Rectificado en rampa: Material en bruto
Ranurado: Nariz de bola
Fresado lateral/Fresado en escuadra: Nariz de bola
Perfilado 3D
Mango — Liso cilíndrico
Mecanizado de alojamientosDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3759533 |
| Referencia ISO | KIPR062RP21229 |
| Referencia ANSI | KIPR062RP21229 |
| Diámetro de corte máximo [D1MAX] | 15.875 mm |
| Diámetro de corte máximo [D1MAX] | 0.625 in |
| Diámetro de corte efectivo [D1] | 9.525 mm |
| Diámetro de corte efectivo [D1] | 0.375 in |
| Adaptador/Mango/Diá int [D] | 15.875 mm |
| Adaptador/Mango/Diá int [D] | 0.625 in |
| Longitud total [L] | 74.93 mm |
| Longitud total [L] | 2.95 in |
| Longitud de cabeza [L2] | 25.93 mm |
| Longitud de cabeza [L2] | 1.0209 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 3.18 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | 0.125 in |
| Número de plaquitas | 2 |
| Ángulo de vaciado máximo | 12 |
| RPM máx. | 37400 |
| Calibre de plaquita | RP_2150_ |
| Peso en libras | 0.21 |
Rectificado en rampa: Material en brutoRanurado: Nariz de bolaFresado lateral/Fresado en escuadra: Nariz de bolaPerfilado 3DMango — Liso cilíndricoMecanizado de alojamientosCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .005 | .007 | .004 | .004 | .005 | .003 | .003 | .004 | .003 | .003 | .004 | .003 | .003 | .004 | ..E |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .010 | .011 | .014 | .007 | .008 | .010 | .006 | .007 | .009 | .006 | .007 | .008 | .006 | .006 | .008 | ..E |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .006 | .008 | .004 | .004 | .006 | .004 | .004 | .005 | .003 | .004 | .005 | .003 | .004 | .005 | ..E |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .007 | .008 | .010 | .005 | .006 | .008 | .005 | .005 | .007 | .004 | .005 | .006 | .004 | .005 | .006 | ..E |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .005 | .007 | .004 | .004 | .005 | .003 | .003 | .004 | .003 | .003 | .004 | .003 | .003 | .004 | ..E |
| ..T | .007 | .008 | .010 | .005 | .006 | .008 | .004 | .005 | .007 | .004 | .005 | .006 | .004 | .005 | .006 | ..T |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .006 | .008 | .004 | .004 | .006 | .004 | .004 | .005 | .003 | .004 | .005 | .003 | .004 | .005 | ..E |
| ..T | .008 | .009 | .012 | .006 | .007 | .009 | .005 | .006 | .008 | .005 | .006 | .007 | .005 | .006 | .007 | ..T |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .010 | .011 | .014 | .007 | .008 | .010 | .006 | .007 | .009 | .006 | .007 | .008 | .006 | .006 | .008 | ..E |
| ..T | .014 | .017 | .021 | .010 | .012 | .016 | .009 | .011 | .014 | .008 | .010 | .013 | .008 | .010 | .012 | ..T |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .007 | .008 | .010 | .005 | .006 | .008 | .005 | .005 | .007 | .004 | .005 | .006 | .004 | .005 | .006 | ..E |
| ..T | .010 | .012 | .015 | .008 | .009 | .011 | .007 | .008 | .010 | .006 | .007 | .009 | .006 | .007 | .009 | ..T |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .005 | .007 | .004 | .004 | .005 | .003 | .003 | .004 | .003 | .003 | .004 | .003 | .003 | .004 | ..E |
| ..T | .007 | .010 | .011 | .005 | .008 | .009 | .004 | .007 | .007 | .004 | .006 | .007 | .004 | .006 | .007 | ..T |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .005 | .006 | .008 | .004 | .004 | .006 | .004 | .004 | .005 | .003 | .004 | .005 | .003 | .004 | .005 | ..E |
| ..T | .008 | .012 | .013 | .006 | .009 | .010 | .005 | .008 | .009 | .005 | .007 | .008 | .005 | .007 | .008 | ..T |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .010 | .011 | .014 | .007 | .008 | .010 | .006 | .007 | .009 | .006 | .007 | .008 | .006 | .006 | .008 | ..E |
| ..T | .014 | .022 | .024 | .010 | .016 | .018 | .009 | .014 | .015 | .008 | .013 | .014 | .008 | .013 | .014 | ..T |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| ..E | .007 | .008 | .010 | .005 | .006 | .008 | .005 | .005 | .007 | .004 | .005 | .006 | .004 | .005 | .006 | ..E |
| ..T | .010 | .016 | .017 | .008 | .012 | .013 | .007 | .010 | .011 | .006 | .010 | .010 | .006 | .009 | .010 | ..T |
| Grupo de materiales | KYHS10 | KYSM10 | KYSP30 | KYS30 | KY2100 | KY4300 | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | 3960 | 3200 | 2380 | 3000 | 2400 | 1800 | 3000 | 2400 | 1800 | 3300 | 2670 | 1980 | – | – | – | |
| 6 | – | – | – | 3960 | 3200 | 2380 | 3000 | 2400 | 1800 | 3000 | 2400 | 1800 | 3300 | 2670 | 1980 | – | – | – | |
| M | 1 | – | – | – | 3960 | 3200 | 2380 | – | – | – | – | – | – | 3300 | 2670 | 1980 | – | – | – |
| 2 | – | – | – | 3740 | 3000 | – | – | – | – | – | – | – | 3120 | 2500 | – | – | – | – | |
| 3 | – | – | – | 2760 | 2400 | – | – | – | – | – | – | – | 2300 | 2000 | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 1680 | 1320 | 960 | 3490 | 2860 | 2220 | 2640 | 2160 | 1680 | 2640 | 2160 | 1680 | 2910 | 2380 | 1850 | – | – | – |
| 2 | 1680 | 1320 | 960 | 3490 | 2860 | 2220 | 2640 | 2160 | 1680 | 2640 | 2160 | 1680 | 2910 | 2380 | 1850 | 1400 | 1100 | 800 | |
| 3 | 2400 | 2040 | 1680 | 5080 | 4130 | 3180 | 3840 | 3120 | 2400 | 3840 | 3120 | 2400 | 4230 | 3440 | 2650 | 2000 | 1700 | 1400 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | 1200 | 1020 | 780 | – | – | – | – | – | – | – | – | – | – | – | – | 1000 | 850 | 650 |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | ..E | KYSP30 | ..E | KYSP30 | ..E | KYSP30 |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ..E | KYS30 | ..E | KYS30 | ..E | KYS30 |
| S3 | ..E | KYS30 | ..E | KYS30 | ..E | KYS30 |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia | | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | ..E | KYSP30 | ..E | KYSP30 | ..E | KYSP30 |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ..E | KYS30 | ..E | KYS30 | ..E | KYS30 |
| S3 | ..E | KYS30 | ..E | KYS30 | ..E | KYS30 |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia | | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | ..E | KYSP30 | ..E | KYSP30 | ..E | KYSP30 |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ..E | KYS30 | ..E | KYS30 | ..T | KYS30 |
| S3 | ..E | KYS30 | ..T | KYS30 | ..T | KYS30 |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?