Vaciado
Fresado — Con refrigeración interna
Fresado — lateral y planeadoDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3448917 |
| Referencia ISO | KSSZR400SD430M6A08 |
| Referencia ANSI | KSSZR400SD430M6A08 |
| Diámetro de corte efectivo [D1] | 101.6 mm |
| Diámetro de corte efectivo [D1] | 4 in |
| Adaptador/Mango/Diá int [D] | 38.1 mm |
| Adaptador/Mango/Diá int [D] | 1.5 in |
| Diámetro de núcleo [D6] | 85.72 mm |
| Diámetro de núcleo [D6] | 3.375 in |
| Longitud total [L] | 63.5 mm |
| Longitud total [L] | 2.5 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 11 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | 0.4331 in |
| Número de plaquitas | 8 |
| Ángulo de vaciado máximo | 0.5 |
| RPM máx. | 14460 |
| Calibre de plaquita | SD_T43_PD_N__Z |
| Peso en libras | 4.64 |
VaciadoFresado — Con refrigeración internaFresado — lateral y planeadoCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Geometría de plaquita | Avance por diente (fz) programado como % de la profundidad radial de corte (ae) | Geometría de plaquita | ||
| 50–100% | ||||
| Todas las plaquitas | 0,004 | 0,010 | 0,016 | Todas las plaquitas |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LE | — | — | — | — | — | — | — | — | — | — | — | — | 0,05 | 0,10 | 0,20 | .F..LE |
| .E..GDZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,09 | 0,25 | 0,41 | .E..GDZ |
| .S..GDZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .S..GDZ |
| .E..HPZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .E..HPZ |
| .S..HPZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .S..HPZ |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LE | — | — | — | — | — | — | — | — | — | — | — | — | 0,05 | 0,10 | 0,20 | .F..LE |
| .E..GDZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,09 | 0,25 | 0,41 | .E..GDZ |
| .S..GDZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .S..GDZ |
| .E..HPZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .E..HPZ |
| .S..HPZ | — | — | — | — | — | — | — | — | — | — | — | — | 0,10 | 0,25 | 0,41 | .S..HPZ |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LE | .002 | .004 | .008 | .F..LE | ||||||||||||
| .E..GDZ | .004 | .010 | .016 | .E..GDZ | ||||||||||||
| .S..GDZ | .004 | .010 | .016 | .S..GDZ | ||||||||||||
| .E..HPZ | .004 | .010 | .016 | .E..HPZ | ||||||||||||
| .S..HPZ | .004 | .010 | .016 | .S..HPZ | ||||||||||||
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LE | .002 | .004 | .008 | .F..LE | ||||||||||||
| .E..GDZ | .004 | .010 | .016 | .E..GDZ | ||||||||||||
| .S..GDZ | .004 | .010 | .016 | .S..GDZ | ||||||||||||
| .E..HPZ | .004 | .010 | .016 | .E..HPZ | ||||||||||||
| .S..HPZ | .004 | .010 | .016 | .S..HPZ | ||||||||||||
| Grupo de materiales | KC522M | KC725M | KCPK30 | KCSM30 | |||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 160 | 120 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 205 | 180 | 165 | – | – | – | – | – | – |
| 2 | 225 | 190 | 160 | 185 | 160 | 130 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 140 | 120 | 95 | – | – | – | – | – | – | |
| K | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 50 | 45 | 35 | 35 | 30 | – | – | – | – | – | – | – |
| 2 | 50 | 45 | 35 | 30 | 30 | – | – | – | – | – | – | – | |
| 3 | 60 | 50 | 35 | 40 | 40 | – | – | – | – | – | – | – | |
| 4 | 85 | 60 | 45 | 50 | 45 | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC410M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | |
| 4 | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | |
| K | 1 | – | – | – | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 355 | 320 | 285 |
| 2 | – | – | – | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 280 | 255 | 230 | |
| 3 | – | – | – | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 235 | 210 | 195 | |
| N | 1–2 | 1460 | 1300 | 1195 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC410M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | |
| 4 | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | |
| K | 1 | – | – | – | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 355 | 320 | 285 |
| 2 | – | – | – | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 280 | 255 | 230 | |
| 3 | – | – | – | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 235 | 210 | 195 | |
| N | 1–2 | 1460 | 1300 | 1195 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC410M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | |
| K | 1 | 510 | 480 | 450 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
| 2 | 450 | 420 | 390 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 920 | 830 | 760 | |
| 3 | 400 | 350 | 310 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 770 | 690 | 640 | |
| N | 1–2 | 1980 | 1860 | 1770 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1620 | 1440 | 1260 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC410M | KC522M | KC725M | KCPM20 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | |
| K | 1 | 510 | 480 | 450 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 1160 | 1050 | 940 |
| 2 | 450 | 420 | 390 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 920 | 830 | 760 | |
| 3 | 400 | 350 | 310 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 770 | 690 | 640 | |
| N | 1–2 | 1980 | 1860 | 1770 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1620 | 1440 | 1260 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
| P1 | ||||||
| P3 | ||||||
| P5 | .S..GDZ | KCPK30 | .E..HPZ | KCPM20 | .S..HPZ | KCPM20 |
| M1 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KCPK30 |
| M3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| K1 | ||||||
| K3 | ||||||
| N1 | ||||||
| N3 | ||||||
| S1 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC522M |
| S3 | .S..GDZ | KC725M | .E..HPZ | KC725M | .S..HPZ | KC725M |
| S4 | .E..HPZ | KC725M | .S..HPZ | KC725M | ||
| H1 | ||||||
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| P3–P4 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| P5–P6 | .S..GDZ | KCPK30 | – | – | – | – |
| M1–M2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| M3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| K1–K2 | .E..GDZ | KCPK30 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 |
| K3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| N1–N2 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| S3 | .S..GDZ | KC725M | .E..HPZ | KC725M | .S..HPZ | KC725M |
| S4 | .E..HPZ | KC725M | .S..HPZ | KC725M | – | – |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| (Geometría ligera) | (Geometría fuerte) | |||||
| resistencia | | tenacidad | ||||
| Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
| P1–P2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| P3–P4 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| P5–P6 | .S..GDZ | KCPK30 | – | – | – | – |
| M1–M2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| M3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| K1–K2 | .E..GDZ | KCPK30 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 |
| K3 | .S..GDZ | KCPK30 | .E..HPZ | KCPK30 | .S..HPZ | KCPK30 |
| N1–N2 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..GDZ | KC725M | .S..GDZ | KC725M | .E..HPZ | KC725M |
| S3 | .S..GDZ | KC725M | .E..HPZ | KC725M | .S..HPZ | KC725M |
| S4 | .E..HPZ | KC725M | .S..HPZ | KC725M | – | – |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?