Top Notch™ Grooving Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (113)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(113)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(113)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(113)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(113)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(113)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(113)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(113)
- M Stainless Steel (113)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(113)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(113)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(113)
- K Cast Iron (113)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(113)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(113)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(113)
- N Non-Ferrous Materials (114)
- N1Wrought Aluminum (114)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(113)
- N3High-Silicon Aluminum Alloys Si >12.2%(46)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (114)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (113)
- N6Carbon, Graphite Composites, CFRP (113)
- S High-Temp Alloys (114)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(114)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(114)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(114)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(114)
- H Hardened Materials (111)
- H1Hardened Materials 44-48 HRC(111)
- H2Hardened Materials 48-55 HRC(76)
- H3Hardened Materials 56-60 HRC(71)
- H4Hardened Materials >60 HRC(71)
Applications
Applications
Face Grooving (114)
Grooving (114)
OD Thread Turning (114)
Type of Thread
Type of Thread
- 60 (106)
- ACME (76)
- API (71)
- API RD (48)
- BSW (46)
- BUTTRESS (106)
- M (25)
- NPT (46)
- STUB ACME (46)
- UN (106)
- UNJ (46)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (110)
- Lightly Interrupted Cut (110)
- Smooth Cut (111)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (13)
- 90.0 (101)
to
Connection Style
Connection Style
- Toolholder (77)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (106)
- 2.0 (114)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 63.5 mm(4)
- 70.0 mm(2)
- 80.0 mm(2)
- 88.9 mm(4)
- 100.0 mm(4)
- 101.6 mm(3)
- 114.3 mm(12)
- 125.0 mm(8)
- 127.0 mm(16)
- 150.0 mm(14)
- 152.4 mm(32)
- 170.0 mm(11)
- 177.8 mm(2)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.025 mm(25)
- 0.05 mm(25)
- 0.075 mm(106)
- 0.1 mm(81)
- 0.125 mm(46)
- 0.15 mm(71)
- 0.175 mm(90)
- 0.2 mm(106)
- 0.225 mm(46)
- 0.25 mm(90)
- 0.275 mm(25)
- 0.3 mm(46)
- 0.325 mm(71)
- 0.35 mm(90)
- 0.4 mm(48)
- 0.45 mm(59)
- 0.475 mm(25)
- 0.5 mm(81)
- 0.575 mm(72)
- 0.75 mm(19)
- 0.775 mm(81)
- 0.825 mm(4)
- 0.9 mm(71)
- 1.0 mm(81)
- 1.2 mm(81)
- 1.25 mm(19)
- 1.5 mm(81)
- 1.575 mm(46)
- 1.6 mm(106)
- 1.75 mm(19)
- 1.975 mm(46)
- 2.0 mm(46)
- 2.4 mm(71)
- 2.5 mm(12)
- 3.175 mm(25)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (106)
- K420 (107)
- K68 (114)
- KB1630 (71)
- KBH20 (25)
- KC5010 (111)
- KC5025 (113)
- KC5410 (60)
- KC720 (106)
- KC730 (106)
- KC850 (106)
- KC9110 (12)
- KCK20 (87)
- KCK20B (106)
- KCP10B (106)
- KCP25B (106)
- KCP25C (106)
- KCU10 (108)
- KCU10B (111)
- KCU25 (113)
- KCU25B (113)
- KD1425 (46)
- KT315 (77)
Hand Of Tool
Hand Of Tool
- L (34)
- R (43)
F Dimension
F Dimension
- 14.0 mm(2)
- 14.275 mm(2)
- 16.0 mm(2)
- 19.05 mm(2)
- 20.0 mm(2)
- 22.225 mm(1)
- 25.0 mm(6)
- 25.4 mm(9)
- 31.75 mm(19)
- 32.0 mm(12)
- 38.1 mm(12)
- 40.0 mm(4)
- 50.8 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(75)
- 38.1 mm(4)
- 41.3 mm(34)
- 47.6 mm(34)
- 55.88 mm(3)
- 56.625 mm(21)
- 57.2 mm(15)
- 60.325 mm(2)
- 63.5 mm(18)
- 76.2 mm(4)
- 88.9 mm(57)
- 127.0 mm(1)
- 139.7 mm(34)
- 146.05 mm(3)
- 174.6 mm(34)
- 209.6 mm(17)
- 222.3 mm(15)
- 333.0 mm(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(111)
to
Cutting Direction
Cutting Direction
- E (67)
- S (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (77)
Maximum Bore Depth
Maximum Bore Depth
- 25.4 mm(10)
- 50.8 mm(23)
to
Front-End
Cutting Width
Cutting Width
- 0.5 mm(35)
- 0.787 mm(35)
- 0.8 mm(35)
- 0.889 mm(19)
- 0.991 mm(35)
- 1.0 mm(81)
- 1.041 mm(35)
- 1.19 mm(56)
- 1.194 mm(81)
- 1.2 mm(81)
- 1.39 mm(35)
- 1.397 mm(19)
- 1.4 mm(35)
- 1.473 mm(35)
- 1.5 mm(81)
- 1.57 mm(62)
- 1.575 mm(81)
- 1.69 mm(19)
- 1.7 mm(35)
- 1.702 mm(35)
- 1.75 mm(81)
- 1.829 mm(46)
- 1.94 mm(16)
- 1.95 mm(35)
- 1.956 mm(16)
- 1.981 mm(46)
- 2.0 mm(81)
- 2.007 mm(35)
- 2.2 mm(81)
- 2.235 mm(65)
- 2.236 mm(25)
- 2.24 mm(35)
- 2.25 mm(56)
- 2.387 mm(25)
- 2.388 mm(81)
- 2.39 mm(21)
- 2.464 mm(46)
- 2.5 mm(81)
- 2.667 mm(46)
- 2.74 mm(16)
- 2.743 mm(19)
- 2.75 mm(81)
- 2.794 mm(46)
- 2.997 mm(65)
- 3.0 mm(106)
- 3.099 mm(46)
- 3.17 mm(46)
- 3.175 mm(106)
- 3.18 mm(28)
- 3.2 mm(77)
- 3.245 mm(35)
- 3.25 mm(46)
- 3.251 mm(25)
- 3.27 mm(16)
- 3.32 mm(25)
- 3.5 mm(90)
- 3.607 mm(46)
- 3.81 mm(19)
- 3.82 mm(19)
- 3.835 mm(19)
- 3.84 mm(35)
- 3.96 mm(46)
- 3.962 mm(46)
- 3.974 mm(25)
- 3.988 mm(46)
- 4.0 mm(71)
- 4.242 mm(25)
- 4.25 mm(46)
- 4.5 mm(71)
- 4.521 mm(46)
- 4.699 mm(46)
- 4.775 mm(71)
- 4.78 mm(13)
- 4.785 mm(13)
- 4.788 mm(12)
- 4.8 mm(46)
- 4.801 mm(71)
- 4.88 mm(25)
- 4.95 mm(46)
- 4.953 mm(25)
- 4.978 mm(46)
- 5.0 mm(25)
- 5.004 mm(12)
- 5.41 mm(25)
- 5.5 mm(25)
- 6.0 mm(25)
- 6.35 mm(26)
- 6.36 mm(12)
- 6.502 mm(25)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(2)
- 9.677 mm(3)
- 9.754 mm(5)
to
Insert Size
Insert Size
- 2 (16)
- 3 (17)
- 4 (8)
Maximum Cutting Depth
Maximum Cutting Depth
- 3.3 mm(1)
- 3.505 mm(17)
- 3.51 mm(17)
- 5.33 mm(14)
- 5.334 mm(19)
- 6.35 mm(2)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.484 mm(4)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (71)
- B L (25)
- D P (46)
- H T (77)
- H W (114)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (77)
Shank Height
Shank Height
- 9.525 mm(2)
- 10.0 mm(2)
- 12.0 mm(2)
- 12.7 mm(2)
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(10)
- 20.0 mm(6)
- 25.0 mm(8)
- 25.4 mm(18)
- 31.75 mm(12)
- 32.0 mm(8)
- 38.1 mm(4)
to
Shank Width
Shank Width
- 9.525 mm(2)
- 10.0 mm(2)
- 12.0 mm(2)
- 12.7 mm(2)
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(10)
- 20.0 mm(6)
- 25.0 mm(12)
- 25.4 mm(18)
- 31.75 mm(12)
- 32.0 mm(4)
- 38.1 mm(4)
to
No filters matching ""
