successfully added to cart
View Cart
Płytki Kenloc™
Płytki Kenloc™
Płytki Kenloc™
Płytki Kenloc™

CNMG-FF

Płytki Kenloc™

Features and benefits



  • Geometria do obróbki wykańczającej w zastosowaniach wymagających zapewnienia wysokiej jakości powierzchni obrobionej.

  • Z uwzględnieniem gatunków Beyond™ Drive™.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • ID Thread Turning ID Thread Turning (1)
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (12)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
Cutting Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (12)
  • Varying Depth of Cut (4)
Cutting Condition Material
  • M-All (7)
  • P-All (7)
Cutting Edges Per Insert
  • 4.0 (2)
  • 8.0 (10)
to
cornerConfiguration
Corner Radius
  • 0.4 (7)
  • 0.8 (5)
to
Corner Radius
  • 0.0156 (7)
  • 0.0313 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (12)
  • Varying Depth of Cut (4)
Drilling Condition Material
  • M-All (7)
  • P-All (7)
Grade Of Cutting Tool
  • KC5010 (3)
  • KCP05 (2)
  • KCP10 (1)
  • KCP10B (2)
  • KCU10 (2)
  • KT315 (2)
insertGeometry
Insert IC Size
  • 0.375 (2)
  • 0.5 (10)
to
Insert IC Size
  • 9.525 (2)
  • 12.7 (10)
to
Cutting Edge Length
  • 0.3808 (2)
  • 0.5077 (10)
to
Cutting Edge Length
  • 9.672 (2)
  • 12.896 (10)
to
Cutting Tool Material
  • H T (2)
  • H W (10)
other
Grade
  • KC5010 (3)
  • KCP05 (2)
  • KCP10 (1)
  • KCP10B (2)
  • KCU10 (2)
  • KT315 (2)
Tool Unit
  • I (12)
  • M (12)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 12 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1601557 CNMG120404FF CNMG431FF KC5010 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
    List price:
    $18.73 /each.
    Your price::
    Qty
    1601631 CNMG120404FF CNMG431FF KT315 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
      List price:
      $16.30 /each.
      Your price::
      Qty
      1601636 CNMG120408FF CNMG432FF KT315 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
        List price:
        $16.30 /each.
        Your price::
        Qty
        1624156 CNMG090304FF CNMG321FF KC5010 9.5250 .3750 9.6720 .3808 3.1800 .1250 0.4000 .0156 3.8100 .1500
          List price:
          $14.15 /each.
          Your price::
          Qty
          1624159 CNMG090308FF CNMG322FF KC5010 9.5250 .3750 9.6720 .3808 3.1800 .1250 0.8000 .0312 3.8100 .1500
            List price:
            $14.15 /each.
            Your price::
            Qty
            3748366 CNMG120404FF CNMG431FF KCP05 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
              List price:
              $18.73 /each.
              Your price::
              Qty
              3748367 CNMG120408FF CNMG432FF KCP05 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
                List price:
                $18.73 /each.
                Your price::
                Qty
                3749347 CNMG120404FF CNMG431FF KCP10 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                  List price:
                  $18.73 /each.
                  Your price::
                  Qty
                  4050677 CNMG120404FF CNMG431FF KCU10 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                    List price:
                    $18.73 /each.
                    Your price::
                    Qty
                    4050684 CNMG120408FF CNMG432FF KCU10 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
                      List price:
                      $18.73 /each.
                      Your price::
                      Qty
                      5534828 CNMG120404FF CNMG431FF KCP10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.4000 .0156 5.1600 .2031
                        List price:
                        $18.73 /each.
                        Your price::
                        Qty
                        5535022 CNMG120408FF CNMG432FF KCP10B 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
                          List price:
                          $18.73 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          Grades

                          • KC5010

                            Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
                            Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

                            P Steel
                            M Stainless Steel
                            S High-Temp Alloys
                          • KC9215
                          • KCM15B

                            Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.

                            Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

                            P Steel
                            M Stainless Steel
                            S High-Temp Alloys
                          • KCP05

                            Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
                            Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

                            P Steel
                            K Cast Iron
                          • KCP10

                            Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                            Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                            P Steel
                            K Cast Iron
                          • KCP10B

                            Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                            Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                            P Steel
                            K Cast Iron
                          • KCP25B

                            Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                            Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                            P Steel
                            K Cast Iron
                          • KCU10

                            Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
                            Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                            P Steel
                            M Stainless Steel
                            S High-Temp Alloys
                          • KT315

                            Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
                            Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

                            P Steel
                            M Stainless Steel
                            K Cast Iron
                          product-image
                          Please adjust the following properties from

                          ISO Catalog Number

                          ANSI Catalog Number

                          to find similar products.
                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart