No Items in Cart
Sign In
Loading Profile
Polski
COVID-19: Jak reaguje Kennametal
Płytki Top Notch™ do obróbki rowków i toczenia
Płytki Top Notch™ do obróbki rowków i toczenia
Płytki Top Notch™ do obróbki rowków i toczenia
Płytki Top Notch™ do obróbki rowków i toczenia

Obróbka rowków i przecinanie

Płytki Top Notch™ do obróbki rowków i toczenia

Workpiece Material

P
S
H
K
M
N
Displaying 1-10 of 42 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [W] Cutting Width [W] Cutting Width [RC] Corner Radius Center [RC] Corner Radius Center [T] Cuttg Depth [T] Cutting Depth
4175969 NRP3031L NRP3031L KCU10 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
1114469 NRP3031R NRP3031R K313 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
2599510 NRP3031R NRP3031R KC5010 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
4175970 NRP3031R NRP3031R KCU10 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
1818448 NRP3047L NRP3047L KC5410 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
2599513 NRP3047L NRP3047L KC5010 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
4175971 NRP3047L NRP3047L KCU10 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
1818449 NRP3047R NRP3047R KC5410 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
2599512 NRP3047R NRP3047R KC5010 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
4175972 NRP3047R NRP3047R KCU10 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
1775697 NRP3062L NRP3062L KC5410 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
2599515 NRP3062L NRP3062L KC5010 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
4175974 NRP3062L NRP3062L KCU10 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
1818450 NRP3062R NRP3062R KC5410 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
1818463 NRP3094L NRP3094L KC5410 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
2599518 NRP3094L NRP3094L KC5010 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
4175977 NRP3094R NRP3094R KCU10 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
1818571 NRP4094R NRP4094R KC5410 4 4.7750 .1880 2.3880 .0940 6.3500 .2500
1818873 NRP4125R NRP4125R KC5410 4 6.3500 .2500 3.1750 .1250 6.3500 .2500
1114473 NRP3031L NRP3031L K313 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
1114635 NRP3031L NRP3031L K68 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
2599511 NRP3031L NRP3031L KC5010 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
1114630 NRP3031R NRP3031R K68 3 1.5750 .0620 0.7870 .0310 2.3880 .0940
1114636 NRP3047L NRP3047L K68 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
1114470 NRP3047R NRP3047R K313 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
1114631 NRP3047R NRP3047R K68 3 2.3880 .0940 1.1940 .0470 3.8100 .1500
1114637 NRP3062L NRP3062L K68 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
1114632 NRP3062R NRP3062R K68 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
2599514 NRP3062R NRP3062R KC5010 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
4175975 NRP3062R NRP3062R KCU10 3 3.1750 .1250 1.5880 .0625 3.8100 .1500
1818451 NRP3078L NRP3078L KC5410 3 3.9620 .1560 1.9810 .0780 3.8100 .1500
1114633 NRP3078R NRP3078R K68 3 3.9620 .1560 1.9810 .0780 3.8100 .1500
1818452 NRP3078R NRP3078R KC5410 3 3.9620 .1560 1.9810 .0780 3.8100 .1500
4175976 NRP3094L NRP3094L KCU10 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
1114634 NRP3094R NRP3094R K68 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
2599516 NRP3094R NRP3094R KC5010 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
1818464 NRP3094R NRP3094R KC5410 3 4.7750 .1880 2.3880 .0940 3.8100 .1500
1818569 NRP4062L NRP4062L KC5410 4 3.1750 .1250 1.5880 .0625 3.8100 .1500
1818570 NRP4094L NRP4094L KC5410 4 4.7750 .1880 2.3880 .0940 6.3500 .2500
1114643 NRP4125L NRP4125L K68 4 6.3500 .2500 3.1750 .1250 6.3500 .2500
1818572 NRP4125L NRP4125L KC5410 4 6.3500 .2500 3.1750 .1250 6.3500 .2500
1114640 NRP4125R NRP4125R K68 4 6.3500 .2500 3.1750 .1250 6.3500 .2500
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (42)
    • N1
      Wrought Aluminum
      (42)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (29)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (42)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (29)
    • N6
      Carbon, Graphite Composites, CFRP
      (29)
  • S High-Temp Alloys (29)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (29)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (29)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (29)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (29)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (8)
Applications
  • Back Boring (22)
  • Boring (22)
  • Cut-Off (22)
  • Face Grooving (22)
  • Facing (22)
  • Grooving (22)
  • ID Facing (22)
  • ID Grooving (22)
  • ID Thread Turning (22)
  • OD Thread Turning (22)
  • Plunge Turning (22)
  • Profiling (22)
  • Turning (22)
Cutting Condition
  • Smooth Cut (23)
  • Varying Depth of Cut (23)
  • Heavily Interrupted Cut (16)
  • Lightly Interrupted Cut (16)
Cutting Edges Per Insert
to
cornerConfiguration
Corner Radius
to
Corner Radius
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Smooth Cut (23)
  • Varying Depth of Cut (23)
  • Heavily Interrupted Cut (16)
  • Lightly Interrupted Cut (16)
Grade Of Cutting Tool
  • KC5410 (13)
  • K68 (10)
  • KC5010 (8)
  • KCU10 (8)
  • K313 (3)
Wiper Insert
  • N (42)
Minimum Axial Groove Diameter
to
Minimum Axial Groove Diameter
to
Maximum Axial Groove Diameter
to
Maximum Axial Groove Diameter
to
frontEnd
Cutting Width
to
Cutting Width
to
Insert Shape
  • TN-TOP NOTCH (42)
insertGeometry
Shape
  • TN-TOP NOTCH (42)
Insert Seat Size
  • 3 (35)
  • 4 (7)
Cutting Tool Material
  • H W (42)
Insert Thickness
to
Insert Thickness
to
other
Grade
  • KC5410 (13)
  • K68 (10)
  • KC5010 (8)
  • KCU10 (8)
  • K313 (3)
Platform
  • Top Notch (21)
Tool Unit
  • I (42)
  • M (42)
Drilling Condition Material
  • N-All (23)
  • S-All (23)
  • H-All (16)
  • K-All (16)
  • M-All (16)
  • P-All (16)
Cutting Condition Material
  • N-All (23)
  • S-All (23)
  • H-All (16)
  • K-All (16)
  • M-All (16)
  • P-All (16)
Insert Hand
  • R (22)
  • L (20)
No filters matching ""

Grades

  • K313

    Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
    Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

    S
    N
  • K68

    Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
    Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

    S
    N
  • KC5010

    Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
    Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

    P
    S
    H
    K
    M
    N
  • KC5410

    Composition: A PVD TiB2 coating over a very deformation-resistant unalloyed substrate.
    Application: Designed for roughing, semi-finishing, and finishing of free machining (hypoeutectic <12,2% Si) aluminium, aluminium alloys, and magnesium alloys. The TiB2 coating is harder than TiN and TiAlN coatings and has an extremely smooth surface, resulting in reduced surface friction, speedy chip flow, and outstanding wear resistance. Built-up edge is prevented because this coating has a very low affinity for aluminium. The substrate is unalloyed and fine grained and offers sharp edges, smooth surfaces, and excellent thermal deformation resistance and edge integrity. Inserts with a ground periphery are polished before coating and have a sharp edge. Moulded inserts have a light hone.

    N
  • KCU10

    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
    Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

    P
    S
    H
    K
    M
    N