Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 2209971 |
| ISO Catalog ID | ADKT1545PDERGB |
| ANSI Catalog ID | ADKT2328PDER5GB |
| Grade | KCPK30 |
| [LI] Insert Length | 15 mm |
| [LI] Insert Length | 0.5905 in |
| [S] Insert Thickness | 4.5 mm |
| [S] Insert Thickness | 0.1772 in |
| [W] Insert Width | 10 mm |
| [W] Insert Width | 0.394 in |
| [BS] Corner Facet Length | 2.636 mm |
| [BS] Corner Facet Length | 0.1038 in |
| [Rε] Corner Radius | 0.8 mm |
| [Rε] Corner Radius | 0.031 in |
| Average Chip Thickness [HM] | 0.064 mm |
| Average Chip Thickness [HM] | 0.0025 in |
| Cutting Edges per Insert | 2 |
Grades
KCPK30
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||
| 10% | 20 | |||||||||
| ADCT…E..LD | 0,10 | 0,20 | 0,36 | 0,05 | 0,13 | 0,23 | 0,05 | 0,13 | 0,20 | ADCT…E..LD |
| Light | General | Heavy |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||
| 10% | 20 | |||||||||
| ADCT…E..LD | .004 | .008 | .014 | .002 | .005 | .009 | .002 | .005 | .008 | ADCT…E..LD |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||
| 50 | ||||
| All Inserts | .004 | .010 | .016 | All Inserts |
| Light | General | Heavy |
| Material Group | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 10 | 250 | 230 | 150 | 135 | 120 | 260 | 230 | 210 | – | – | – | |
| 6 | 190 | 170 | 145 | 90 | 80 | – | 160 | 135 | – | – | – | – | |
| M | 1 | 225 | 200 | 175 | 170 | 150 | 135 | 205 | 185 | 155 | – | – | – |
| 2 | 205 | 175 | 160 | 155 | 140 | 130 | 185 | 160 | 140 | – | – | – | |
| 3 | 160 | 145 | 125 | 115 | 105 | – | 145 | 130 | 115 | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 35 | 30 | 25 | – | – | – | – | – | – |
| 2 | – | – | – | 30 | 30 | 25 | – | – | – | – | – | – | |
| 3 | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | |
| 4 | – | – | – | 50 | 45 | 30 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Material Group | KCPM20 | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 30 | 820 | 750 | 490 | 440 | 400 | 850 | 760 | 690 | – | – | – | |
| 6 | 630 | 550 | 475 | 300 | 260 | – | 520 | 450 | – | – | – | – | |
| M | 1 | 730 | 655 | 570 | 560 | 490 | 450 | 680 | 600 | 515 | – | – | – |
| 2 | 670 | 580 | 520 | 510 | 460 | 420 | 610 | 530 | 460 | – | – | – | |
| 3 | 530 | 475 | 410 | 380 | 340 | – | 475 | 430 | 380 | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 120 | 100 | 80 | – | – | – | – | – | – |
| 2 | – | – | – | 100 | 100 | 80 | – | – | – | – | – | – | |
| 3 | – | – | – | 130 | 120 | 80 | – | – | – | – | – | – | |
| 4 | – | – | – | 170 | 150 | 100 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Material Group | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | 650 | 490 | 400 | 520 | 400 | 310 | – | – | – | – | – | – | |
| M | 1 | 800 | 710 | 650 | 670 | 590 | 540 | – | – | – | – | – | – |
| 2 | 730 | 620 | 520 | 610 | 520 | 430 | – | – | – | – | – | – | |
| 3 | 550 | 480 | 370 | 460 | 400 | 310 | – | – | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 160 | 140 | 110 | 120 | 100 | – | – | – | – | – | – | – |
| 2 | 160 | 140 | 110 | 100 | 100 | – | – | – | – | – | – | – | |
| 3 | 200 | 160 | 110 | 130 | 130 | – | – | – | – | – | – | – | |
| 4 | 280 | 200 | 140 | 170 | 150 | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | ADCT…E..LD | KCPM20 | ADCT…E..LD | KCPM20 | ADCT…E..LD | KCPK30 |
| M1–M2 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| M3 | ADCT…E..LD | KCPK30 | ADCT…E..LD | KCPK30 | ADCT…E..LD | KCPK30 |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| S3 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| S4 | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M | ADCT…E..LD | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?