successfully added to cart
View Cart


Mark all as read

Lepsza wydajność

Use Case

  • Obrabiarka: Wirtgen W210i (2180h)
  • Engine Power: 283 + 231 kW
  • Line Spacing: 25mm (Eco Cutter Drum)
  • Width of drum: 2000mm
  • Uchwyty HT22 (almost new, good condition)
  • Holders on drum: 100
  • Belt condition: Dobrze
  • Track pad condition: Średnie

Total Cutting Performance

  • Total m²: 19.283 m² 
  • Total m³: 1.353 m³
  • Total tons: 3.247 tons (density: 2400kg/m³)
  • Total fuel (PCD): 830l + 467l = 1297l
  • Total fuel (Carbide): 834l + 500l = 1334l

Use Case

  • Obrabiarka: Wirtgen W210XP
  • Holder System: HT22 (new)
  • Szerokość skrawania 2,2 mm
  • Line Spacing: 10mm
  • Materiał: Asphalt (medium hard)
  • Cutting Depth: 2 – 6cm
  • Velocity: Varying up to 30m/min

Total Cutting Performance

  • Total square meter: 77,000
  • Cutting depth average: 4cm
  • Total cubic meters: 3,080

Road King Xtreme vs. a conventional tool body after 20,000m2 of asphalt

Use Case

  • Obrabiarka: Wirtgen W150 CFI
  • Holder System: HT22 (new)
  • Szerokość skrawania 2,2 mm
  • Line Spacing: 18mm
  • Materiał: Asphalt (very hard)
  • Głębokość skrawania apróżne aż do 0,0197
  • Velocity: Varying up to 25m/minn

Total Cutting Performance

  • Time in use: 65h
  • Total tons: 5,802
  • Total square meters: 28,372
  • Total cubic meters: 2,321
  • Depending on application this equals approx. 11 sets of conventional carbide tools

Balanced wear on all units after milling more than 65 hours

Use Case

  • Obrabiarka: Wirtgen 2200
  • Szerokość skrawania 2,2 mm
  • Materiał: Asphalt (high proportion of quartz)
  • Głębokość skrawania (ap)
  • Velocity: 20m/min
  • Fuel Consumption: 235 liters / 4h

Total Cutting Performance

  • In this case, conventional tools are changed three times per shift. Each change takes roughly 20 minutes. 
  • Time needed with conventional tools: 4.0 Hours
  • Time needed with Road King Xtreme: 2.5 Hours
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart