ํ™˜์˜ํ•ฉ๋‹ˆ๋‹ค
๊ธฐ๋ณธ ์„ค์ •์„ ํ™•์ธํ•ด ์ฃผ์‹ญ์‹œ์˜ค
๊ธฐ๋ณธ ์„ค์ • ์—…๋ฐ์ดํŠธ

์ œํ’ˆ ์ œ์•ˆ

Product Family suggestions

Kennametal ๊ณ ๊ฐ ์„œ๋น„์Šค

๊ณ ๊ฐ ์ง€์›

์ „ ์„ธ๊ณ„ ๊ณ ๊ฐ ์ง€์› ์„ผํ„ฐ์˜ ์—ฐ๋ฝ์ฒ˜ ์ •๋ณด๋ฅผ ์ฐพ์•„๋ณด์„ธ์š”.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
ํ’ˆ๋ชฉ ์žฅ๋ฐ”๊ตฌ๋‹ˆ์— ์„ฑ๊ณต์ ์œผ๋กœ ์ถ”๊ฐ€๋˜์—ˆ์Šต๋‹ˆ๋‹ค
์žฅ๋ฐ”๊ตฌ๋‹ˆ ๋ณด๊ธฐ
ํ’ˆ๋ชฉ are being added to the cart
์žฅ๋ฐ”๊ตฌ๋‹ˆ ๋ณด๊ธฐ

Kennametal ๊ณ ๊ฐ ์„œ๋น„์Šค

๊ณ ๊ฐ ์ง€์›

์ „ ์„ธ๊ณ„ ๊ณ ๊ฐ ์ง€์› ์„ผํ„ฐ์˜ ์—ฐ๋ฝ์ฒ˜ ์ •๋ณด๋ฅผ ์ฐพ์•„๋ณด์„ธ์š”.

ํ’ˆ๋ชฉ ์žฅ๋ฐ”๊ตฌ๋‹ˆ์— ์„ฑ๊ณต์ ์œผ๋กœ ์ถ”๊ฐ€๋˜์—ˆ์Šต๋‹ˆ๋‹ค
์žฅ๋ฐ”๊ตฌ๋‹ˆ ๋ณด๊ธฐ
ํ’ˆ๋ชฉ are being added to the cart
์žฅ๋ฐ”๊ตฌ๋‹ˆ ๋ณด๊ธฐ
Exit Search ์†”๋ฃจ์…˜์œผ๋กœ ๋Œ์•„๊ฐ€๊ธฐ

์†”๋ฃจ์…˜ ์ˆ˜์ •

์†”๋ฃจ์…˜ ์ถ”๊ฐ€

์†”๋ฃจ์…˜ ์ด๋ฆ„:{{SolutionName}}

    ์œ ์‚ฌํ•œ ์ œํ’ˆ:

