Inserts for Chamfer Mill - SEHW 1556286 - Kennametal
Producto similar a:
Inserts for Chamfer Mill • SEHW
Indexable Inserts • KISBR-45
Número de material1556286
Referencia ISOSEHW1204AFNReferencia ANSISEHW43A6
Precio de Venta
$35.57/cada una
Descuento
Su precio
/cada una
DisponibleEste producto ya no está disponiblePlazo de entrega largo
Grupo de Precios de Materiales
Se vende en paquetes de 0Ajustado para cumplir con el tamaño mínimo del paquete.
Cantidad mínima: 0Ajustado para cumplir con la cantidad mínima de pedido.
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
MetricInch
| Número de material | 1556286 |
| Referencia ISO | SEHW1204AFN |
| Referencia ANSI | SEHW43A6 |
| Calidad | KC715M |
| Tamaño IC de plaquita [D] | 12.7 mm |
| Tamaño IC de plaquita [D] | 0.5 in |
| Grosor de plaquita [S] | 4.763 mm |
| Grosor de plaquita [S] | 0.1875 in |
| Longitud de filo de corte de plaquita [L10] | 12.7 mm |
| Longitud de filo de corte de plaquita [L10] | 0.5 in |
| Longitud de cara de esquina [BS] | 2.7 mm |
| Longitud de cara de esquina [BS] | 0.106 in |
| Radio de esquina [Rε] | 1 mm |
| Radio de esquina [Rε] | 0.039 in |
| Grosor medio de las virutas [HM] | 0.038 mm |
| Grosor medio de las virutas [HM] | 0.0015 in |
| Filos de corte por plaquita | 4 |
Grades
KC715M
KC715M is ideal for dry machining. The deformation substrate combined with a PVD coating can handle high temperatures and higher surface speeds. It is promarily for use in light and general machining of steels, stainless steel and cast steel.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
Feeds
Chamfer Mills • 30°
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .004 | .015 | .030 | .003 | .011 | .022 | .003 | .009 | .019 | .003 | .009 | .018 | .002 | .009 | .017 | SDEB |
Chamfer Mills • KIPR • 45°
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SDEB |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
Chamfer Mills • 45°
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SEH. | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SEH. |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
Chamfer Mills • 60°
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .007 | .026 | .053 | .005 | .019 | .038 | .005 | .016 | .033 | .004 | .015 | .031 | .004 | .015 | .030 | SDEB |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
Leer másView Less
Speeds
Recommended Starting Speeds [SFM]
| Grupo de materiales | KC510M | KC520M | KC725M | KCK15 | KCPK30 | |||||||||||
| P | 1 | – | – | – | – | – | – | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | – | – | – | – | – | – | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | – | – | – | – | – | – | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | – | – | – | – | – | – | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | – | – | – | – | – | – | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | – | – | – | – | – | – | 520 | 400 | 310 | – | – | – | 620 | 540 | - | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | – | – | – | 820 | 720 | 620 |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | – | – | – | 730 | 640 | 550 | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | – | – | – | 570 | 520 | 460 | |
| K | 1 | – | – | – | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | – | – | – | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | – | – | – | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Recommended Starting Speeds [SFM]
| Grupo de materiales | KC520M | KC725M | KCPK30 | |||||||
| P | 1 | – | – | – | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 520 | 400 | 310 | 620 | 540 | - | |
| M | 1 | – | – | – | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | 1060 | 960 | 850 | – | – | – | 1160 | 1050 | 940 |
| 2 | 830 | 740 | 700 | – | – | – | 920 | 830 | 760 | |
| 3 | 700 | 620 | 560 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – |
Leer másView Less
Insert Selection
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | (Geometría fuerte) | ||||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | (Geometría fuerte) | ||||
| – | resistencia | | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| P3–P4 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| P5–P6 | SEHT-T | KCPK30 | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| M1–M2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| M3 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| K1–K2 | SEHW | KC520M | SEHW | KC520M | SEHW-T | KCPK30 |
| K3 | SEHW | KC520M | SEHW-T | KCPK30 | SEHW-T | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S3 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S4 | SEHT | KC725M | SEHT-T | KC725M | SEHT-T | KC725M |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | (Geometría fuerte) | ||||
| – | resistencia | | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | (Geometría fuerte) | ||||
| – | resistencia | | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
Leer másView Less
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data