KDMT Ball Nose Platform • KDMS • KDMT
The KDMT indexable toroidal copy milling system is a proven solution for roughing and finishing operations. Engineered with a wide range of diameters and insert styles, this platform provides exceptional performance and productivity--especially during flat-bottom and back-draft finishing. The high feed insert style provides high removal rates and precision accuracy. The KDMT copy milling system can be used on a variety of workpiece materials ranging from hardened steel to aluminum. The wide diameter range enables the system to be applied across several types of machining conditions. Toolholders are available with screw-on and cylindrical shanks. KDMS precision inserts are also available.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (70)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(70)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(70)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(70)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(70)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(70)
- M Stainless Steel (70)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(70)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(70)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(70)
- K Cast Iron (70)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(70)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(70)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(70)
- N Non-Ferrous Materials (38)
- N1Wrought Aluminum (38)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(38)
- N3High-Silicon Aluminum Alloys Si >12.2%(38)
- S High-Temp Alloys (38)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(38)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- H Hardened Materials (63)
- H1Hardened Materials 44-48 HRC(52)
- H2Hardened Materials 48-55 HRC(63)
- H3Hardened Materials 56-60 HRC(63)
Applications
Applications
Pocket (28)
Pocket Milling (28)
Profile Milling (28)
Ramping (28)
Shoulder Ball Nose (28)
Shoulder Milling (28)
Slot Milling (28)
Slot Square End (28)
Cutting Diameter
Cutting Diameter
- 10.0 mm(2)
- 12.0 mm(5)
- 12.7 mm(4)
- 15.875 mm(1)
- 16.0 mm(5)
- 19.05 mm(2)
- 20.0 mm(5)
- 25.0 mm(1)
- 25.4 mm(2)
- 32.0 mm(1)
to
Cutting Length
Cutting Length
- 2.5 mm(2)
- 3.0 mm(9)
- 4.0 mm(6)
- 5.0 mm(7)
- 6.0 mm(3)
- 8.0 mm(1)
to
Reach
Reach
- 28.0 mm(2)
- 32.0 mm(1)
- 34.0 mm(2)
- 37.0 mm(3)
- 40.0 mm(1)
- 42.0 mm(1)
- 47.0 mm(3)
- 48.0 mm(2)
- 52.0 mm(4)
- 55.0 mm(1)
- 57.0 mm(2)
- 60.0 mm(1)
- 63.0 mm(1)
- 72.0 mm(1)
- 77.0 mm(1)
- 80.0 mm(1)
- 82.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (20)
to
Connection Style
Connection Style
- Screw-On Connection (3)
- Straight-Cylindrical (25)
Number of Flutes
Number of Flutes
- 2 (28)
Over All Length [L]
Over All Length [L]
- 45.5 mm(2)
- 51.5 mm(1)
- 122.0 mm(3)
- 130.05 mm(1)
- 132.0 mm(1)
- 142.0 mm(3)
- 150.1 mm(1)
- 152.0 mm(2)
- 160.0 mm(3)
- 162.0 mm(4)
- 177.0 mm(2)
- 192.0 mm(2)
- 210.06 mm(1)
- 212.0 mm(1)
- 230.0 mm(1)
to
Corner Radius
Corner Radius
- 0.0 mm(1)
- 0.5 mm(1)
- 0.6 mm(3)
- 0.8 mm(33)
- 1.0 mm(41)
- 1.025 mm(20)
- 1.3 mm(8)
- 1.6 mm(27)
- 2.0 mm(14)
- 2.6 mm(2)
- 3.0 mm(7)
- 4.0 mm(8)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC515M (1)
- KCPH15 (40)
- KCPK10 (54)
- KCPK25 (33)
- KNS10 (2)
Hand Of Tool
Hand Of Tool
- R (28)
Rough Finish
Rough Finish
- F (17)
Wiper Insert
Wiper Insert
- N (49)
Maximum Ramp Angle
Maximum Ramp Angle
- 3.0 (28)
to
Front-End
Cutting Width
Cutting Width
- 6.0 mm(2)
- 6.35 mm(1)
- 7.925 mm(1)
- 8.0 mm(3)
- 9.525 mm(1)
- 10.0 mm(5)
- 12.0 mm(6)
- 12.7 mm(5)
- 16.0 mm(6)
- 19.05 mm(5)
- 20.0 mm(6)
- 25.0 mm(3)
- 25.4 mm(4)
- 32.0 mm(1)
to
Neck Diameter
Neck Diameter
- 8.8 mm(2)
- 10.5 mm(4)
- 10.67 mm(4)
- 14.0 mm(4)
- 14.22 mm(1)
- 18.0 mm(4)
- 18.03 mm(2)
- 22.4 mm(1)
- 22.61 mm(2)
- 28.6 mm(1)
to
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
- DMT-TOROIDAL (49)
Cutting Tool Material
Cutting Tool Material
- H W (49)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (25)
- SCREW-ON (3)
Back-End Diameter
Back-End Diameter
- 10.0 mm(2)
- 12.0 mm(4)
- 12.7 mm(4)
- 13.0 mm(2)
- 15.875 mm(1)
- 16.0 mm(4)
- 18.0 mm(1)
- 19.05 mm(2)
- 20.0 mm(4)
- 25.0 mm(1)
- 25.4 mm(2)
- 32.0 mm(1)
to
No filters matching ""
