successfully added to cart
View Cart
Płytki z chwytem gwintowanym
Płytki z chwytem gwintowanym
Płytki z chwytem gwintowanym
Płytki z chwytem gwintowanym

CCMT-UF

Płytki z chwytem gwintowanym

Features and benefits



  • Geometria do obróbki wykańczającej stosowana w wielu grupach materiałowych.

  • Z uwzględnieniem gatunków Beyond™ Drive™.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (11)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (11)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (11)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (11)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (11)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (11)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (11)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
Cutting Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (10)
  • Varying Depth of Cut (6)
Cutting Condition Material
  • K-All (4)
  • M-All (4)
  • P-All (6)
cornerConfiguration
Corner Radius
  • 0.2 (2)
  • 0.4 (7)
  • 0.8 (2)
to
Corner Radius
  • 0.008 (2)
  • 0.0156 (7)
  • 0.0313 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (2)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (10)
  • Varying Depth of Cut (6)
Drilling Condition Material
  • K-All (4)
  • M-All (4)
  • P-All (6)
Grade Of Cutting Tool
  • KC5010 (4)
  • KC730 (1)
  • KCP05 (2)
  • KCP10 (1)
  • KCP10B (1)
  • KCP25 (1)
  • KCP25B (1)
insertGeometry
Insert IC Size
  • 0.25 (4)
  • 0.375 (7)
to
Insert IC Size
  • 6.35 (4)
  • 9.525 (7)
to
Cutting Edge Length
  • 0.2539 (4)
  • 0.3808 (7)
to
Cutting Edge Length
  • 6.448 (4)
  • 9.672 (7)
to
other
Grade
  • KC5010 (4)
  • KC730 (1)
  • KCP05 (2)
  • KCP10 (1)
  • KCP10B (1)
  • KCP25 (1)
  • KCP25B (1)
Platform
  • ModBORE (4)
  • Screw-On (6)
Tool Unit
  • I (11)
  • M (11)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 11 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1871163 CCMT060204UF CCMT2151UF KC5010 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.4000 .0156 2.8000 .1100
    List price:
    $18.74 /each.
    Your price::
    Qty
    1871164 CCMT09T302UF CCMT32505UF KC5010 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.2000 .0080 4.4000 .1732
      List price:
      $21.87 /each.
      Your price::
      Qty
      1871165 CCMT09T304UF CCMT3251UF KC5010 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.4000 .0156 4.4000 .1732
        List price:
        $21.87 /each.
        Your price::
        Qty
        1871166 CCMT09T308UF CCMT3252UF KC5010 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.8000 .0312 4.4000 .1732
          List price:
          $21.87 /each.
          Your price::
          Qty
          1161831 CCMT09T304UF CCMT3251UF KC730 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.4000 .0156 4.4000 .1732
            List price:
            $21.87 /each.
            Your price::
            Qty
            3746125 CCMT060204UF CCMT2151UF KCP05 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.4000 .0156 2.8000 .1100
              List price:
              $18.74 /each.
              Your price::
              Qty
              3746126 CCMT09T302UF CCMT32505UF KCP05 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.2000 .0080 4.4000 .1732
                List price:
                $21.87 /each.
                Your price::
                Qty
                3749298 CCMT060204UF CCMT2151UF KCP10 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.4000 .0156 2.8000 .1100
                  List price:
                  $18.74 /each.
                  Your price::
                  Qty
                  3751703 CCMT09T304UF CCMT3251UF KCP25 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.4000 .0156 4.4000 .1732
                    List price:
                    $21.87 /each.
                    Your price::
                    Qty
                    5694056 CCMT060204UF CCMT2151UF KCP25B 6.3500 .2500 6.4480 .2539 2.3810 .0938 0.4000 .0156 2.8000 .1100
                      List price:
                      $18.74 /each.
                      Your price::
                      Qty
                      5697914 CCMT09T308UF CCMT3252UF KCP10B 9.5250 .3750 9.6720 .3808 3.9690 .1563 0.8000 .0312 4.4000 .1732
                        List price:
                        $21.87 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        Grades

                        • K313

                          Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
                          Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

                          N Non-Ferrous
                          S High-Temp Alloys
                        • KC5010

                          Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
                          Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

                          P Steel
                          M Stainless Steel
                          S High-Temp Alloys
                        • KCP05

                          Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
                          Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

                          P Steel
                          K Cast Iron
                        • KCP05B

                          Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3-TiOCN coating.

                          Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

                          P Steel
                          K Cast Iron
                        • KCP10

                          Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                          Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                          P Steel
                          K Cast Iron
                        • KCP10B

                          Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                          Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                          P Steel
                          K Cast Iron
                        • KCP25

                          Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
                          Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                          P Steel
                          K Cast Iron
                        • KCP25B

                          Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                          Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                          P Steel
                          K Cast Iron
                        product-image
                        Please adjust the following properties from

                        ISO Catalog Number

                        ANSI Catalog Number

                        to find similar products.
                        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        We have found the following CAD Drawings

                        Select the files you are looking for and download them all at once

                        You should be logged to see your dashboard information
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart