์ ์ฌํ ์ ํ:
KNSยฎ โข Carbide Insert โข XCP-SGP โข Single Ended
Slot milling insert for flat-bottom machining in multiple materials.
์ ํ ๋ฒํธ5615007
ISO ์นดํ๋ก๊ทธ IDXCP42S500F030SGPANSI ์นดํ๋ก๊ทธ IDXCP42S500F030SGP
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
์ ํ ๋ฒํธ | 5615007 |
ISO ์นดํ๋ก๊ทธ ID | XCP42S500F030SGP |
ANSI ์นดํ๋ก๊ทธ ID | XCP42S500F030SGP |
Grade | KCU25 |
Insert Size | 42 |
[W] Cutting Width | 5.01 mm |
[W] Cutting Width | 0.197 in |
[LI] Insert Length | 18 mm |
[LI] Insert Length | 0.709 in |
[RR] Corner Radius | 0.3 mm |
[RR] Corner Radius | 0.012 in |
[RL] Corner Radius | 0.3 mm |
[RL] Corner Radius | 0.012 in |
[S] Insert Thickness | 4.65 mm |
[S] Insert Thickness | 0.183 in |
Average Chip Thickness [HM] | 0.04 mm |
Average Chip Thickness [HM] | 0.0016 in |
Cutting Edges per Insert | 1 |
๊ณต์๋ฌผ ์ฌ๋ฃ
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
์ฌ์ข
KCU25
๊ตฌ์ฑ: ๊ฒฌ๊ณ ํ AlTiN ์ฝํ
๊ณผ ๋ฏธ๋ฆฝ์ ๋นํฉ๊ธ ์๋ธ์คํธ๋ ์ดํธ์ ๊ณ ๊ธ PVD ์ฌ์ข
์ผ๋ก ์๋กญ๊ฒ ํฅ์๋ ์ฝํ
์ด ํญ๋์ ๋ฒ์์ ์๋์ ์ด์ก ์ฑ๋ฅ์ผ๋ก ์ธ์ ์์ ์ฑ์ ๋์ฌ์ค๋๋ค.
์ ํ๋ฆฌ์ผ์ด์
: KCU25โข ์ฌ์ข
์ ๋จ์ ๊ฐ๊ณต๊ณผ ๊ณ ์ด์ก์ ์ํ ๊ฐํ๋ ์ธ์ ์ธ์ฑ๊ณผ ํญ๋์ ๋ฒ์์ ์๋์ ์ด์ก์ ์ง์ํ์ฌ ๋๋ถ๋ถ์ ๊ฐ, ์คํ
์ธ๋ฆฌ์ค๊ฐ, ๋ด์ดํฉ๊ธ, ํฐํ๋, ์ฒ ๋ฐ ๋น์ฒ ์์ฌ์ ์ผ๋ฐ ๊ฐ๊ณต์ ์ ํฉํฉ๋๋ค.
ํน์ง ๋ฐ ์ฅ์
- From light to heavy machining, the positive SGP chipbreaker geometry ensures smooth cutting action, and efficient chip evacuation.
- The Double-V Design of the insert and the insert pocket securely holds the insert in place, minimises radial runout, providing high slot width accuracy and high repeatability.
์ด์ก ๋ฐ ์๋๋ฅผ ๊ณ์ฐํ๋ ค๋ฉด ์๋ฃจ์ ์ ์์ฑํ์ธ์.
์๋ฃจ์ ์์ฑ ํ ์ด์ก ๋ฐ ์๋ ์์ด์ฝ์ ์ ํํ๋ฉด ์ถ์ฒ ๊ฐ์ด ์ ๊ณต๋ฉ๋๋ค. ๊ธฐ๊ณ์ ์ฌ์์ ์ถ๊ฐํ์ฌ ์ฌ์ฉ์ ์ ๋ณด๋ฅผ ์ง์ ํ๊ฑฐ๋ ์ฌ๋ผ์ด๋๋ฅผ ์ฌ์ฉํ์ฌ ์กฐ์ ํ ์ ์์ต๋๋ค.
์ธ์ํธ ์ ํ
์ธ์ํธ ์ ํ ๊ฐ์ด๋
KNSยฎ Slotting Cutter โข Insert Selection Guide | ||||||
์์ฌ ๊ทธ๋ฃน | ๊ฒฝ์ ์ญ | ๋ฒ์ฉ | ์คํฉ์ญ | |||
โ | (๊ฒฝ์ ์ญ์ฉ ํ์) | (์ค์ ์ญ์ฉ ํ์) | ||||
โ | ๋ด๋ง๋ชจ์ฑ | ์ธ์ฑ | ||||
โ | ํ์ | ์ฌ์ข | ํ์ | ์ฌ์ข | ํ์ | ์ฌ์ข |
P1-P2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
P3-P4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
P5-P6 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCPM40 |
M1-M2 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
M3 | .S..GP | KCU25 | .S..GP | KCPM40 | .S..GP | KCPM40 |
K1-K2 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
K3 | .S..GP | KCU25 | .S..GP | KCPK30 | .S..GP | KCPK30 |
N1-N2 | โ | โ | .S..GP | KCU25 | โ | โ |
N3 | โ | โ | .S..GP | KCU25 | โ | โ |
S1-S2 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
S3 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
S4 | .S..GP | KCU25 | .S..GP | KCU25 | .S..GP | KCU25 |
H1 | โ | โ | โ | โ | โ | โ |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Canโt find the file type youโre looking for?
Product data