환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

정밀 내부 선삭

소형 및 마이크로 부품을 만드는 데 필요한 높은 정확도와 정밀도에 관해 TopSwiss MBS는 한 차원 높은 내부 선삭을 위해 신뢰할 수 있는 다목적 제품을 제공합니다. 의료, 항공우주, 자동차 및 일반 엔지니어링 공장에 이상적입니다. 

TopSwiss MBS 기능:

  • 세 가지 수준의 정밀도에 걸쳐 거의 200개의 공구 홀더: 표준, 프리미엄 및 고성능
  • 동급 최고의 공구 수명 및 표면 마감을 위한 매우 날카로운 절삭날
  • 고온 합금, 경화 재료, 스테인리스강, 강철 및 복합 재료를 위한 5가지 고성능 재료별 코팅
  • 여러 재료에 걸쳐 일관성을 위해 설계된 범용 코팅
필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (844)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(844)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(844)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(844)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(844)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(844)
    • M Stainless Steel (844)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(844)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(844)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(844)
    • K Cast Iron (844)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(844)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(844)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(844)
    • N Non-Ferrous Materials (844)
      • N1
        Wrought Aluminum (844)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(844)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(844)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (844)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (844)
      • N6
        Carbon, Graphite Composites, CFRP (844)
    • S High-Temp Alloys (844)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(844)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(844)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(844)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(844)
    • H Hardened Materials (844)
      • H1
        Hardened Materials 44-48 HRC(844)
      • H2
        Hardened Materials 48-55 HRC(844)
      • H3
        Hardened Materials 56-60 HRC(844)
      • H4
        Hardened Materials >60 HRC(844)
    Applications
    Applications
    • Back BoringBack Boring (19)
    • Face GroovingFace Grooving (176)
    • FacingFacing (49)
    • ID FacingID Facing (437)
    • ID GroovingID Grooving (212)
    • ID Thread TurningID Thread Turning (128)
    • TRN BoringTRN Boring (453)
    • ThreadingThreading (128)
    • TurningTurning (49)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 0.0 (128)
    • 45.0 (16)
    • 90.0 (433)
    • 93.0 (19)
    • 96.0 (92)
    • 98.0 (284)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (923)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.543 in(16)
    • 5.118 in(16)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 90.0 mm(16)
    • 130.0 mm(16)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(48)
    • 0.001 in(42)
    • 0.002 in(119)
    • 0.004 in(282)
    • 0.006 in(114)
    • 0.008 in(151)
    • 0.016 in(14)
    • 0.02 in(18)
    • 0.03 in(6)
    • 0.031 in(12)
    • 0.039 in(18)
    • 0.049 in(10)
    • 0.06 in(10)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(48)
    • 0.025 mm(42)
    • 0.05 mm(119)
    • 0.1 mm(282)
    • 0.151 mm(114)
    • 0.2 mm(151)
    • 0.4 mm(14)
    • 0.5 mm(18)
    • 0.75 mm(6)
    • 0.775 mm(2)
    • 0.8 mm(10)
    • 1.0 mm(18)
    • 1.25 mm(10)
    • 1.5 mm(10)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • L (461)
    • R (462)
    F Dimension
    F Dimension
    • 0.025 mm(1)
    • 0.1 mm(4)
    • 0.151 mm(1)
    • 0.2 mm(18)
    • 0.301 mm(2)
    • 0.351 mm(4)
    • 0.4 mm(4)
    • 0.45 mm(2)
    • 0.601 mm(42)
    • 0.675 mm(2)
    • 0.701 mm(19)
    • 0.8 mm(4)
    • 0.9 mm(15)
    • 1.0 mm(8)
    • 1.1 mm(14)
    • 1.25 mm(4)
    • 1.5 mm(105)
    • 1.6 mm(18)
    • 1.8 mm(16)
