+1
Drilling: Stacked Plates
Corner Style: Corner Chamfer
Taladrado
Dimensiones de la herramienta: 2 canales/2 márgenes/refrigerante
Taladrado — Con refrigeración interna
Con refrigeración interna: MQL (cantidad mínima de lubricante): Taladrado
Mango — Liso cilíndrico ≤h6Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 6782352 |
| Referencia ISO | B226A05558HPX |
| Referencia ANSI | B226A05558HPX |
| Calidad | KCP15B |
| Diámetro de broca M [D1] | 5.558 mm |
| Diámetro de broca M [D1] | 0.2188 in |
| Longitud total [L] | 94 mm |
| Longitud total [L] | 3.7008 in |
| Longitud del canal [L3] | 56 mm |
| Longitud del canal [L3] | 2.2047 in |
| Profundidad máxima de taladrado [L4] | 48 mm |
| Profundidad máxima de taladrado [L4] | 1.8898 in |
| Longitud de punta de broca [L5] | 1.22 mm |
| Longitud de punta de broca [L5] | 0.048 in |
| Longitud de mango [LS] | 36 mm |
| Longitud de mango [LS] | 1.4173 in |
| Adaptador/Mango/Diá int [D] | 6 mm |
| Adaptador/Mango/Diá int [D] | 0.2362 in |
Drilling: Stacked PlatesCorner Style: Corner ChamferTaladradoDimensiones de la herramienta: 2 canales/2 márgenes/refrigeranteTaladrado — Con refrigeración internaCon refrigeración interna: MQL (cantidad mínima de lubricante): TaladradoMango — Liso cilíndrico ≤h6Grades
KCP15B
Composición: Metal duro de grano submicrón recubierto con base de PVD AlTiN multicapa con excelente acabado superficial.
Aplicación: La primera opción para acero. Un recubrimiento patentado combinado con una condición superficial de última generación da como resultado una vida de la herramienta insuperable, así como la consistencia del rendimiento en todas las piezas de trabajo en acero en condiciones de corte elevadas.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Grupo de materiales | | | |||||||||||
| Velocidad de corte | Pulgadas | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
| P | 0 | 460 | 790 | 950 | IPR | 0.005–0.009 | 0.005–0.010 | 0.006–0.012 | 0.007–0.013 | 0.008–0.015 | 0.008–0.017 | 0.010–0.020 | 0.011–0.023 |
| 1 | 430 | 790 | 950 | IPR | 0.006–0.012 | 0.006–0.013 | 0.007–0.015 | 0.008–0.018 | 0.009–0.020 | 0.009–0.022 | 0.011–0.027 | 0.013–0.032 | |
| 2 | 620 | 750 | 890 | IPR | 0.005–0.012 | 0.006–0.013 | 0.007–0.015 | 0.008–0.017 | 0.009–0.019 | 0.011–0.022 | 0.013–0.026 | 0.015–0.030 | |
| 3 | 430 | 520 | 620 | IPR | 0.006–0.012 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.010–0.020 | 0.012–0.022 | 0.014–0.027 | 0.017–0.031 | |
| 4 | 360 | 490 | 560 | IPR | 0.005–0.010 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | 0.010–0.017 | 0.012–0.019 | 0.015–0.023 | 0.017–0.027 | |
| 5 | 230 | 300 | 360 | IPR | 0.004–0.008 | 0.005–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.012–0.020 | 0.014–0.024 | |
| 6 | 200 | 260 | 330 | IPR | 0.004–0.008 | 0.005–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.012–0.020 | 0.014–0.024 | |
| | ||||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 140 | 240 | 290 | mm/r | 0,13–0,24 | 0,14–0,26 | 0,15–0,30 | 0,17–0,34 | 0,19–0,38 | 0,21–0,42 | 0,24–0,50 | 0,28–0,58 |
| 1 | 130 | 240 | 290 | mm/r | 0,15–0,30 | 0,16–0,33 | 0,18–0,39 | 0,20–0,45 | 0,22–0,51 | 0,24–0,57 | 0,28–0,69 | 0,32–0,81 | |
| 2 | 190 | 230 | 270 | mm/r | 0,14–0,29 | 0,15–0,32 | 0,18–0,38 | 0,21–0,43 | 0,24–0,49 | 0,27–0,55 | 0,33–0,66 | 0,39–0,77 | |
| 3 | 130 | 160 | 190 | mm/r | 0,15–0,30 | 0,17–0,33 | 0,20–0,38 | 0,23–0,44 | 0,26–0,50 | 0,29–0,56 | 0,36–0,67 | 0,42–0,79 | |
| 4 | 110 | 150 | 170 | mm/r | 0,13–0,25 | 0,15–0,27 | 0,19–0,33 | 0,22–0,38 | 0,26–0,43 | 0,30–0,48 | 0,37–0,59 | 0,44–0,69 | |
| 5 | 70 | 90 | 110 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| 6 | 60 | 80 | 100 | mm/r | 0,11–0,21 | 0,13–0,24 | 0,15–0,28 | 0,18–0,33 | 0,21–0,38 | 0,24–0,42 | 0,29–0,51 | 0,35–0,61 | |
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Pulgadas | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Mín | Valor inicial | Máx. | 1/8 0.125 | 3/16 0.188 | 1/4 0.250 | 5/16 0.313 | 3/8 0.375 | 1/2 0.500 | 5/8 0.625 | 3/4 0.750 | |||
| P | 0 | 230 | 430 | 490 | IPR | 0.006–0.011 | 0.006–0.012 | 0.007–0.014 | 0.008–0.016 | 0.009–0.018 | 0.010–0.020 | 0.011–0.023 | 0.013–0.027 |
| 1 | 230 | 430 | 490 | IPR | 0.007–0.014 | 0.007–0.015 | 0.008–0.018 | 0.009–0.021 | 0.010–0.024 | 0.011–0.027 | 0.013–0.032 | 0.015–0.038 | |
| 2 | 330 | 390 | 460 | IPR | 0.006–0.014 | 0.007–0.015 | 0.008–0.018 | 0.010–0.020 | 0.011–0.023 | 0.013–0.025 | 0.015–0.031 | 0.018–0.036 | |
| 3 | 230 | 300 | 330 | IPR | 0.007–0.014 | 0.008–0.015 | 0.009–0.018 | 0.011–0.021 | 0.012–0.023 | 0.014–0.026 | 0.017–0.031 | 0.020–0.037 | |
| 4 | 200 | 260 | 300 | IPR | 0.006–0.012 | 0.007–0.013 | 0.009–0.015 | 0.010–0.018 | 0.012–0.020 | 0.014–0.022 | 0.017–0.027 | 0.020–0.032 | |
| 5 | 130 | 160 | 200 | IPR | 0.005–0.010 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | 0.010–0.017 | 0.011–0.020 | 0.014–0.024 | 0.016–0.028 | |
| 6 | 100 | 130 | 160 | IPR | 0.005–0.010 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | 0.010–0.017 | 0.011–0.020 | 0.014–0.024 | 0.016–0.028 | |
| Grupo de materiales | | | |||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| | ||||||||||||
| Velocidad de corte | Sistema métrico | ||||||||||||
| Rango | Avance recomendado por rev. | ||||||||||||
| Grupo de materiales | Mín | Valor inicial | Máx. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 70 | 130 | 150 | mm/r | 0,15–0,28 | 0,16–0,31 | 0,18–0,35 | 0,20–0,40 | 0,22–0,45 | 0,25–0,50 | 0,29–0,59 | 0,33–0,68 |
| 1 | 70 | 130 | 150 | mm/r | 0,18–0,35 | 0,19–0,39 | 0,21–0,46 | 0,24–0,53 | 0,26–0,60 | 0,28–0,67 | 0,33–0,81 | 0,38–0,96 | |
| 2 | 100 | 120 | 140 | mm/r | 0,16–0,35 | 0,18–0,38 | 0,21–0,45 | 0,25–0,51 | 0,28–0,58 | 0,32–0,64 | 0,39–0,78 | 0,46–0,91 | |
| 3 | 70 | 90 | 100 | mm/r | 0,18–0,35 | 0,19–0,38 | 0,23–0,45 | 0,27–0,52 | 0,31–0,59 | 0,35–0,66 | 0,42–0,80 | 0,50–0,93 | |
| 4 | 60 | 80 | 90 | mm/r | 0,16–0,29 | 0,18–0,32 | 0,22–0,38 | 0,26–0,45 | 0,31–0,51 | 0,35–0,57 | 0,43–0,69 | 0,52–0,81 | |
| 5 | 40 | 50 | 60 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| 6 | 30 | 40 | 50 | mm/r | 0,13–0,25 | 0,15–0,28 | 0,18–0,33 | 0,21–0,39 | 0,25–0,44 | 0,28–0,50 | 0,35–0,61 | 0,41–0,71 | |
| gama de tamaños nominales | D1 tolerancia m7 | D tolerancia h6 |
| 1–3 | 0,002/0,012 | 0,000/-0,006 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 |
| gama de tamaños nominales | D1 tolerancia m7 | D tolerancia h6 |
| 0.0394–0.1181 | 0.0001/.0005 | 0.0000/-0.0002 |
| 0.0002/0.0006 | 0.0000/-0.0003 | |
| 0.0002/0.0008 | 0.0000/-0.0004 | |
| 0.003/0.0010 | 0.0000/-0.0004 | |
| 0.0003/0.0011 | 0.0000/-0.0005 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?