38.1 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (3)
  • 41.95 mm (1)
  • 42.0 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (1)
  • 6.351 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 15.0 mm (6)
  • 15.875 mm (7)
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (3)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 50.801 mm (1)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.313 in (1)
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.591 in (6)
  • 0.625 in (7)
  • 0.63 in (1)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.0 in (3)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (3)
  • 2.0 in (1)
Cutting Length Min 받는 사람 Cutting Length Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 34.9 mm (2)
  • 35.0 mm (1)
  • 40.301 mm (2)
  • 43.0 mm (4)
  • 48.7 mm (3)
  • 49.0 mm (4)
  • 53.1 mm (4)
  • 55.6 mm (3)
  • 56.0 mm (4)
  • 60.0 mm (6)
  • 63.0 mm (4)
  • 64.5 mm (2)
  • 71.0 mm (4)
  • 73.0 mm (1)
  • 74.5 mm (1)
  • 77.0 mm (4)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.374 in (2)
  • 1.379 in (1)
  • 1.587 in (2)
  • 1.693 in (4)
  • 1.917 in (3)
  • 1.929 in (4)
  • 2.091 in (4)
  • 2.189 in (3)
  • 2.205 in (4)
  • 2.362 in (6)
  • 2.48 in (4)
  • 2.539 in (2)
  • 2.795 in (4)
  • 2.874 in (1)
  • 2.934 in (1)
  • 3.031 in (4)
Maximum Hole Depth [L4] Min 받는 사람 Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.748 in (4)
  • 0.906 in (2)
  • 0.984 in (2)
  • 1.339 in (4)
  • 1.379 in (3)
  • 1.417 in (3)
  • 1.496 in (3)
  • 1.614 in (3)
  • 1.655 in (1)
  • 1.693 in (4)
  • 1.713 in (2)
  • 1.732 in (2)
  • 1.772 in (6)
  • 1.988 in (1)
  • 2.0 in (1)
  • 2.087 in (4)
  • 2.165 in (4)
  • 2.205 in (3)
  • 2.244 in (1)
  • 2.382 in (3)
  • 2.402 in (4)
  • 2.48 in (1)
  • 2.618 in (4)
  • 2.677 in (1)
  • 2.777 in (3)
  • 2.795 in (1)
  • 2.874 in (1)
  • 3.012 in (2)
  • 3.031 in (3)
  • 3.189 in (1)
  • 3.248 in (2)
  • 3.269 in (4)
  • 3.642 in (1)
  • 3.661 in (4)
  • 3.761 in (1)
  • 3.976 in (4)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 19.0 mm (4)
  • 23.0 mm (2)
  • 25.0 mm (2)
  • 34.0 mm (4)
  • 35.0 mm (3)
  • 36.0 mm (3)
  • 38.0 mm (3)
  • 41.0 mm (3)
  • 42.0 mm (1)
  • 43.0 mm (4)
  • 43.5 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (6)
  • 50.5 mm (1)
  • 50.801 mm (1)
  • 53.0 mm (4)
  • 55.0 mm (4)
  • 56.0 mm (3)
  • 57.0 mm (1)
  • 60.5 mm (3)
  • 61.0 mm (4)
  • 63.0 mm (1)
  • 66.5 mm (4)
  • 68.0 mm (1)
  • 70.5 mm (3)
  • 71.0 mm (1)
  • 73.0 mm (1)
  • 76.5 mm (2)
  • 77.0 mm (3)
  • 81.0 mm (1)
  • 82.5 mm (2)
  • 83.0 mm (4)
  • 92.5 mm (1)
  • 93.0 mm (4)
  • 95.5 mm (1)
  • 101.0 mm (4)
Reach Min 받는 사람 Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (44)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (17)
  • Straight-Cylindrical (121)
Number of Flutes
Number of Flutes
  • 2 (87)
  • 3 (2)
  • 4 (36)
  • 5 (2)
  • 6 (11)
Over All Length [L]
Over All Length [L]
  • 2.244 in (2)
  • 2.25 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 2.992 in (2)
  • 3.0 in (2)
  • 3.248 in (3)
  • 3.25 in (3)
  • 3.269 in (3)
  • 3.602 in (6)
  • 3.74 in (3)
  • 3.75 in (3)
  • 3.938 in (4)
  • 4.0 in (4)
  • 4.075 in (7)
  • 4.25 in (4)
  • 4.252 in (3)
  • 4.39 in (4)
  • 4.529 in (1)
  • 4.665 in (7)
  • 4.902 in (6)
  • 4.921 in (2)
  • 5.0 in (1)