    ์ด์ „ | ์œ ์‚ฌํ•˜๊ฒŒ ์ˆ˜์ •๋œ

    FIX8โ„ข โ€ข ๋„ค๊ฑฐํ‹ฐ๋ธŒ ์ธ์„œํŠธ โ€ข CNUX-RN

    ๊ณ ๊ฐ•๋„ ์„ ์‚ญ โ€ข ์ดˆ๊ฒฝ ์ธ์„œํŠธ โ€ข ๋„ค๊ฑฐํ‹ฐ๋ธŒ C ์Šคํƒ€์ผ

    ์ œํ’ˆ ๋ฒˆํ˜ธ6710688

    ISO ์นดํƒˆ๋กœ๊ทธ IDCNUX191024LRNANSI ์นดํƒˆ๋กœ๊ทธ IDCNUX6676LRN

    FIX8โ„ข CNUX191024LRN Insert 6710688 - Kennametal
    FIX8โ„ข CNUX191024LRN Insert 6710688 - Kennametal
    FIX8โ„ข CNUX191024LRN Insert 6710688 - Kennametal
    Open expanded view
    FIX8โ„ข CNUX191024LRN Insert 6710688 - Kennametal
    FIX8โ„ข CNUX191024LRN Insert 6710688 - Kennametal
    ์ผ๋ฐ˜์ ์ธ ํ‘œํ˜„
    ์ •๊ฐ€
    $56.97/๊ฐœ๋‹น
    ํ• ์ธ
    ๊ฐ€๊ฒฉ
    /๊ฐœ๋‹น
    ์žฌ๊ณ  ์žˆ์Œ์ด ์ œํ’ˆ์€ ๋” ์ด์ƒ ์‚ฌ์šฉํ•  ์ˆ˜ ์—†์Šต๋‹ˆ๋‹ค.๊ธด ๋ฐฐ์†ก๊ธฐ๊ฐ„
    ์ž์žฌ ๊ฐ€๊ฒฉ ๊ทธ๋ฃน
    ๋ชจ๋“  ๊ฐ€๊ฒฉ ์˜ต์…˜์„ ์•Œ์•„๋ณด๋ ค๋ฉด ๋‹น์‚ฌ ์˜์—…ํŒ€์— ๋ฌธ์˜ํ•˜์„ธ์š”.
    ํŒจํ‚ค์ง€๋กœ ํŒ๋งค 0์ตœ์†Œ ํŒจํ‚ค์ง€ ํฌ๊ธฐ์— ๋งž๊ฒŒ ์กฐ์ •๋ฉ๋‹ˆ๋‹ค.
    ์ตœ์†Œ ์ˆ˜๋Ÿ‰: 0ํŒจํ‚ค์ง€ ํฌ๊ธฐ ์š”๊ฑด์„ ์ถฉ์กฑํ•˜๋„๋ก ์กฐ์ •๋จ.
    ์ด ์ œํ’ˆ์€ ๋” ์ด์ƒ ์‚ฌ์šฉํ•  ์ˆ˜ ์—†์Šต๋‹ˆ๋‹ค.
    • P Steel
    • K Cast Iron
    • 100788768100788768
    • TurningTurning
    • FacingFacing
    • ChamferingChamfering
    {{cadTool}} ํ˜•์‹์„ ์‚ฌ์šฉํ•  ์ˆ˜ ์—†์Šต๋‹ˆ๋‹ค.

    Sending to {{cadTool}} in progress...

    Downloaded file will be available after import in the {{cadTool}} tool library.

    Drawings for 6710688
    Metric
    Inch
    ์ œํ’ˆ ๋ฒˆํ˜ธ6710688
    ISO ์นดํƒˆ๋กœ๊ทธ IDCNUX191024LRN
    ANSI ์นดํƒˆ๋กœ๊ทธ IDCNUX6676LRN
    GradeKCP25B
    See all Product Variants

    ๊ณต์ž‘๋ฌผ ์žฌ๋ฃŒ

    • Steel
    • Cast Iron

    ์‚ฌ์šฉ ๋ฐ ์‘์šฉ ๋ถ„์•ผ

    • 100788768100788768
    • TurningTurning
    • FacingFacing
    • ChamferingChamfering

    ์žฌ์ข…

    KCP25B

    KCP25B

    Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

    Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

    ํŠน์ง• ๋ฐ ์žฅ์ 

    • Inserts can withstand large cutting forces and vibrations due to the holder's rigid clamping system.
    • Large depth of cut (up to 12mm) and feed rate (up to 1.4mm) ensure highest possible metal removal rates in steel, cast iron, and stainless steels.
    • Ideal for medium machining and roughing reducing cost per edge.
    • 8 cutting edges on the insert for higher productivity.
    • Tangential design increases the amount of carbide between the workpiece and the tool holder, allowing the system to take higher loads.
    • With 15% less cutting forces, FIX8 is also well suited for low horsepower lathes.

    ์ด์†ก ๋ฐ ์†๋„๋ฅผ ๊ณ„์‚ฐํ•˜๋ ค๋ฉด ์†”๋ฃจ์…˜์„ ์ƒ์„ฑํ•˜์„ธ์š”.

    ์†”๋ฃจ์…˜ ์ƒ์„ฑ ํ›„ ์ด์†ก ๋ฐ ์†๋„ ์•„์ด์ฝ˜์„ ์„ ํƒํ•˜๋ฉด ์ถ”์ฒœ ๊ฐ’์ด ์ œ๊ณต๋ฉ๋‹ˆ๋‹ค. ๊ธฐ๊ณ„์™€ ์‚ฌ์–‘์„ ์ถ”๊ฐ€ํ•˜์—ฌ ์‚ฌ์šฉ์ž ์ •๋ณด๋ฅผ ์ง€์ •ํ•˜๊ฑฐ๋‚˜ ์Šฌ๋ผ์ด๋”๋ฅผ ์‚ฌ์šฉํ•˜์—ฌ ์กฐ์ •ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

    I have read and accepted the Terms & Conditions of use

    CAD Drawings Models

    Canโ€™t find the file type youโ€™re looking for?

    Product data

    SDS

    ์•ˆ์ „๋ณด๊ฑด์ž๋ฃŒ
    ์™„๋ฒฝํ•˜๊ฒŒ ํ˜ธํ™˜๋˜๋Š” ๊ณต๊ตฌ๋ฅผ ์ฐพ์œผ๋ ค๋ฉด ์†”๋ฃจ์…˜์„ ์ƒ์„ฑํ•˜์„ธ์š”.
     
    ์ƒํ’ˆ๋ช…
    ์ œํ’ˆ ๋ฒˆํ˜ธ
    ISO ์นดํƒˆ๋กœ๊ทธ ID
    ANSI ์นดํƒˆ๋กœ๊ทธ ID
    ์žฌ์ข…
     
    ๋‚ด ์†”๋ฃจ์…˜ ํŽ˜์ด์ง€์— ์„(๋ฅผ) ์ถ”๊ฐ€ํ•˜๋ ค๊ณ  ํ•ฉ๋‹ˆ๋‹ค.. ์ง„ํ–‰ํ•˜์‹œ๊ฒ ์Šต๋‹ˆ๊นŒ?
    Select the destination where you want to move ๋ฐ›๋Š” ์‚ฌ๋žŒ.
    ์‹ ์ œํ’ˆ Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    ์œ ํšจํ•œ ์ด๋ฆ„์„ ์ž…๋ ฅํ•˜์‹ญ์‹œ์˜ค.
    Product(s) successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO ์นดํƒˆ๋กœ๊ทธ ๋ฒˆํ˜ธ

    ANSI ์นดํƒˆ๋กœ๊ทธ ๋ฒˆํ˜ธ

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Canโ€™t find the file type youโ€™re looking for?

    ๋Œ€์‹œ๋ณด๋“œ ์ •๋ณด๋ฅผ ๋ณด๋ ค๋ฉด ๋กœ๊ทธ์ธํ•ด์•ผ ํ•ฉ๋‹ˆ๋‹ค.
    Session expired due to inactivity, please login again
    ์žฅ๋ฐ”๊ตฌ๋‹ˆ์— ์ถ”๊ฐ€ํ•˜๋ ค๋Š” ์ œํ’ˆ()์„ ์‚ฌ์šฉํ•  ์ˆ˜ ์—†์Šต๋‹ˆ๋‹ค. ๊ณ ๊ฐ ์„œ๋น„์Šค์— ๋ฌธ์˜ํ•˜์‹ญ์‹œ์˜ค.
    ํ•ญ๋ชฉ์ด ์žฅ๋ฐ”๊ตฌ๋‹ˆ์— ์ถ”๊ฐ€๋˜์—ˆ์Šต๋‹ˆ๋‹ค.
    ์žฅ๋ฐ”๊ตฌ๋‹ˆ ๋ณด๊ธฐ

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO ์นดํƒˆ๋กœ๊ทธ ๋ฒˆํ˜ธ ๋“ฑ๊ธ‰  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk