Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

KM4X™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (171)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (171)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (171)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (171)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (171)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (171)
  • M Stainless Steel (171)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (171)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (171)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (171)
  • K Cast Iron (171)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (171)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (171)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (171)
  • N Non-Ferrous Materials (162)
    • N1
      Wrought Aluminum
      (158)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (158)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (98)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (159)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (156)
    • N6
      Carbon, Graphite Composites, CFRP
      (148)
    • N7
      MMC's
      (143)
  • S High-Temp Alloys (171)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (171)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (171)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (171)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (171)
  • H Hardened Materials (147)
    • H1
      Hardened Materials 44-48 HRC
      (147)
    • H2
      Hardened Materials 48-55 HRC
      (133)
    • H3
      Hardened Materials 56-60 HRC
      (125)
    • H4
      Hardened Materials >60 HRC
      (119)
Applications
Applications
  • Chamfer Turning Chamfer Turning (17)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (20)
  • Face Grooving Face Grooving (6)
  • Facing Facing (133)
  • Grooving Grooving (20)
  • ID Facing ID Facing (80)
  • ID Grooving ID Grooving (16)
  • ID Thread Turning ID Thread Turning (22)
  • Multiple Direction Cutting Multiple Direction Cutting (99)
  • OD Thread Turning OD Thread Turning (26)
  • Plunge Turning Plunge Turning (16)
  • Profiling Profiling (81)
  • TRN Boring TRN Boring (122)
  • Threading Threading (24)
  • Turning Turning (141)
Type of Thread
Type of Thread
  • 55 (8)
  • 60 (22)
  • ACME (24)
  • API (20)
  • API BUTTRESS (4)
  • API RD (14)
  • BSPT (4)
  • BSW (16)
  • BUTTRESS (14)
  • M (16)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (16)
  • TR DIN 103 (8)
  • UN (18)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (151)
  • Interrupted (88)
  • Lightly Interrupted Cut (151)
  • Smooth Cut (151)
  • Varying Depth of Cut (151)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (5)
  • 48.0 (5)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 75.0 (17)
  • 90.0 (54)
  • 93.0 (35)
  • 95.0 (42)
  • 107.5 (10)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (94)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (100)
  • 2.0 (116)
  • 3.0 (34)
  • 4.0 (88)
  • 6.0 (18)
  • 8.0 (54)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (2)
  • 0.0012 in (1)
  • 0.0015 in (15)
  • 0.002 in (8)
  • 0.0023 in (4)
  • 0.0026 in (8)
  • 0.0028 in (3)
  • 0.003 in (17)
  • 0.0031 in (9)
  • 0.0032 in (2)
  • 0.0033 in (1)
  • 0.0034 in (1)
  • 0.0037 in (8)
  • 0.0038 in (5)
  • 0.0039 in (1)
  • 0.004 in (87)
  • 0.0043 in (1)
  • 0.0046 in (8)
  • 0.005 in (8)
  • 0.0052 in (8)
  • 0.0053 in (9)
  • 0.0059 in (8)
  • 0.006 in (10)
  • 0.0062 in (8)
  • 0.0063 in (2)
  • 0.0065 in (14)
  • 0.0068 in (8)
  • 0.007 in (9)
  • 0.0075 in (14)
  • 0.0078 in (10)
  • 0.0079 in (6)
  • 0.008 in (78)
  • 0.0083 in (20)
  • 0.0088 in (9)
  • 0.0093 in (8)
  • 0.0094 in (1)
  • 0.0096 in (4)
  • 0.0099 in (8)
  • 0.01 in (14)
  • 0.0106 in (9)
  • 0.011 in (2)
  • 0.0111 in (8)
  • 0.0112 in (8)
  • 0.0118 in (8)
  • 0.012 in (2)
  • 0.0124 in (8)
  • 0.0125 in (19)
  • 0.013 in (27)
  • 0.0135 in (14)
  • 0.014 in (8)
  • 0.0155 in (6)
  • 0.0156 in (107)
  • 0.0158 in (11)
  • 0.0159 in (8)
  • 0.016 in (85)
  • 0.017 in (12)
  • 0.0175 in (14)
  • 0.0186 in (4)
  • 0.0193 in (8)
  • 0.02 in (10)
  • 0.021 in (2)
  • 0.0225 in (18)
  • 0.031 in (98)
  • 0.0312 in (101)
  • 0.0313 in (121)
  • 0.0315 in (26)
  • 0.0325 in (6)
  • 0.0355 in (14)
  • 0.0394 in (8)
  • 0.0468 in (14)
  • 0.0469 in (121)
  • 0.047 in (103)
  • 0.0472 in (20)
  • 0.0492 in (8)
  • 0.0516 in (7)
  • 0.0591 in (8)
  • 0.0623 in (8)
  • 0.0625 in (119)
  • 0.063 in (82)
  • 0.0689 in (8)
  • 0.078 in (8)
  • 0.0787 in (14)
  • 0.0886 in (14)
  • 0.0928 in (4)
  • 0.0938 in (50)
  • 0.094 in (41)
  • 0.0984 in (6)
  • 0.106 in (4)
  • 0.125 in (17)
  • 0.126 in (12)
  • 0.1563 in (18)
  • 0.1575 in (4)
  • 0.1969 in (7)
  • 0.236 in (7)
  • 0.2362 in (7)
  • 0.25 in (2)
  • 0.312 in (19)
  • 0.315 in (3)
  • 0.375 in (2)
  • 0.5 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (3)
  • 0.038 mm (15)
  • 0.051 mm (8)
  • 0.057 mm (4)
  • 0.066 mm (8)
  • 0.076 mm (17)
  • 0.08 mm (10)
  • 0.094 mm (8)
  • 0.097 mm (5)
  • 0.1 mm (68)
  • 0.102 mm (54)
  • 0.116 mm (4)
  • 0.117 mm (4)
  • 0.127 mm (8)
  • 0.131 mm (8)
  • 0.132 mm (8)
  • 0.133 mm (8)
  • 0.15 mm (8)
  • 0.152 mm (10)
  • 0.157 mm (8)
  • 0.16 mm (7)
  • 0.165 mm (14)
  • 0.173 mm (8)
  • 0.178 mm (9)
  • 0.19 mm (14)
  • 0.191 mm (14)
  • 0.198 mm (8)
  • 0.2 mm (76)
  • 0.202 mm (8)
  • 0.203 mm (40)
  • 0.224 mm (8)
  • 0.235 mm (8)
