Toolholders with Through Coolant
ISO holders with through coolant direct the coolant where it is needed. Coolant nozzles point the coolant to the cutting zone where the chip is being formed. This controls and manages heat more efficiently, providing maximum tool life and process safety. The through coolant toolholders are available as Kenlever™, Screw-On, and Kenloc™ clamping styles.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (48)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(48)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(48)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(48)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(48)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(48)
- M Stainless Steel (48)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(48)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(48)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(48)
- K Cast Iron (48)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(48)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(48)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(48)
- N Non-Ferrous Materials (40)
- N1Wrought Aluminum (40)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(40)
- N3High-Silicon Aluminum Alloys Si >12.2%(32)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (40)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (40)
- N6Carbon, Graphite Composites, CFRP (40)
- N7MMC's (40)
- S High-Temp Alloys (48)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(48)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(48)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(48)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(48)
- H Hardened Materials (40)
- H1Hardened Materials 44-48 HRC(40)
- H2Hardened Materials 48-55 HRC(40)
- H3Hardened Materials 56-60 HRC(40)
- H4Hardened Materials >60 HRC(40)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (48)
- Lightly Interrupted Cut (48)
- Smooth Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (4)
- 93.0 (28)
- 95.0 (16)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (4)
- 1.0 (32)
- 2.0 (32)
- 3.0 (8)
- 4.0 (28)
- 6.0 (12)
- 8.0 (8)
to
Over All Length [L]
Over All Length [L]
- 87.5 mm(2)
- 93.0 mm(2)
- 93.5 mm(2)
- 95.0 mm(2)
- 96.0 mm(2)
- 97.0 mm(6)
- 98.0 mm(2)
- 99.5 mm(2)
- 103.0 mm(2)
- 104.0 mm(2)
- 105.0 mm(2)
- 105.5 mm(2)
- 107.0 mm(2)
- 108.0 mm(2)
- 109.0 mm(8)
- 110.0 mm(2)
- 115.0 mm(2)
- 116.0 mm(2)
- 121.0 mm(2)
to
Corner Radius
Corner Radius
- 0.0 mm(12)
- 0.025 mm(12)
- 0.05 mm(16)
- 0.075 mm(4)
- 0.1 mm(32)
- 0.2 mm(36)
- 0.35 mm(4)
- 0.4 mm(48)
- 0.6 mm(4)
- 0.8 mm(48)
- 1.2 mm(44)
- 1.6 mm(24)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (4)
- K090 (4)
- K313 (40)
- K68 (28)
- KB1340 (12)
- KB1345 (16)
- KB1610 (24)
- KB1630 (16)
- KB5610 (16)
- KB5630 (20)
- KBH10 (40)
- KBH10B (40)
- KBH20 (40)
- KBH20B (40)
- KC5010 (48)
- KC5020P (4)
- KC5025 (48)
- KC5410 (36)
- KC730 (36)
- KC850 (40)
- KCK05 (48)
- KCK05B (24)
- KCK15 (44)
- KCK15B (44)
- KCK20 (40)
- KCK20B (48)
- KCM15 (44)
- KCM15B (44)
- KCM25 (48)
- KCM25B (48)
- KCM25S (8)
- KCM35 (36)
- KCM35B (28)
- KCP05 (44)
- KCP05B (40)
- KCP10 (48)
- KCP10B (48)
- KCP10C (8)
- KCP15 (4)
- KCP20S (8)
- KCP25 (44)
- KCP25B (48)
- KCP25C (48)
- KCP30 (44)
- KCP30B (20)
- KCP40 (20)
- KCP40B (28)
- KCPK05 (28)
- KCS10 (20)
- KCS10B (44)
- KCS25S (8)
- KCU10 (48)
- KCU10B (48)
- KCU25 (48)
- KCU25B (48)
- KD1400 (28)
- KD1405 (12)
- KD1425 (32)
- KN10S (12)
- KS15 (4)
- KT315 (48)
- KT325 (20)
- KTP10 (48)
- KTP25S (36)
- KY1540 (4)
- KY3500 (24)
- KY4300 (4)
- KY4400 (24)
- KYHK15B (24)
- KYK10 (12)
- KYK25 (12)
- KYS25 (8)
- KYS30 (12)
- SP4019 (8)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Hand Of Tool
Hand Of Tool
- L (24)
- R (24)
Wiper Insert
Wiper Insert
- N (48)
- Y (32)
F Dimension
F Dimension
- 25.0 mm(22)
- 32.0 mm(26)
to
Cutting Direction
Cutting Direction
- B (20)
- S (28)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (28)
- NEGATIVE-ZERO (4)
- NEUTRAL (ZERO) (16)
Front-End
Clamp Style
Clamp Style
- M (8)
- P (24)
- S (16)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- D-DIAMOND/RHOMBIC 55 (12)
- S-SQUARE 90 (4)
- T-TRIANGLE 60 (4)
- V-DIAMOND/RHOMBIC 35 (12)
- W-TRIGON 80 (8)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (36)
- B L (40)
- C A (24)
- C N (24)
- D P (36)
- H T (48)
- H W (48)
Back-End
Shank Height
Shank Height
- 20.0 mm(24)
- 25.0 mm(24)
to
Shank Width
Shank Width
- 20.0 mm(22)
- 25.0 mm(26)
to
No filters matching ""
For any technical inquiries, please reach out to us via our Customer Support center