Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

스레드 밀링

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (389)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (389)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (389)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (389)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (370)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (389)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (354)
  • M Stainless Steel (389)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (389)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (389)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (354)
  • K Cast Iron (396)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (396)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (389)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (389)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum
      (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (42)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (42)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (42)
    • N6
      Carbon, Graphite Composites, CFRP
      (35)
  • S High-Temp Alloys (268)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (268)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (268)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (268)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (268)
  • H Hardened Materials (254)
    • H1
      Hardened Materials 44-48 HRC
      (254)
Applications
Applications
  • Countersinking Countersinking (23)
  • Drilling Drilling (7)
  • ID Thread Turning ID Thread Turning (209)
  • OD Thread Turning OD Thread Turning (58)
  • Pipe Thread Pipe Thread (45)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (33)
  • Shoulder Roughing Shoulder Roughing (33)
  • Shoulder Square End Shoulder Square End (33)
  • Thread Milling Thread Milling (181)
  • Threading Threading (181)
Cutting Diameter
Cutting Diameter
  • 0.0945 in (1)
  • 0.124 in (1)
  • 0.1244 in (1)
  • 0.1575 in (1)
  • 0.1591 in (1)
  • 0.185 in (1)
  • 0.189 in (3)
  • 0.2323 in (1)
  • 0.2362 in (2)
  • 0.2421 in (1)
  • 0.2559 in (2)
  • 0.2638 in (1)
  • 0.3012 in (1)
  • 0.315 in (2)
  • 0.3228 in (2)
  • 0.354 in (2)
  • 0.3543 in (3)
  • 0.3898 in (3)
  • 0.39 in (1)
  • 0.3937 in (4)
  • 0.4075 in (1)
  • 0.4094 in (1)
  • 0.45 in (3)
  • 0.4528 in (2)
  • 0.453 in (1)
  • 0.4567 in (2)
  • 0.4646 in (1)
  • 0.4724 in (2)
  • 0.4764 in (1)
  • 0.5157 in (1)
  • 0.53 in (1)
  • 0.535 in (1)
  • 0.5354 in (2)
  • 0.5512 in (3)
  • 0.58 in (2)
  • 0.581 in (1)
  • 0.59 in (1)
  • 0.5906 in (1)
  • 0.594 in (1)
  • 0.608 in (1)
  • 0.6083 in (1)
  • 0.61 in (1)
  • 0.6102 in (2)
  • 0.63 in (4)
  • 0.6692 in (1)
  • 0.6693 in (2)
  • 0.67 in (4)
  • 0.677 in (1)
  • 0.68 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.7874 in (3)
  • 0.79 in (1)
  • 0.7992 in (1)
  • 0.802 in (1)
  • 0.8071 in (2)
  • 0.81 in (4)
  • 0.835 in (2)
  • 0.866 in (2)
  • 0.8661 in (3)
  • 0.87 in (5)
  • 0.906 in (1)
  • 0.91 in (2)
  • 0.965 in (1)
  • 0.97 in (1)
  • 0.9843 in (1)
  • 1.02 in (2)
  • 1.0236 in (1)
  • 1.024 in (2)
  • 1.039 in (1)
  • 1.0394 in (1)
  • 1.18 in (8)
  • 1.181 in (4)
  • 1.1811 in (4)
  • 1.22 in (4)
  • 1.3583 in (1)
  • 1.378 in (1)
  • 1.417 in (3)
  • 1.4173 in (1)
  • 1.42 in (2)
  • 1.437 in (1)
  • 1.44 in (2)
  • 1.4567 in (2)
  • 1.46 in (1)
  • 1.478 in (1)
  • 1.54 in (1)
  • 1.65 in (1)
  • 1.6535 in (2)
  • 1.654 in (2)
  • 1.66 in (2)
  • 1.69 in (1)
  • 1.732 in (2)
  • 1.811 in (1)
  • 1.8898 in (1)
  • 1.89 in (1)
  • 1.93 in (2)
  • 2.047 in (2)
  • 2.09 in (2)
  • 2.2047 in (1)
  • 2.32 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.4 mm (1)
  • 3.15 mm (1)
  • 3.16 mm (1)
  • 4.0 mm (1)
  • 4.04 mm (1)
  • 4.7 mm (1)
  • 4.8 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 6.15 mm (1)
  • 6.5 mm (2)
  • 6.7 mm (1)
  • 7.65 mm (1)
  • 8.0 mm (2)
  • 8.2 mm (2)
  • 8.992 mm (2)
  • 9.0 mm (3)
  • 9.9 mm (3)
  • 10.0 mm (4)
  • 10.135 mm (1)
  • 10.35 mm (1)
  • 10.4 mm (1)
  • 11.4 mm (1)
  • 11.43 mm (2)
  • 11.5 mm (3)
  • 11.6 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (2)
  • 12.1 mm (1)
  • 13.1 mm (1)
  • 13.5 mm (1)
  • 13.6 mm (3)
  • 14.0 mm (3)
  • 14.7 mm (1)
  • 14.732 mm (1)
  • 14.75 mm (1)
  • 15.0 mm (2)
  • 15.1 mm (1)
  • 15.45 mm (2)
  • 15.494 mm (1)
  • 15.5 mm (2)
  • 16.0 mm (4)
  • 17.0 mm (5)
  • 17.018 mm (2)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 20.066 mm (1)
  • 20.3 mm (1)
  • 20.37 mm (1)
  • 20.5 mm (2)
  • 20.6 mm (4)
  • 21.2 mm (2)
  • 22.0 mm (5)
  • 22.098 mm (1)
  • 22.1 mm (4)
  • 23.0 mm (1)
  • 23.1 mm (2)
  • 23.3 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.9 mm (2)
  • 26.0 mm (3)
  • 26.01 mm (1)
  • 26.39 mm (1)
  • 26.4 mm (1)
  • 29.972 mm (3)
  • 30.0 mm (13)
  • 31.0 mm (4)
  • 34.5 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (4)
  • 36.1 mm (2)
  • 36.5 mm (1)
  • 36.6 mm (2)
  • 37.0 mm (2)
  • 37.084 mm (1)
  • 37.541 mm (1)
  • 39.1 mm (1)
  • 41.91 mm (1)
  • 42.0 mm (3)
  • 42.012 mm (1)
  • 42.926 mm (1)
  • 44.0 mm (2)
  • 46.0 mm (1)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 52.0 mm (2)
  • 53.086 mm (1)
  • 53.1 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 58.9 mm (2)
  • 63.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 17.02 mm (1)
  • 22.0 mm (1)
  • 22.1 mm (1)
  • 27.94 mm (1)
  • 28.0 mm (1)
  • 36.1 mm (1)
  • 39.065 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.55 in (1)
  • 0.6693 in (1)
  • 0.67 in (1)
  • 0.8661 in (1)
  • 0.87 in (1)
  • 1.1 in (1)
  • 1.1024 in (1)
  • 1.4213 in (1)
  • 1.538 in (1)
  • 1.772 in (1)
  • 1.93 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.24 mm (1)
  • 8.73 mm (1)
  • 10.4 mm (2)
  • 10.41 mm (2)
  • 10.78 mm (1)
  • 10.92 mm (3)
  • 10.922 mm (1)
  • 11.0 mm (3)
  • 12.36 mm (1)
  • 16.0 mm (11)
  • 16.002 mm (2)
  • 16.44 mm (1)
  • 16.83 mm (2)
  • 20.24 mm (1)
  • 20.46 mm (1)
  • 24.47 mm (1)
  • 24.71 mm (1)
  • 25.34 mm (1)
  • 26.92 mm (4)
  • 26.924 mm (1)
  • 27.0 mm (6)
  • 28.0 mm (1)
  • 29.16 mm (1)
  • 32.16 mm (1)
  • 32.93 mm (1)
  • 36.69 mm (1)
  • 38.5 mm (2)
  • 41.15 mm (1)
  • 41.16 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.2457 in (1)
  • 0.3437 in (1)
  • 0.4094 in (2)
  • 0.41 in (2)
  • 0.4244 in (1)
  • 0.43 in (4)
  • 0.433 in (3)
  • 0.4866 in (1)
  • 0.6299 in (1)
  • 0.63 in (12)
  • 0.6472 in (1)
  • 0.6626 in (2)
  • 0.7969 in (1)
  • 0.8055 in (1)
  • 0.9634 in (1)
  • 0.9728 in (1)
  • 0.9976 in (1)
  • 1.06 in (5)
  • 1.063 in (6)
  • 1.1024 in (1)
  • 1.148 in (1)
  • 1.2661 in (1)
  • 1.2965 in (1)
  • 1.4445 in (1)
  • 1.5157 in (2)
  • 1.6201 in (1)
  • 1.6205 in (1)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • BSPT (18)
  • BSW (99)
  • M (182)
  • MF (12)
  • NC/UNC (7)
  • NPS (15)
  • NPT (46)
  • NPTF (32)
  • UN (156)
Thread Size
Thread Size
  • 1/2-13 (1)
  • 1/4-20 (1)
  • 3/8-16 (1)
  • 5/16-18 (1)
  • 5/8-11 (1)
  • 7/16-14 (1)
  • 9/16-12 (1)
  • M10 X 1.0 (1)
  • M10 X 1.5 (1)
  • M10X1.5 (2)
  • M12 X 1.0 (1)
  • M12 X 1.5 (1)
  • M12 X 1.75 (1)
  • M12X1.25 (1)
  • M12X1.75 (2)
  • M14 X 1.5 (1)
  • M14 X 2.0 (1)
  • M14X1.5 (1)
  • M14X2 (1)
  • M16 X 1.5 (1)
  • M16 X 2.0 (1)
  • M16X2 (2)
  • M18 X 1.5 (1)
  • M20 X 1.5 (1)
  • M20 X 2.5 (1)
  • M3 X 0.5 (1)
  • M4 X 0.7 (1)
  • M4X0.7 (1)
  • M5 X 0.8 (1)
  • M5X0.8 (1)
  • M6 X 1 (1)
  • M6X1 (2)
  • M8 X 0.75 (1)
  • M8 X 1.0 (1)
  • M8 X 1.25 (1)
  • M8X1 (1)
  • M8X1.25 (2)
Reach
Reach
  • 0.3776 in (1)
  • 0.4654 in (1)
  • 0.47 in (1)
  • 0.472 in (2)
  • 0.4724 in (1)
  • 0.5193 in (1)
  • 0.5783 in (1)
  • 0.61 in (1)
  • 0.6102 in (1)
  • 0.6472 in (1)
  • 0.6626 in (1)
  • 0.669 in (1)
  • 0.6693 in (1)
  • 0.6783 in (1)
  • 0.6972 in (1)
  • 0.7252 in (1)
  • 0.787 in (1)
  • 0.79 in (1)
  • 0.7969 in (1)
  • 0.8055 in (1)
  • 0.807 in (1)
  • 0.8354 in (1)
  • 0.866 in (1)
  • 0.8661 in (1)
  • 0.87 in (2)
  • 0.9055 in (1)
  • 0.91 in (1)
  • 0.9311 in (1)
  • 0.9634 in (1)
  • 0.9728 in (1)
  • 0.9843 in (1)
  • 0.9937 in (1)
  • 0.9976 in (1)
  • 1.0 in (1)
  • 1.02 in (2)
  • 1.0236 in (2)
  • 1.024 in (2)
  • 1.0425 in (1)
  • 1.0878 in (1)
  • 1.1 in (3)
  • 1.102 in (1)
  • 1.148 in (1)
  • 1.18 in (1)
  • 1.181 in (1)
  • 1.1906 in (1)
  • 1.1909 in (1)
  • 1.26 in (2)
  • 1.2661 in (1)
  • 1.2965 in (1)
  • 1.319 in (2)
  • 1.34 in (1)
  • 1.348 in (1)
  • 1.38 in (1)
  • 1.417 in (1)
  • 1.4173 in (1)
  • 1.42 in (1)
  • 1.4445 in (1)
  • 1.45 in (1)
  • 1.4567 in (1)
  • 1.496 in (1)
  • 1.4961 in (1)
  • 1.5 in (1)
  • 1.5669 in (1)
  • 1.5748 in (2)
  • 1.575 in (2)
  • 1.58 in (3)
  • 1.6201 in (1)
  • 1.6205 in (1)
  • 1.68 in (1)
  • 1.69 in (4)
  • 1.6929 in (4)
  • 1.693 in (5)
  • 1.7 in (3)
  • 1.7323 in (1)
  • 1.75 in (1)
  • 1.77 in (2)
  • 1.7717 in (1)
  • 1.772 in (1)
  • 1.78 in (1)
  • 1.788 in (1)
  • 1.89 in (2)
  • 1.969 in (3)
  • 1.97 in (2)
  • 2.0 in (3)
  • 2.03 in (2)
  • 2.047 in (1)
  • 2.15 in (1)
  • 2.165 in (1)
  • 2.1654 in (3)
  • 2.2 in (2)
  • 2.283 in (1)
  • 2.559 in (3)
  • 2.56 in (4)
  • 2.561 in (1)
  • 2.57 in (1)
  • 2.573 in (1)
  • 2.575 in (1)
  • 3.15 in (3)
  • 3.36 in (2)
  • 3.363 in (2)
Reach Min to Reach Max
Reach
Reach
  • 9.59 mm (1)
  • 11.82 mm (1)
  • 11.94 mm (1)
  • 11.99 mm (1)
  • 12.0 mm (2)
  • 13.19 mm (1)
  • 14.69 mm (1)
  • 15.49 mm (1)
  • 15.5 mm (1)
  • 16.44 mm (1)
  • 16.83 mm (1)
  • 16.99 mm (1)
  • 17.0 mm (1)
  • 17.23 mm (1)
  • 17.71 mm (1)
  • 18.42 mm (1)
  • 20.0 mm (1)
  • 20.07 mm (1)
  • 20.24 mm (1)
  • 20.46 mm (1)
  • 20.5 mm (1)
  • 21.22 mm (1)
  • 22.0 mm (2)
  • 22.1 mm (2)
  • 23.0 mm (1)
  • 23.11 mm (1)
  • 23.65 mm (1)
  • 24.47 mm (1)
  • 24.71 mm (1)
  • 25.0 mm (1)
  • 25.24 mm (1)
  • 25.34 mm (1)
  • 25.4 mm (1)
  • 25.9 mm (2)
  • 26.0 mm (4)
  • 26.48 mm (1)
  • 27.63 mm (1)
  • 27.9 mm (1)
  • 28.0 mm (3)
  • 29.16 mm (1)
  • 30.0 mm (2)
  • 30.24 mm (1)
  • 30.25 mm (1)
  • 32.0 mm (2)
  • 32.16 mm (1)
  • 32.93 mm (1)
  • 33.5 mm (2)
  • 34.04 mm (1)
  • 34.24 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (2)
  • 36.1 mm (1)
  • 36.69 mm (1)
  • 36.8 mm (1)
  • 37.0 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 39.8 mm (1)
  • 40.0 mm (4)
  • 40.1 mm (3)
  • 41.15 mm (1)
  • 41.16 mm (1)
  • 42.67 mm (1)
  • 42.9 mm (2)
  • 42.93 mm (1)
  • 43.0 mm (10)
  • 43.2 mm (3)
  • 44.0 mm (1)
  • 44.5 mm (1)
  • 44.96 mm (1)
  • 45.0 mm (3)
  • 45.2 mm (1)
  • 45.4 mm (1)
  • 48.0 mm (2)
  • 50.0 mm (5)
  • 50.8 mm (3)
  • 51.56 mm (2)
  • 52.0 mm (1)
  • 54.6 mm (1)
  • 55.0 mm (4)
  • 55.9 mm (2)
  • 58.0 mm (1)
  • 65.0 mm (7)
  • 65.0494 mm (1)
  • 65.2 mm (1)
  • 65.4 mm (2)
  • 68.4 mm (1)
  • 75.2 mm (1)
  • 75.4 mm (1)
  • 80.0 mm (4)
  • 81.5 mm (1)
  • 85.3 mm (2)
  • 85.4 mm (2)
  • 89.66 mm (1)
  • 91.4 mm (1)
  • 92.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 100.3 mm (1)
  • 128.0 mm (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 88.217 (10)
  • 90.0 (145)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (23)
  • Straight-Cylindrical (56)
  • Weldon (102)
Number of Flutes
Number of Flutes
  • 1 (46)
  • 2 (32)
  • 3 (45)
  • 4 (34)
  • 5 (12)
  • 6 (6)
  • 7 (3)
  • 8 (1)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (104)
  • 2.0 (212)
  • 3.0 (60)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (42)
  • 0.002 in (22)
  • 0.0024 in (35)
  • 0.0031 in (34)
  • 0.0043 in (28)
  • 0.0055 in (35)
  • 0.0094 in (35)
  • 0.0098 in (13)
  • 0.0106 in (13)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (42)
  • 0.05 mm (22)
  • 0.06 mm (35)
  • 0.08 mm (34)
  • 0.11 mm (28)
  • 0.14 mm (35)
  • 0.24 mm (35)
  • 0.25 mm (13)
  • 0.27 mm (13)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC610M (233)
  • KC620M (39)
  • KC635M (254)
  • KCU32 (23)
  • KCU33 (19)
Hand Of Tool
Hand Of Tool
  • R (181)
Wiper Insert
Wiper Insert
  • N (190)
Countersunk Angle
Countersunk Angle
  • 27.5 (18)
  • 30.0 (58)
Countersunk Angle Min to Countersunk Angle Max
frontEnd
Cutting Width
Cutting Width
  • 0.33 in (1)
  • 0.34 in (1)
  • 0.35 in (4)
  • 0.36 in (1)
  • 0.37 in (1)
  • 0.38 in (3)
  • 0.39 in (5)
  • 0.4 in (1)
  • 0.41 in (1)
  • 0.52 in (3)
  • 0.55 in (5)
  • 0.56 in (3)
  • 0.57 in (7)
  • 0.58 in (4)
  • 0.59 in (5)
  • 0.7 in (1)
  • 0.866 in (2)
  • 0.889 in (2)