LT-ER-60CB --- LT-ER/L-NPTF Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (388)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(388)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(388)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(388)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(388)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(388)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(388)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(388)
- M Stainless Steel (388)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(388)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(388)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(388)
- K Cast Iron (388)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(388)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(388)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(388)
- N Non-Ferrous Materials (193)
- N1Wrought Aluminum (193)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(193)
- N3High-Silicon Aluminum Alloys Si >12.2%(193)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (193)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (193)
- N6Carbon, Graphite Composites, CFRP (193)
- N7MMC's (193)
- S High-Temp Alloys (388)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(388)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(388)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(388)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(388)
- H Hardened Materials (193)
- H1Hardened Materials 44-48 HRC(193)
- H2Hardened Materials 48-55 HRC(193)
Select First Choice
- DE (27)
- GB (20)
- SG (19)
Applications
Applications
ID Thread Turning (2)
OD Thread Turning (371)
Type of Thread
Type of Thread
- 55 (14)
- 60 (24)
- ACME (17)
- API (18)
- API BUTTRESS (2)
- API RD (5)
- BSPT (5)
- BSW (48)
- M (86)
- NPT (18)
- NPTF (7)
- RD DIN 405 (5)
- STUB ACME (16)
- TR DIN 103 (11)
- UN (84)
- UNJ (29)
Availability
GSA Approved Product
GSA Approved Product
Corner Radius
Corner Radius
- 0.0 mm(3)
- 0.05 mm(44)
- 0.075 mm(24)
- 0.1 mm(48)
- 0.125 mm(5)
- 0.15 mm(25)
- 0.175 mm(8)
- 0.2 mm(45)
- 0.225 mm(23)
- 0.25 mm(24)
- 0.275 mm(6)
- 0.3 mm(17)
- 0.325 mm(27)
- 0.35 mm(9)
- 0.4 mm(5)
- 0.425 mm(3)
- 0.45 mm(15)
- 0.475 mm(7)
- 0.5 mm(7)
- 0.525 mm(9)
- 0.575 mm(2)
- 0.6 mm(4)
- 0.625 mm(8)
- 0.65 mm(1)
- 0.7 mm(1)
- 0.725 mm(1)
- 0.75 mm(4)
- 0.8 mm(3)
- 0.95 mm(5)
- 1.0 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (52)
- KC5025 (143)
- KC720 (1)
- KCU20B (193)
Countersunk Angle
Countersunk Angle
- 10.0 (2)
- 14.5 (33)
- 15.0 (15)
- 27.5 (67)
- 30.0 (272)
to
Front-End
Cutting Width
Cutting Width
- 0.046 mm(1)
- 0.472 mm(1)
- 0.474 mm(1)
- 0.53 mm(3)
- 0.6 mm(2)
- 0.61 mm(1)
- 0.62 mm(2)
- 0.71 mm(1)
- 0.73 mm(3)
- 0.83 mm(2)
- 0.84 mm(3)
- 0.95 mm(2)
- 0.968 mm(2)
- 1.05 mm(2)
- 1.25 mm(2)
- 1.32 mm(2)
- 1.46 mm(1)
- 1.465 mm(2)
- 1.69 mm(4)
- 1.75 mm(2)
- 1.93 mm(1)
- 2.04 mm(3)
- 2.24 mm(1)
- 2.43 mm(2)
- 2.58 mm(2)
to
Thread TPI
Thread TPI
- 4.0 (19)
- 4.5 (2)
- 4.6 (1)
- 5.0 (14)
- 5.5 (2)
- 6.0 (11)
- 6.3 (4)
- 7.0 (14)
- 8.0 (33)
- 9.0 (3)
- 10.0 (21)
- 11.0 (10)
- 11.5 (7)
- 12.0 (29)
- 14.0 (50)
- 16.0 (33)
- 18.0 (17)
- 19.0 (3)
- 20.0 (23)
- 24.0 (14)
- 25.0 (8)
- 27.0 (3)
- 28.0 (13)
- 31.0 (2)
- 32.0 (8)
- 33.0 (7)
- 36.0 (3)
- 40.0 (3)
- 48.0 (24)
- 50.0 (6)
- 63.0 (2)
to
Thread Pitch
Thread Pitch
- 0.4 mm(2)
- 0.5 mm(7)
- 0.52 mm(2)
- 0.6 mm(1)
- 0.63 mm(2)
- 0.7 mm(4)
- 0.75 mm(7)
- 0.79 mm(7)
- 0.8 mm(2)
- 0.9 mm(16)
- 1.0 mm(22)
- 1.25 mm(23)
- 1.33 mm(3)
- 1.4 mm(3)
- 1.5 mm(41)
- 1.75 mm(49)
- 1.8 mm(6)
- 2.0 mm(29)
- 2.2 mm(7)
- 2.3 mm(10)
- 2.5 mm(21)
- 2.75 mm(2)
- 2.8 mm(1)
- 3.0 mm(55)
- 3.5 mm(8)
- 3.6 mm(3)
- 4.0 mm(10)
- 4.2 mm(5)
- 4.5 mm(2)
- 5.0 mm(17)
- 5.5 mm(1)
- 5.6 mm(1)
- 6.0 mm(13)
- 6.3 mm(7)
to
Insert Geometry
Insert IC Size
Insert IC Size
- 9.525 mm(324)
- 12.7 mm(49)
- 15.875 mm(16)
to
Insert Seat Size
Insert Seat Size
- 16 (302)
- 22 (48)
- 27 (16)
Cutting Edge Length
Cutting Edge Length
- 0.75 mm(1)
- 14.3 mm(288)
- 16.3 mm(2)
- 16.5 mm(4)
- 19.1 mm(47)
- 23.8 mm(13)
to
No filters matching ""