    • 1.901 mm(142)
    • 2.0 mm(12)
    • 2.1 mm(18)
    • 2.2 mm(70)
    • 2.301 mm(150)
    • 2.401 mm(48)
    • 2.5 mm(30)
    • 2.7 mm(4)
    • 2.801 mm(85)
    • 3.0 mm(14)
    • 3.301 mm(16)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.001 in(1)
    • 0.004 in(4)
    • 0.006 in(1)
    • 0.008 in(18)
    • 0.012 in(2)
    • 0.014 in(4)
    • 0.016 in(4)
    • 0.019 in(2)
    • 0.024 in(42)
    • 0.027 in(2)
    • 0.028 in(19)
    • 0.031 in(4)
    • 0.035 in(15)
    • 0.039 in(8)
    • 0.044 in(14)
    • 0.049 in(4)
    • 0.06 in(105)
    • 0.063 in(18)
    • 0.072 in(16)
    • 0.075 in(142)
    • 0.079 in(12)
    • 0.083 in(18)
    • 0.088 in(70)
    • 0.091 in(150)
    • 0.095 in(48)
    • 0.098 in(30)
    • 0.106 in(4)
    • 0.11 in(85)
    • 0.119 in(14)
    • 0.13 in(16)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.301 mm(2)
    • 0.4 mm(2)
    • 0.5 mm(4)
    • 0.601 mm(4)
    • 0.701 mm(2)
    • 0.8 mm(4)
    • 1.0 mm(16)
    • 1.201 mm(2)
    • 1.5 mm(20)
    • 1.701 mm(2)
    • 2.0 mm(37)
    • 2.1 mm(3)
    • 2.401 mm(6)
    • 2.5 mm(10)
    • 2.801 mm(24)
    • 2.901 mm(8)
    • 3.0 mm(26)
    • 3.2 mm(10)
    • 3.5 mm(14)
    • 3.7 mm(5)
    • 4.0 mm(112)
    • 4.7 mm(8)
    • 4.801 mm(2)
    • 5.0 mm(174)
    • 5.7 mm(10)
    • 6.0 mm(240)
    • 6.7 mm(8)
    • 6.801 mm(78)
    • 7.0 mm(25)
    • 7.7 mm(8)
    • 7.801 mm(16)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.012 in(2)
    • 0.016 in(2)
    • 0.02 in(4)
    • 0.024 in(4)
    • 0.028 in(2)
    • 0.031 in(4)
    • 0.039 in(16)
    • 0.047 in(2)
    • 0.06 in(20)
    • 0.067 in(2)
    • 0.079 in(37)
    • 0.083 in(3)
    • 0.095 in(6)
    • 0.098 in(10)
    • 0.11 in(24)
    • 0.114 in(8)
    • 0.119 in(26)
    • 0.126 in(10)
    • 0.138 in(14)
    • 0.146 in(5)
    • 0.157 in(112)
    • 0.185 in(8)
    • 0.189 in(2)
    • 0.197 in(174)
    • 0.224 in(10)
    • 0.237 in(240)
    • 0.264 in(8)
    • 0.268 in(78)
    • 0.276 in(25)
    • 0.303 in(8)
    • 0.307 in(16)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (176)
    • S (286)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.047 in(2)
    • 0.063 in(2)
    • 0.072 in(4)
    • 0.079 in(3)
    • 0.11 in(1)
    • 0.119 in(2)
    • 0.15 in(2)
    • 0.157 in(6)
    • 0.177 in(11)
    • 0.197 in(22)
    • 0.237 in(2)
    • 0.256 in(2)
    • 0.276 in(6)
    • 0.295 in(2)
    • 0.315 in(4)
    • 0.354 in(31)
    • 0.394 in(88)
    • 0.433 in(58)
    • 0.473 in(4)
    • 0.512 in(4)
    • 0.531 in(4)
    • 0.551 in(20)
    • 0.591 in(155)
    • 0.63 in(36)
    • 0.728 in(7)
    • 0.748 in(48)
    • 0.768 in(2)
    • 0.787 in(104)
    • 0.828 in(8)
    • 0.866 in(40)
    • 0.906 in(6)
    • 0.925 in(2)
    • 0.946 in(34)
    • 0.984 in(58)
    • 1.063 in(4)
    • 1.102 in(2)
    • 1.122 in(6)
    • 1.143 in(22)
    • 1.181 in(74)
    • 1.339 in(10)
    • 1.379 in(22)
    • 1.536 in(4)
    • 1.575 in(20)
    • 1.614 in(4)
    • 1.655 in(6)
    • 1.732 in(2)
    • 1.772 in(4)
    • 1.929 in(4)
    • 1.969 in(6)
    • 2.323 in(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.201 mm(2)
    • 1.6 mm(2)
    • 1.8 mm(4)
    • 2.0 mm(3)
    • 2.801 mm(1)
    • 3.0 mm(2)
    • 3.801 mm(2)
    • 4.0 mm(6)
    • 4.5 mm(11)
    • 5.0 mm(22)
    • 6.0 mm(2)
    • 6.5 mm(2)
    • 7.0 mm(6)
    • 7.5 mm(2)
    • 8.0 mm(4)
    • 9.0 mm(31)
    • 10.0 mm(88)
    • 11.0 mm(58)
    • 12.0 mm(4)
    • 13.0 mm(4)
    • 13.5 mm(4)
    • 14.0 mm(20)
    • 15.0 mm(155)
    • 16.0 mm(36)
    • 18.5 mm(7)
    • 19.0 mm(48)
    • 19.5 mm(2)
    • 20.0 mm(104)
    • 21.0 mm(8)
    • 22.0 mm(40)
    • 23.0 mm(6)
    • 23.5 mm(2)
    • 24.0 mm(34)
    • 25.0 mm(58)
    • 27.0 mm(4)
    • 28.0 mm(2)
    • 28.5 mm(6)
    • 29.0 mm(22)
    • 30.0 mm(74)
    • 34.0 mm(10)
    • 35.0 mm(22)
    • 39.0 mm(4)
    • 40.0 mm(20)
    • 41.0 mm(4)
    • 42.0 mm(6)
    • 44.0 mm(2)
    • 45.0 mm(4)
    • 49.0 mm(4)
    • 50.0 mm(6)
    • 59.0 mm(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (747)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.012 in(4)
    • 0.016 in(6)
    • 0.02 in(14)
    • 0.028 in(6)
    • 0.031 in(6)
    • 0.039 in(94)
    • 0.047 in(8)
    • 0.06 in(56)
    • 0.063 in(18)
    • 0.075 in(6)
    • 0.079 in(82)
    • 0.095 in(2)
    • 0.098 in(30)
    • 0.119 in(34)
    • 0.157 in(12)
    • 0.197 in(10)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.301 mm(4)
    • 0.4 mm(6)
    • 0.5 mm(14)
    • 0.701 mm(6)
    • 0.8 mm(6)
    • 1.0 mm(94)
    • 1.201 mm(8)
    • 1.5 mm(56)
    • 1.6 mm(18)
    • 1.901 mm(6)
    • 2.0 mm(82)
    • 2.401 mm(2)
    • 2.5 mm(30)
    • 3.0 mm(34)
    • 4.0 mm(12)
    • 5.0 mm(10)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Shape
    Insert Shape
    • KS_BB (15)
    • KS_BP_GA (135)
    • KS_BP_GB (20)
    • KS_BP_GC (21)
    • KS_BP_HM (57)
    • KS_BP_HP (80)
    • KS_BP_ML (37)
    • KS_MF_DB (49)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.008 in(4)
    • 0.016 in(13)
    • 0.02 in(6)
    • 0.024 in(7)
    • 0.028 in(12)
    • 0.031 in(30)
    • 0.039 in(54)
    • 0.072 in(46)
    • 0.079 in(28)
    • 0.098 in(49)
    • 0.119 in(42)
    • 0.157 in(28)
    • 0.197 in(27)
    • 0.237 in(19)
    • 0.394 in(8)
    • 0.591 in(2)
    • 0.787 in(8)
    • 0.984 in(6)
    • 1.181 in(6)
    • 1.379 in(6)
    • 1.575 in(6)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.2 mm(4)
    • 0.4 mm(13)
    • 0.5 mm(6)
    • 0.601 mm(7)
    • 0.701 mm(12)
    • 0.8 mm(30)
    • 1.0 mm(54)
    • 1.8 mm(46)
    • 2.0 mm(28)
    • 2.5 mm(49)
    • 3.0 mm(42)
    • 4.0 mm(28)
    • 5.0 mm(27)
    • 6.0 mm(19)
    • 10.0 mm(8)
    • 15.0 mm(2)
    • 20.0 mm(8)
    • 25.0 mm(6)
    • 30.0 mm(6)
    • 35.0 mm(6)
    • 40.0 mm(6)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 1.307 in(1)
    • 1.504 in(1)
    • 2.953 in(11)
    • 3.248 in(16)
    • 3.543 in(14)
    • 3.74 in(10)
    • 4.823 in(16)
    Gage Length
    Gage Length
    • 90 mm(14)
    • 75 mm(11)
    • 95 mm(10)
    • 33.2 mm(1)
    • 38.2 mm(1)
    • 82.5 mm(16)
    • 122.5 mm(16)
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 0.197 in(16)
    • 0.237 in(70)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Groove Diameter Min받는 사람Minimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 5.0 mm(16)
    • 6.0 mm(70)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Groove Diameter Min받는 사람Minimum Groove Diameter Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (923)
    System Size
    System Size
    • PSC32 (1)
    • PSC40 (1)
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(313)
    • 5.0 mm(184)
    • 6.0 mm(250)
    • 7.0 mm(159)
    • 8.0 mm(66)
    • 12.0 mm(11)
    • 12.701 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(20)
    • 19.05 mm(19)
    • 20.0 mm(22)
    • 22.0 mm(20)
    • 25.0 mm(21)
    • 25.401 mm(20)
    • 32.0 mm(1)
    • 40.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(313)
    • 0.197 in(184)
    • 0.237 in(250)
    • 0.276 in(159)
    • 0.315 in(66)
    • 0.473 in(11)
    • 0.5 in(1)
    • 0.625 in(2)
    • 0.63 in(20)
    • 0.75 in(19)
    • 0.787 in(22)
    • 0.866 in(20)
    • 0.984 in(21)
    • 1.0 in(20)
    • 1.26 in(1)
    • 1.575 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Inserts • Micro Boring Solid
    (972)

    Inserts • Micro Boring Solid

    Holders
    (165)

    Holders

    Sleeves
    (5)

    Sleeves

    문의 사항이 있으십니까?

    당사의 숙련된 직원들이 귀하를 도와드릴 준비가 되어 있습니다.

    추가 정보 요청
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk