KM63TS™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (265)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(265)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(265)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(265)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(265)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(265)
- M Stainless Steel (265)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(265)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(265)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(265)
- K Cast Iron (280)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(280)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(280)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(276)
- N Non-Ferrous Materials (265)
- N1Wrought Aluminum (260)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(260)
- N3High-Silicon Aluminum Alloys Si >12.2%(127)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (265)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (240)
- N6Carbon, Graphite Composites, CFRP (237)
- N7MMC's (239)
- S High-Temp Alloys (276)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(272)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(276)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(272)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(266)
- H Hardened Materials (223)
- H1Hardened Materials 44-48 HRC(223)
- H2Hardened Materials 48-55 HRC(223)
- H3Hardened Materials 56-60 HRC(223)
- H4Hardened Materials >60 HRC(201)
Applications
Applications
Chamfer Turning (8)
Cut-Off (4)
Deep Grooving (4)
Face Grooving (4)
Facing (208)
Grooving (11)
ID Grooving (7)
ID Thread Turning (15)
Multiple Direction Cutting (192)
OD Thread Turning (19)
Plunge Turning (4)
Profiling (135)
TRN Boring (176)
Turning (250)
Type of Thread
Type of Thread
- 55 (8)
- 60 (18)
- ACME (16)
- API (13)
- API BUTTRESS (3)
- API RD (10)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (11)
- NPT (10)
- NPTF (4)
- RD DIN 405 (7)
- STUB ACME (13)
- TR DIN 103 (8)
- UN (14)
- UNJ (10)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (270)
- Lightly Interrupted Cut (270)
- Smooth Cut (272)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (21)
- 48.0 (6)
- 49.783 (1)
- 50.0 (1)
- 62.5 (2)
- 63.0 (4)
- 72.5 (1)
- 75.0 (50)
- 90.0 (47)
- 93.0 (71)
- 95.0 (68)
- 107.5 (18)
to
Connection Style
Connection Style
- KM (163)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (146)
- 2.0 (174)
- 3.0 (43)
- 4.0 (196)
- 6.0 (35)
- 8.0 (118)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 60.0 mm(225)
- 80.0 mm(2)
- 90.0 mm(3)
- 100.0 mm(4)
- 115.0 mm(8)
- 125.0 mm(14)
- 140.0 mm(25)
- 170.0 mm(9)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.0 mm(4)
- 0.025 mm(7)
- 0.05 mm(11)
- 0.075 mm(17)
- 0.1 mm(144)
- 0.125 mm(8)
- 0.15 mm(14)
- 0.175 mm(14)
- 0.2 mm(136)
- 0.225 mm(10)
- 0.25 mm(16)
- 0.275 mm(6)
- 0.3 mm(10)
- 0.325 mm(14)
- 0.35 mm(48)
- 0.4 mm(217)
- 0.425 mm(5)
- 0.45 mm(12)
- 0.475 mm(4)
- 0.5 mm(8)
- 0.525 mm(4)
- 0.55 mm(1)
- 0.575 mm(11)
- 0.6 mm(18)
- 0.625 mm(2)
- 0.65 mm(1)
- 0.7 mm(1)
- 0.75 mm(1)
- 0.775 mm(6)
- 0.8 mm(248)
- 0.825 mm(1)
- 0.9 mm(10)
- 0.925 mm(2)
- 0.95 mm(2)
- 1.0 mm(7)
- 1.2 mm(254)
- 1.25 mm(6)
- 1.4 mm(1)
- 1.5 mm(6)
- 1.575 mm(6)
- 1.6 mm(231)
- 1.75 mm(6)
- 1.975 mm(6)
- 2.0 mm(8)
- 2.25 mm(6)
- 2.375 mm(16)
- 2.4 mm(69)
- 2.5 mm(4)
- 3.175 mm(15)
- 3.2 mm(15)
- 4.0 mm(14)
- 4.775 mm(2)
- 6.35 mm(6)
- 8.0 mm(1)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (143)
- CW3020 (9)
- CW5025 (100)
- K00326 (8)
- K060 (38)
- K090 (30)
- K1 (14)
- K313 (232)
- K420 (10)
- K68 (211)
- K8735 (8)
- KB1340 (74)
- KB1345 (75)
- KB1610 (114)
- KB1630 (92)
- KB5610 (81)
- KB5630 (79)
- KB9640 (7)
- KBH10 (152)
- KBH10B (152)
- KBH20 (162)
- KBH20B (155)
- KBK45 (7)
- KC5010 (255)
- KC5025 (248)
- KC5410 (201)
- KC720 (11)
- KC730 (181)
- KC850 (241)
- KC9110 (2)
- KC9125 (4)
- KCK05 (194)
- KCK05B (85)
- KCK15 (217)
- KCK15B (226)
- KCK20 (241)
- KCK20B (218)
- KCM15 (220)
- KCM15B (220)
- KCM25 (231)
- KCM25B (231)
- KCM25S (2)
- KCM35 (220)
- KCM35B (129)
- KCP05 (161)
- KCP05B (172)
- KCP10 (239)
- KCP10B (246)
- KCP10C (2)
- KCP15 (2)
- KCP20S (2)
- KCP25 (231)
- KCP25B (255)
- KCP25C (256)
- KCP30 (224)
- KCP30B (171)
- KCP40 (199)
- KCP40B (215)
- KCPK05 (210)
- KCS10 (49)
- KCS10B (226)
- KCS25S (2)
- KCU10 (252)
- KCU10B (252)
- KCU20B (8)
- KCU25 (250)
- KCU25B (250)
- KD1400 (87)
- KD1405 (77)
- KD1425 (112)
- KN10S (2)
- KS15 (46)
- KT315 (186)
- KT325 (46)
- KTP10 (167)
- KTP25S (136)
- KY1540 (49)
- KY1615 (3)
- KY3500 (208)
- KY4300 (105)
- KY4400 (178)
- KYHK15B (200)
- KYK10 (90)
- KYK25 (139)
- KYS25 (67)
- KYS30 (110)
- MC3 (2)
- PB100 (34)
- PB250 (3)
- PN120 (1)
- SP4019 (40)
- THM (101)
- THM-X (81)
- THMF-X (51)
- TN10P (157)
- TN10U (122)
- TN15M (112)
- TN15U (84)
- TN2000 (132)
- TN20K (171)
- TN20P (187)
- TN30M (128)
- TN30P (134)
- TN4000 (127)
- TN6010 (75)
- TN6025 (19)
- TTM09 (3)
- TTR (4)
- TTR-X (14)
- TTS (75)
- WBH10P (69)
- WBH10U (34)
- WBH20P (133)
- WBH30P (69)
- WBK40U (13)
- WBK45U (25)
- WDN00U (56)
- WDN25U (90)
- WK05CT (191)
- WK15CT (115)
- WK20CT (206)
- WM15CT (188)
- WM25CT (201)
- WM35CT (168)
- WP05CT (47)
- WP15CT (203)
- WP20TT (2)
- WP25CT (203)
- WP35CT (183)
- WS10PT (189)
- WS25PT (196)
- WU05PT (9)
- WU10HT (190)
- WU10PT (150)
- WU25PT (149)
- X00580 (38)
- X00581 (38)
- X00582 (38)
- X00583 (38)
- X00584 (38)
- X00585 (38)
- X00586 (38)
- X00591 (38)
- X00592 (38)
- X00593 (38)
- X00594 (38)
- X00596 (38)
- X00597 (38)
- X00599 (38)
Hand Of Tool
Hand Of Tool
- L (74)
- N (12)
- R (77)
Wiper Insert
Wiper Insert
- N (280)
- Y (118)
F Dimension
F Dimension
- 0.0 mm(15)
- 8.0 mm(1)
- 17.0 mm(12)
- 22.0 mm(17)
- 27.0 mm(23)
- 35.0 mm(12)
- 38.0 mm(18)
- 43.0 mm(63)
- 59.0 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(12)
- 40.0 mm(17)
- 50.0 mm(16)
- 63.0 mm(12)
- 86.0 mm(4)
- 118.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(4)
- 32.0 mm(12)
- 40.0 mm(17)
- 41.3 mm(2)
- 47.6 mm(2)
- 50.0 mm(16)
- 57.2 mm(2)
- 63.0 mm(12)
- 80.0 mm(40)
- 86.0 mm(74)
- 88.9 mm(2)
- 90.0 mm(2)
- 100.0 mm(17)
- 118.0 mm(2)
- 139.7 mm(2)
- 174.6 mm(2)
- 180.0 mm(4)
- 209.6 mm(2)
- 222.3 mm(2)
- 2000.0 mm(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(11)
to
Cutting Direction
Cutting Direction
- B (41)
- E (39)
- S (83)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (127)
- NEGATIVE-ZERO (17)
- NEUTRAL (ZERO) (19)
Maximum Bore Depth
Maximum Bore Depth
- 50.45 mm(2)
- 60.0 mm(131)
- 62.07 mm(3)
- 77.14 mm(4)
- 88.23 mm(8)
- 88.52 mm(2)
- 104.4 mm(4)
- 112.07 mm(12)
- 112.22 mm(2)
- 113.37 mm(1)
- 115.0 mm(8)
- 117.14 mm(10)
- 117.38 mm(1)
- 149.4 mm(8)
to
Boring Bar Material
Boring Bar Material
- S (63)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (20)
- CARTRIDGE MOUNT (22)
- COMBI SHELL ADAPTER (3)
- CUTOFF SUPPORT BLADE (6)
- END MILL ADAPTER (13)
- ER COLLET CHUCK (7)
- EXTENSION (2)
- HYDRAULIC CHUCK (16)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (8)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (4)
- SCREW-ON ADAPTER (14)
- SHELL MILL ADAPTER (11)
- SHRINK FIT ADAPTER (15)
- SQUARE SHANK ADAPTER (8)
- WHISTLE NOTCH ADAPTER (3)
Clamp Style
Clamp Style
- C (20)
- D (32)
- M (107)
- N (19)
- P (96)
- S (16)
Cutting Width
Cutting Width
- 1.0 mm(6)
- 1.19 mm(3)
- 1.194 mm(6)
- 1.2 mm(6)
- 1.5 mm(6)
- 1.57 mm(6)
- 1.575 mm(6)
- 1.75 mm(6)
- 1.829 mm(6)
- 1.981 mm(6)
- 2.0 mm(6)
- 2.2 mm(6)
- 2.235 mm(6)
- 2.236 mm(3)
- 2.25 mm(3)
- 2.387 mm(3)
- 2.388 mm(6)
- 2.39 mm(3)
- 2.464 mm(6)
- 2.5 mm(6)
- 2.667 mm(6)
- 2.75 mm(6)
- 2.794 mm(6)
- 2.997 mm(6)
- 3.0 mm(10)
- 3.099 mm(6)
- 3.17 mm(6)
- 3.175 mm(10)
- 3.18 mm(2)
- 3.2 mm(8)
- 3.25 mm(6)
- 3.251 mm(3)
- 3.32 mm(3)
- 3.5 mm(10)
- 3.607 mm(6)
- 3.96 mm(6)
- 3.962 mm(6)
- 3.974 mm(3)
- 3.988 mm(6)
- 4.0 mm(10)
- 4.242 mm(4)
- 4.25 mm(6)
- 4.5 mm(10)
- 4.521 mm(6)
- 4.699 mm(6)
- 4.775 mm(10)
- 4.78 mm(2)
- 4.785 mm(2)
- 4.788 mm(2)
- 4.8 mm(6)
- 4.801 mm(10)
- 4.88 mm(3)
- 4.95 mm(6)
- 4.953 mm(3)
- 4.978 mm(6)
- 5.0 mm(4)
- 5.004 mm(2)
- 5.41 mm(4)
- 5.5 mm(4)
- 6.0 mm(4)
- 6.35 mm(4)
- 6.36 mm(2)
- 6.502 mm(4)
- 7.137 mm(1)
- 7.925 mm(1)
- 9.677 mm(1)
to
Front End Type
Front End Type
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (14)
- KMS - KM TBD System (1)
- KMT - KM Adapter (12)
- MCS - Modular Cartridge System (22)
- PMK - Prismatic Adapter Kenna (6)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (7)
- VKT - Square Shank (8)
- ZYL - Cylindrical Adapter (84)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (73)
- D-DIAMOND/RHOMBIC 55 (74)
- FIX-PERFECT 8 CUT EDGES (4)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- R-ROUND (9)
- S-SQUARE 90 (49)
- T-TRIANGLE 60 (22)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (19)
- W-TRIGON 80 (17)
Cartridge Size
Cartridge Size
- 26 (4)
- 32 (2)
- 50 (12)
- 65 (10)
Front End Style
Front End Style
- BKA01 Intchg Heads (H) Pilot (7)
- FDA12 Transv Drive&CutRetScr (7)
- FDA13 Long&TranDrv&CutRetScr (3)
- FDA22 Transv Drive & SHCS (3)
- FDA42TranDrvw/CtrScrwORBoltCir (1)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (12)
- MCS01 Modular Deep Grooving (22)
- PMK02 Cutoff Sup Bld A1-A3 (6)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (7)
- VKT01 Std Design (8)
- ZYL01 Straight Shank (41)
- ZYL03 Attachment Thread (14)
- ZYL10 Weldon Shank (13)
- ZYL13 2Deg-Whistle Notch (3)
- ZYL22 Boring Bar Shank (13)
Insert Size
Insert Size
- 3 (6)
- 4 (4)
- 5 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 5.33 mm(4)
- 7.47 mm(2)
- 33.0 mm(1)
to
Gage Length
Gage Length
- 23.0000 mm(2)
- 25.0000 mm(2)
- 26.0000 mm(1)
- 28.0000 mm(1)
- 32.0000 mm(5)
- 35.0000 mm(2)
- 35.2500 mm(2)
- 40.0000 mm(3)
- 45.0000 mm(2)
- 50.0000 mm(2)
- 53.5000 mm(4)
- 55.0000 mm(3)
- 55.3000 mm(2)
- 58.5000 mm(6)
- 59.0000 mm(4)
- 60.0000 mm(8)
- 63.5000 mm(8)
- 65.0000 mm(6)
- 66.5000 mm(4)
- 70.0000 mm(7)
- 75.0000 mm(3)
- 76.2000 mm(1)
- 78.6900 mm(1)
- 80.0000 mm(14)
- 82.5500 mm(2)
- 84.0000 mm(3)
- 85.0000 mm(3)
- 85.7250 mm(1)
- 90.0000 mm(5)
- 95.0000 mm(5)
- 95.2500 mm(1)
- 100.0000 mm(7)
- 101.6000 mm(1)
- 105.0000 mm(2)
- 109.0000 mm(5)
- 114.0000 mm(2)
- 115.0000 mm(1)
- 120.0000 mm(6)
- 134.0000 mm(2)
- 134.2900 mm(1)
- 134.5500 mm(2)
- 147.0000 mm(1)
- 160.0000 mm(3)
- 170.0000 mm(5)
- 207.3300 mm(1)
- 234.5500 mm(1)
- 283.5000 mm(1)
- 310.7100 mm(1)
- 334.3100 mm(1)
- 359.7300 mm(1)
- 361.5200 mm(1)
- 385.1100 mm(1)
- 386.9200 mm(1)
- 412.3200 mm(1)
- 486.7300 mm(1)
- 513.9200 mm(1)
Front End Size
Front End Size
- 6.0 mm(3)
- 6.35 mm(1)
- 8.0 mm(3)
- 9.525 mm(3)
- 10.0 mm(3)
- 12.0 mm(5)
- 12.7 mm(5)
- 14.0 mm(3)
- 15.875 mm(3)
- 16.0 mm(5)
- 18.0 mm(3)
- 19.05 mm(6)
- 20.0 mm(6)
- 22.0 mm(1)
- 22.225 mm(1)
- 25.0 mm(5)
- 25.4 mm(6)
- 27.0 mm(2)
- 31.0 mm(1)
- 31.75 mm(5)
- 32.0 mm(9)
- 38.1 mm(4)
- 40.0 mm(11)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(2)
- 50.8 mm(3)
- 63.0 mm(2)
- 63.5 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (151)
- B L (162)
- C A (209)
- C N (212)
- D P (150)
- H T (186)
- H W (274)
Back-End
Connection Type
Connection Type
- TAPER SHANK (163)
System Size
System Size
- KM40TS (2)
- KM50TS (4)
- KM63TS (307)
- KM63UT (1)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (4)
Back-End Diameter
Back-End Diameter
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(439)
- 80.0 mm(8)
to
No filters matching ""
