Name: KNS® • Arbor Mount • Metric
SKU: 5614826
Rating: 0 (0 reviews)

이송량

KNS® Slotting Cutter • Recommended Starting Feeds [mm/th]
인서트 형상	반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz)
	5%			10%			20%			30–100%
	L	M	H	L	M	H	L	M	H	L	M	H
.S..GP	0,13	0,28	0,35	0,09	0,20	0,32	0,07	0,15	0,32	0,06	0,12	0,30
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

KNS® Slotting Cutter • Recommended Starting Feeds [IPT]
인서트 형상	반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz)
	5%			10%			20%			30–100%
	L	M	H	L	M	H	L	M	H	L	M	H
.S..GP	0.005	0.011	0.027	0.004	0.008	0.020	0.003	0.006	0.015	0.002	0.005	0.012
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

자세히 읽기View Less

속도

KNS® Slotting Cutter • Recommended Starting Speed [m/min]
재종		KCU25			KCPK30			KMF
칩 두께 hex mm		최소		최대	최소		최대	최소		최대
소재 그룹		최대	초기값	최소	최대	초기값	최소	최대	초기값	최소
P	1	260	230	215	455	395	370	295	260	245
	2	220	190	160	280	255	230	250	215	180
	3	200	170	140	255	230	205	230	195	160
	4	180	150	120	225	185	160	205	170	135
	5	150	135	120	190	170	150	170	155	135
	6	130	100	80	160	135	110	150	115	90
M	1	210	170	135	205	185	155	195	170	155
	2	170	150	110	185	160	140	175	150	125
	3	130	120	85	145	130	115	130	115	90
K	1	270	220	170	295	265	240	–	–	–
	2	230	190	160	235	210	190	–	–	–
	3	210	160	140	195	175	160	–	–	–
N	1	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	30	25	20	–	–	–	40	35	30
	2	30	25	20	–	–	–	40	35	30
	3	40	30	20	–	–	–	50	40	30
	4	55	40	25	50	45	35	55	50	35
H	1	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KNS® Slotting Cutter • Recommended Starting Speed [SFM]
재종		KCPK30			KCPK30			KMF
Chip Thickness hex Inch		최소		최대	최소		최대	최소		최대
소재 그룹		최대	초기값	최소	최대	초기값	최소	최대	초기값	최소
P	1	855	755	705	1495	1295	1215	970	855	805
	2	720	625	525	920	835	755	820	705	590
	3	655	560	460	835	755	675	755	640	525
	4	590	490	395	740	605	525	675	560	445
	5	490	445	395	625	560	490	560	510	445
	6	425	330	260	525	445	360	490	375	295
M	1	690	560	445	675	605	510	640	560	510
	2	560	490	360	605	525	460	575	490	410
	3	425	395	280	475	425	375	425	375	295
K	1	885	720	560	970	870	785	–	–	–
	2	755	625	525	770	690	625	–	–	–
	3	690	525	460	640	575	525	–	–	–
N	1	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–
S	1	100	80	65	–	–	–	130	115	100
	2	100	80	65	–	–	–	130	115	100
	3	130	100	65	–	–	–	165	130	100
	4	180	130	80	165	150	115	180	165	115
H	1	–	–	–	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

자세히 읽기View Less

인서트 선택

인서트 선택 가이드

KNS® Slotting Cutter • Insert Selection Guide
소재 그룹	경절삭		범용		중황삭
–	(경절삭용 형상)				(중절삭용 형상)
–	내마모성				인성
–	형상	재종	형상	재종	형상	재종
P1-P2	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
P3-P4	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
P5-P6	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCPM40
M1-M2	.S..GP	KCU25	.S..GP	KCPM40	.S..GP	KCPM40
M3	.S..GP	KCU25	.S..GP	KCPM40	.S..GP	KCPM40
K1-K2	.S..GP	KCU25	.S..GP	KCPK30	.S..GP	KCPK30
K3	.S..GP	KCU25	.S..GP	KCPK30	.S..GP	KCPK30
N1-N2	–	–	.S..GP	KCU25	–	–
N3	–	–	.S..GP	KCU25	–	–
S1-S2	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
S3	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
S4	.S..GP	KCU25	.S..GP	KCU25	.S..GP	KCU25
H1	–	–	–	–	–	–

자세히 읽기View Less

You are about to leave the Solution building process.

Are you sure you want to leave?

제품 번호	5614826
ISO 카탈로그 ID	KNSM125N11X16K032
ANSI 카탈로그 ID	KNSM125N11X16K032
Insert Size [SSC]	16
[BM] Cutting Width Minimum	1.9 mm
[BM] Cutting Width Minimum	0.075 in
[BMAX] Cutting Width Maximum	2.5 mm
[BMAX] Cutting Width Maximum	0.098 in
[D1] Effective Cutting Diameter	125 mm
[D1] Effective Cutting Diameter	4.921 in
[D] Adapter / Shank / Bore Diameter	32 mm
[D] Adapter / Shank / Bore Diameter	1.26 in
[D6] Hub Diameter	47 mm
[D6] Hub Diameter	1.85 in
[CDX] Radial Maximum Depth of Cut	38.2 mm
[CDX] Radial Maximum Depth of Cut	1.504 in
[L1S] Secondary Gage Length	3 mm
[L1S] Secondary Gage Length	0.118 in
[W1] Blade Width	1.6 mm
[W1] Blade Width	0.063 in
[THUB] Hub Thickness	6 mm
[THUB] Hub Thickness	0.236 in
Number of Inserts	11
Gage Insert	XCP16_____
Weight Kilograms	0.15
Max RPM	640

유사한 제품:

KNS® • Arbor Mount • Metric