欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
项目 已成功添加到购物车
查看购物车
项目 are being added to the cart
查看购物车

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

项目 已成功添加到购物车
查看购物车
项目 are being added to the cart
查看购物车
Exit Search 回到解决方案

编辑解决方案

添加解决方案

解决方案名称:{{SolutionName}}

    产品类似于:

    返回到 | 修改类似于

    DFSP Whistle Notch WD 刀柄 • 5 x D

    Drill Fix™ DFSP™ 刀体

    物料号100030867

    DFSP Whistle Notch WD 刀柄 • 5 x D
    DFSP Whistle Notch WD 刀柄 • 5 x D
    DFSP Whistle Notch WD 刀柄 • 5 x D
    Open expanded view
    DFSP Whistle Notch WD 刀柄 • 5 x D
    DFSP Whistle Notch WD 刀柄 • 5 x D
    通用表示形式
    请联系我们的销售人员来了解您的定价。

    Features and benefits

    • DFSP 产品将经济型的方形外侧刀片与具有卓越定中心性能的三边形内侧刀片的优点结合在一起。
    • 发送钻头产品时还包括刀片螺钉和六星扳手。
    • DFSP 使用刀片需要单独订购。了解刀片产品，请参看 J89–J90 页的内容。
    • 钻孔钻孔
    • 钻孔： 斜切进刀钻孔： 斜切进刀
    • 钻孔： 斜退刀钻孔： 斜退刀
    • 钻孔： X－偏移钻孔： X－偏移
    • 钻孔： 凸面钻孔： 凸面
    • 刀柄 — 圆柱 哨形凹槽 带有驱动和凸缘刀柄 — 圆柱 哨形凹槽 带有驱动和凸缘
    • 贯通式冷却： 径向： 可转位钻孔贯通式冷却： 径向： 可转位钻孔
    • 钻孔： 盲孔钻孔： 盲孔
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    警告 • Drill Fix DFR

    警告 在通孔加工中、刀具在穿过工件时会产生块状或圆盘状物体。在钻头处于静止状态、工件处于旋转状态时、 块状物或圆盘状物会因离心力而从夹具上飞出。应提供有效的防护措施。
    DLSCS
    2045—
    3258R 1/4 BSP *
    4068R 1/4 BSP
    5068R 1/4 BSP
    DLS
    2050
    2556
    3260
    4070
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    公制
    切削速度 vc公制
    范围 m/min根据直径推荐进给率（fz）
    材料 分组condition刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 14,00-17,49SPGX06 DFT03 17,50-21,99SPGX07 DFT05 22.00-25,99SPGX09 DFT05 26.00-32,99SPGX12 DFT06/..07 33,00-43,99SPGX15 DFT07/..09 44,00-55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3SIMDKC7140260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3UIMDKC7140180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIMDKC7140110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4SIMDKC7140220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4UIMDKC7140150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIMDKC714090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IHPKC7140
    IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1SIMDKC7140150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2SIMDKC7140150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3SIHPKC7140100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3UIHPKC714080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值 Ø
    N1SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    2SOLPKCU40150180210mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKCU40200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOFPKCU25120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKC7140120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOFPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOFPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300毫米/转0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOFPKCU25120155200毫米/转0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOFPKC714080100125毫米/转0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    2SOFPKCPK10180220260毫米/转0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170毫米/转0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120毫米/转0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    3SOHPKCPK10180220260毫米/转0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170毫米/转0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120毫米/转0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    N1SOLPKCU40150190230毫米/转0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    2SOLPKCU40150180210毫米/转0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230毫米/转0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100毫米/转0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    N1SOHPKCPK10350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKMF350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOHPKCU40300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKMF300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKCU40175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKMF175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKCU40150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKMF150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOHPKCU25300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4SIHPKC7140300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4UIHPKC7140250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIHPKC7140200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU40400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5SIHPKMF400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    公制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围 m/min
    最小值初始值最大值ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOHPKCU40506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    4SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    公制
    切削速度 vc
    范围 m/min根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1SIMDKC7140607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1UOHPKCU40405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1UIMDKC7140405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2SOHPKCU40506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2SIMDKC7140506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2UOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2UIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk