SE Four-Margin Drill • Coolant • Steel
The SE solid carbide drills are enhanced with superior chip evacuation ensuring long tool life and consistent performance. In applications demanding high accuracy, consistent hole straightness, and excellent metal removal rates, such as in connecting rods (conrods), our application-specific SC drill for mid-L/D applications excels. Featuring an SE drill point design with a sculptured edge, these drills enable high feed rates. Moreover, our multi-layer grades allow for higher cutting speeds ensuring efficient steel machining operations.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (31)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(31)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(31)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(31)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(31)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(31)
- K Cast Iron (31)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(31)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(31)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(31)
Applications
Applications
Cross Hole Drilling (31)
Drilling (31)
Inclined Exit Drilling (31)
Stacked Plates Drilling (31)
Cutting Diameter
Cutting Diameter
- 4.3 mm(1)
- 5.0 mm(1)
- 5.1 mm(1)
- 5.5 mm(1)
- 5.8 mm(1)
- 6.0 mm(1)
- 6.5 mm(1)
- 6.8 mm(1)
- 7.0 mm(1)
- 7.8 mm(1)
- 8.0 mm(1)
- 8.4 mm(1)
- 8.5 mm(1)
- 8.8 mm(1)
- 9.0 mm(2)
- 9.5 mm(1)
- 9.55 mm(1)
- 9.8 mm(1)
- 10.0 mm(1)
- 10.2 mm(1)
- 10.5 mm(1)
- 11.0 mm(1)
- 11.8 mm(1)
- 12.0 mm(1)
- 12.5 mm(1)
- 13.0 mm(1)
- 13.5 mm(1)
- 14.0 mm(1)
- 15.0 mm(1)
- 16.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 41.0 mm(1)
- 48.0 mm(5)
- 57.0 mm(3)
- 64.0 mm(2)
- 80.0 mm(9)
- 96.0 mm(5)
- 112.0 mm(4)
- 128.0 mm(2)
to
Reach
Reach
- 49.0 mm(1)
- 56.0 mm(5)
- 67.0 mm(3)
- 74.0 mm(2)
- 92.0 mm(9)
- 110.0 mm(5)
- 128.0 mm(4)
- 146.0 mm(2)
to
Over All Length [L]
Over All Length [L]
- 87.0 mm(1)
- 94.0 mm(5)
- 105.0 mm(3)
- 113.0 mm(2)
- 135.0 mm(9)
- 158.0 mm(5)
- 176.0 mm(4)
- 197.0 mm(2)
to
Application
Coating
Coating
- TiAlN (1)
- TiN/TiAlN (22)
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7315 (1)
- KCU15A (30)
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(6)
- 8.0 mm(5)
- 10.0 mm(9)
- 12.0 mm(5)
- 14.0 mm(4)
- 16.0 mm(2)
to
No filters matching ""