  • 0.244 mm (4)
  • 0.25 mm (8)
  • 0.251 mm (8)
  • 0.254 mm (14)
  • 0.269 mm (9)
  • 0.282 mm (8)
  • 0.284 mm (8)
  • 0.3 mm (8)
  • 0.315 mm (11)
  • 0.318 mm (19)
  • 0.33 mm (8)
  • 0.34 mm (27)
  • 0.343 mm (6)
  • 0.356 mm (8)
  • 0.394 mm (6)
  • 0.397 mm (94)
  • 0.4 mm (107)
  • 0.404 mm (8)
  • 0.406 mm (10)
  • 0.43 mm (8)
  • 0.432 mm (4)
  • 0.445 mm (14)
  • 0.472 mm (4)
  • 0.49 mm (8)
  • 0.508 mm (8)
  • 0.565 mm (3)
  • 0.57 mm (4)
  • 0.572 mm (18)
  • 0.575 mm (10)
  • 0.6 mm (10)
  • 0.787 mm (8)
  • 0.79 mm (7)
  • 0.792 mm (37)
  • 0.794 mm (99)
  • 0.8 mm (121)
  • 0.826 mm (6)
  • 0.902 mm (14)
  • 1.0 mm (8)
  • 1.188 mm (14)
  • 1.19 mm (18)
  • 1.191 mm (94)
  • 1.194 mm (8)
  • 1.195 mm (4)
  • 1.2 mm (121)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.585 mm (8)
  • 1.587 mm (18)
  • 1.588 mm (85)
  • 1.59 mm (3)
  • 1.6 mm (105)
  • 1.75 mm (8)
  • 1.98 mm (4)
  • 1.981 mm (8)
  • 2.0 mm (14)
  • 2.25 mm (14)
  • 2.38 mm (8)
  • 2.381 mm (15)
  • 2.388 mm (14)
  • 2.39 mm (3)
  • 2.4 mm (42)
  • 2.5 mm (6)
  • 3.175 mm (6)
  • 3.18 mm (9)
  • 3.2 mm (23)
  • 4.0 mm (4)
  • 5.0 mm (7)
  • 6.0 mm (7)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K10M (109)
  • K10P (99)
  • K20K (105)
  • K25P (90)
  • K313 (142)
  • K420 (90)
  • K68 (139)
  • KC5010 (157)
  • KC5025 (152)
  • KC5410 (134)
  • KC5510 (94)
  • KC720 (110)
  • KC730 (130)
  • KC7310 (100)
  • KC732 (95)
  • KC8050 (139)
  • KC810 (145)
  • KC850 (159)
  • KC9010 (95)
  • KC9025 (133)
  • KC910 (132)
  • KC9105 (117)
  • KC9110 (151)
  • KC9120 (130)
  • KC9125 (137)
  • KC9140 (107)
  • KC9145 (103)
  • KC9215 (92)
  • KC9225 (121)
  • KC9240 (126)
  • KC9240NEW (122)
  • KC9245 (94)
  • KC9315 (132)
  • KC9320 (128)
  • KC9325 (113)
  • KC935 (143)
  • KC950 (135)
  • KC990 (109)
  • KCK05 (121)
  • KCK05B (106)
  • KCK15 (116)
  • KCK15B (125)
  • KCK20 (134)
  • KCK20B (138)
  • KCM15 (113)
  • KCM15B (111)
  • KCM25 (129)
  • KCM25B (117)
  • KCM35 (111)
  • KCP05 (107)
  • KCP10 (137)
  • KCP10B (142)
  • KCP25 (140)
  • KCP25B (149)
  • KCP30 (128)
  • KCP30B (103)
  • KCP40 (101)
  • KCP40B (107)
  • KCPK05 (94)
  • KCS10B (116)
  • KCU10 (153)
  • KCU25 (141)
  • KT315 (113)
  • KU10T (105)
  • KU30T (129)
  • KY3000 (96)
  • KY3500 (90)
  • KYK35 (90)
  • NL250 (95)
  • NL920 (90)
  • TN10P (120)
  • TN10U (89)
  • TN15M (109)
  • TN20K (113)
  • TN20P (117)
  • TN30M (111)
  • TN30P (94)
  • TN5015 (104)
  • TN5020 (102)
  • TN5120 (110)
  • TN7010 (110)
  • TN7015 (119)
  • TN7025 (119)
  • TN7035 (102)
  • TN7110 (118)
  • TN7115 (117)
  • TN7125 (111)
  • TN7135 (102)
  • TN8025 (110)
  • WK05CT (107)
  • WK20CT (118)
  • WM15CT (113)
  • WM25CT (116)
  • WM35CT (94)
  • WP15CT (125)
  • WP25CT (125)
  • WP35CT (119)
  • WS10PT (105)
  • WS25PT (102)
  • WU10HT (113)
Hand Of Tool
Hand Of Tool
  • L (44)
  • N (7)
  • R (43)
Wiper Insert
Wiper Insert
  • N (171)
  • Y (83)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 32.0 mm (6)
  • 40.0 mm (12)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 50.0 mm (10)
  • 57.2 mm (2)
  • 63.0 mm (6)
  • 80.0 mm (4)
  • 86.0 mm (38)
  • 88.9 mm (2)
  • 100.0 mm (12)
  • 120.0 mm (33)
  • 139.7 mm (2)
  • 174.6 mm (2)
  • 209.6 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.26 in (6)
  • 1.575 in (12)
  • 1.626 in (2)
  • 1.874 in (2)
  • 1.969 in (10)
  • 2.252 in (2)
  • 2.48 in (6)
  • 3.15 in (4)
  • 3.386 in (38)
  • 3.5 in (2)
  • 3.9 in (1)
  • 3.937 in (11)
  • 4.724 in (33)
  • 5.5 in (2)
  • 6.874 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (19)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (19)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (18)
  • E (28)
  • S (48)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (61)
  • NEGATIVE-ZERO (13)
  • NEUTRAL (ZERO) (15)
Maximum Bore Depth
Maximum Bore Depth
  • 2.756 in (42)
  • 3.477 in (6)
  • 3.937 in (33)
  • 4.42 in (12)
  • 4.485 in (3)
  • 4.49 in (7)
  • 4.528 in (12)
  • 5.671 in (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (42)
  • 88.33 mm (6)
  • 100.0 mm (33)
  • 112.27 mm (12)
  • 113.92 mm (3)
  • 114.05 mm (7)
  • 115.0 mm (12)
  • 144.05 mm (6)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (40)
frontEnd
Adapter Front-End
Adapter Front-End
  • BOEING TAPER FLANGE (1)
  • BORING BAR ADAPTER (2)
  • CARTRIDGE MOUNT (12)
  • COMBI SHELL ADAPTER (5)
  • CUTOFF SUPPORT BLADE (6)
  • END MILL ADAPTER (49)
  • ER COLLET CHUCK (19)
  • FM ADAPTER (1)
  • HTS MODULAR ADAPTER (2)
  • HYDRAULIC CHUCK (62)
  • HYDRAULIC CHUCK-HIGH TORQUE (9)
  • HYDRAULIC CHUCK-SLIM LINE (8)
  • KM MODULAR ADAPTER (25)
  • REDUCER (4)
  • SCREW-ON ADAPTER (19)
  • SHELL MILL ADAPTER (76)
  • SHRINK FIT ADAPTER (95)
  • SQUARE SHANK ADAPTER (17)
  • TUNABLE SHELL MILL ADAPTER (6)
  • WHISTLE DRIVE ADAPTER (1)
  • WHISTLE NOTCH ADAPTER (24)
Clamp Style
Clamp Style
  • D (41)
  • M (33)
  • N (28)
  • P (35)
  • S (35)
  • X (3)
Cutting Width
Cutting Width
  • 0.0394 in (8)
  • 0.047 in (8)
  • 0.0472 in (8)
  • 0.0591 in (8)
  • 0.062 in (8)
  • 0.0689 in (8)
  • 0.072 in (8)
  • 0.078 in (8)
  • 0.0787 in (8)
  • 0.079 in (4)
  • 0.0866 in (8)
  • 0.088 in (8)
  • 0.0886 in (4)
  • 0.094 in (8)
  • 0.097 in (8)
  • 0.0984 in (8)
  • 0.105 in (8)
  • 0.108 in (8)
  • 0.1083 in (8)
  • 0.11 in (8)
  • 0.118 in (8)
  • 0.1181 in (14)
  • 0.122 in (8)
  • 0.125 in (14)
  • 0.126 in (14)
  • 0.128 in (8)
  • 0.131 in (4)
  • 0.1378 in (14)
  • 0.142 in (8)
  • 0.156 in (8)
  • 0.157 in (8)
  • 0.1574 in (14)
  • 0.1575 in (14)
  • 0.167 in (14)
  • 0.1673 in (8)
  • 0.169 in (8)
  • 0.1771 in (14)
  • 0.1772 in (14)
  • 0.178 in (8)
  • 0.185 in (11)
  • 0.188 in (14)
  • 0.189 in (14)
  • 0.192 in (4)
  • 0.193 in (4)
  • 0.195 in (8)
  • 0.1969 in (6)
  • 0.197 in (10)
  • 0.202 in (6)
  • 0.213 in (6)
  • 0.2165 in (6)
  • 0.2166 in (3)
  • 0.218 in (2)
  • 0.219 in (6)
  • 0.2362 in (10)
  • 0.25 in (12)
  • 0.255 in (6)
  • 0.276 in (4)
  • 0.281 in (6)
  • 0.312 in (6)
  • 0.315 in (2)
  • 0.344 in (4)
  • 0.354 in (4)
  • 0.375 in (6)
  • 0.38 in (4)
  • 0.383 in (2)
  • 1.93 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (8)
  • 1.19 mm (4)
  • 1.194 mm (8)
  • 1.2 mm (8)
  • 1.5 mm (8)
  • 1.57 mm (8)
  • 1.575 mm (8)
  • 1.75 mm (8)
  • 1.829 mm (8)
  • 1.981 mm (8)
  • 2.0 mm (8)
  • 2.2 mm (8)
  • 2.235 mm (8)
  • 2.24 mm (4)
  • 2.25 mm (4)
  • 2.388 mm (8)
  • 2.39 mm (4)
  • 2.464 mm (8)
  • 2.5 mm (8)
  • 2.667 mm (8)
  • 2.743 mm (8)
  • 2.75 mm (8)
  • 2.794 mm (8)
  • 2.997 mm (8)
  • 3.0 mm (14)
  • 3.099 mm (8)
  • 3.17 mm (8)
  • 3.175 mm (14)
  • 3.18 mm (3)
  • 3.2 mm (14)
  • 3.25 mm (8)
  • 3.251 mm (8)
  • 3.32 mm (4)
  • 3.329 mm (4)
  • 3.5 mm (14)
  • 3.607 mm (8)
  • 3.96 mm (8)
  • 3.962 mm (8)
  • 3.974 mm (4)
  • 3.988 mm (8)
  • 4.0 mm (14)
  • 4.242 mm (14)
  • 4.25 mm (8)
  • 4.3 mm (8)
  • 4.5 mm (14)
  • 4.521 mm (8)
  • 4.6 mm (4)
  • 4.699 mm (11)
  • 4.775 mm (14)
  • 4.78 mm (3)
  • 4.785 mm (3)
  • 4.788 mm (3)
  • 4.8 mm (8)
  • 4.801 mm (14)
  • 4.81 mm (8)
  • 4.88 mm (4)
  • 4.9 mm (4)
  • 4.95 mm (8)
  • 5.0 mm (6)
  • 5.004 mm (10)
  • 5.131 mm (6)
  • 5.41 mm (6)
  • 5.5 mm (6)
  • 5.537 mm (2)
  • 5.563 mm (6)
  • 6.0 mm (10)
  • 6.35 mm (12)
  • 6.36 mm (3)
  • 6.48 mm (6)
  • 7.01 mm (4)
  • 7.137 mm (6)
  • 7.925 mm (6)
  • 8.001 mm (2)
  • 8.738 mm (4)
  • 8.992 mm (4)
  • 9.525 mm (6)
  • 9.65 mm (4)
  • 9.73 mm (2)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • BTF - BTF (1)
  • FDA - Milling Cutter Arbor (80)
  • FLK - Flange Adapter Kenna (1)
  • HTS - Deep Hole Index Drill (2)
  • KMS - KM TBD System (2)
  • KMT - KM Adapter (27)
  • MCS - Modular Cartridge System (12)
  • PMK - Prismatic Adapter Kenna (6)
  • SPK-Holding Arbor-Spindle Head (7)
  • SZK - Collet Taper (19)
  • VKT - Square Shank (17)
  • ZYL - Cylindrical Adapter (269)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (44)
  • D-DIAMOND/RHOMBIC 55 (30)
  • LT-TRIANGLE LAY DOWN THREAD 60 (12)
  • R-ROUND (13)
  • S-SQUARE 90 (14)
  • T-TRIANGLE 60 (16)
  • TN-TOP NOTCH (20)
  • V-DIAMOND/RHOMBIC 35 (16)
  • W-TRIGON 80 (10)
Front End Style
Front End Style
  • BTF01 Standard BTF (1)
  • FDA03 Longit &Transver Drive (5)
  • FDA12 Transv Drive&CutRetScr (3)