No Items in Cart
Sign In
Loading Profile
Polski
COVID-19: Jak reaguje Kennametal
Płytki wymienne • SNHX-NGP
Płytki wymienne • SNHX-NGP
Płytki wymienne • SNHX-NGP
Płytki wymienne • SNHX-NGP

Frezy do rowków 90° SN

Płytki wymienne • SNHX-NGP

Features and benefits

  • Cztery krawędzie skrawające.

  • Możliwość stosowania dużych wartości posuwu do 55 HRC.

Workpiece Material

P
S
K
M
N
Displaying 1-10 of 53 results
Select Columns
ColumnsX
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length Average Chip Thickness [HM] Average Chip Thickness [HM] Cutting Edges per Insert
1213748 5104040379E 5104040379E CF2 11.000 .4330 2.700 .1063 2.700 .1063     4
1198148 5104040381E 5104040381E GX 12.700 .5000 5.400 .2126 5.400 .2126 0.080 .0030 4
1198150 5104040428E 5104040428E KC930M 11.000 .4330 2.300 .0906 2.300 .0906     4
1198153 5104040429E 5104040429E KC930M 11.000 .4330 2.700 .1063 2.700 .1063     4
2227116 5104040430E 5104040430E KCPK30 12.700 .5000 3.200 .1260 3.200 .1260 0.080 .0030 4
1198155 5104040431E 5104040431E KC930M 12.700 .5000 5.400 .2126 5.400 .2126     4
5577129 SNHX1102PZTNGP *DO NOT USE* SNHX1102PZTNGP *DO NOT USE* KCPM40                  
5577128 SNHX11T3PZTNGP *DO NOT USE* SNHX11T3PZTNGP *DO NOT USE* KCPM40                  
1191345 SNHX1102PZTNGP SNHX1102PZTNGP KC930M 11.000 .4330 2.300 .0906 11.000 .4331     4
5586061 SNHX1102PZTNGP SNHX1102PZTNGP KCPM40 11.0000 .4330 2.3000 .0906 11.0000 .4331 0.1400 .0055 4
2227146 SNHX11T3PZTNGP SNHX11T3PZTNGP KC935M 11.000 .4330 2.700 .1060 11.000 .4330     4
1198113 SNHX11T3PZTNGP SNHX11T3PZTNGP K110M 11.000 .4330 2.700 .1060 11.000 .4330     4
1864819 SNHX11T3PZTNGP SNHX11T3PZTNGP KC920M 11.000 .4330 2.700 .1060 11.000 .4330     4
5586060 SNHX11T3PZTNGP SNHX11T3PZTNGP KCPM40 11.0000 .4330 2.7000 .1060 11.0000 .4330 0.1400 .0055 4
2227147 SNHX1203PZTNGP SNHX1203PZTNGP KCPK30 12.7000 .5000 3.2000 .1260 12.7000 .5000 0.1400 .0055 4
1191347 SNHX1203PZTNGP SNHX1203PZTNGP K110M 12.7000 .5000 3.2000 .1260 12.7000 .5000 0.1400 .0055 4
1198152 SNHX1203PZTNGP SNHX1203PZTNGP KC930M 12.700 .5000 3.200 .1260 12.700 .5000 0.140 .0055 4
1864817 SNHX1203PZTNGP SNHX1203PZTNGP KC725M 12.7000 .5000 3.2000 .1260 12.7000 .5000 0.1400 .0055 4
2227148 SNHX1204PZTNGP SNHX1204PZTNGP KC935M 12.700 .5000 4.000 .1575 12.700 .5000     4
1191348 SNHX12L5PZTNGP SNHX12L5PZTNGP KC930M 12.700 .5000 5.400 .2126 12.700 .5000     4
1198114 SNHX12L5PZTNGP SNHX12L5PZTNGP K110M 12.7000 .5000 5.4000 .2126 12.7000 .5000 0.1400 .0055 4
1198145 SNHX12L5PZTNGP SNHX12L5PZTNGP K125M 12.700 .5000 5.400 .2126 12.700 .5000     4
1864825 SNHX12L5PZTNGP SNHX12L5PZTNGP KC725M 12.7000 .5000 5.4000 .2126 12.7000 .5000 0.1400 .0055 4
1864827 SNHX12L5PZTNGP SNHX12L5PZTNGP KC925M 12.700 .5000 5.400 .2126 12.700 .5000     4
1198149 5104040378E 5104040378E GX 11.000 .4330 2.300 .0906 2.300 .0906     4
1198146 5104040379E 5104040379E GX 11.000 .4330 2.700 .1063 2.700 .1063     4
1198147 5104040380E 5104040380E GX 12.700 .5000 3.200 .1260 3.200 .1260     4
2227114 5104040428E 5104040428E KC935M 11.000 .4330 2.300 .0906 2.300 .0906     4
2227115 5104040429E 5104040429E KC935M 11.000 .4330 2.700 .1063 2.700 .1063     4
1198141 5104040430E 5104040430E PVA 12.700 .5000 3.200 .1260 3.200 .1260     4
1198154 5104040430E 5104040430E KC930M 12.700 .5000 3.200 .1260 3.200 .1260     4
1198140 5104040431E 5104040431E PVA 12.700 .5000 5.400 .2126 5.400 .2126     4
2249723 5104040431E 5104040431E KCPK30 12.700 .5000 5.400 .2126 5.400 .2126 0.080 .0030 4
5577140 SNHX1203PZTNGP *DO NOT USE* SNHX1203PZTNGP *DO NOT USE* KCPM40                  
1191346 SNHX1102PZTNGP SNHX1102PZTNGP K110M 11.0000 .4330 2.3000 .0906 11.0000 .4331 0.1400 .0055 4
1198142 SNHX1102PZTNGP SNHX1102PZTNGP K125M 11.000 .4330 2.300 .0906 11.000 .4331     4
1864622 SNHX1102PZTNGP SNHX1102PZTNGP KC735M 11.000 .4330 2.300 .0906 11.000 .4331 0.140 .0055 4
1864815 SNHX1102PZTNGP SNHX1102PZTNGP KC725M 11.0000 .4330 2.3000 .0906 11.0000 .4331 0.1400 .0055 4
1864818 SNHX1102PZTNGP SNHX1102PZTNGP KC920M 11.000 .4330 2.300 .0906 11.000 .4331     4
1864821 SNHX1102PZTNGP SNHX1102PZTNGP KC925M 11.000 .4330 2.300 .0906 11.000 .4331     4
2227145 SNHX1102PZTNGP SNHX1102PZTNGP KCPK30 11.0000 .4330 2.3000 .0906 11.0000 .4331 0.1400 .0055 4
1198143 SNHX11T3PZTNGP SNHX11T3PZTNGP K125M 11.000 .4330 2.700 .1060 11.000 .4330     4
1864813 SNHX11T3PZTNGP SNHX11T3PZTNGP KC735M 11.000 .4330 2.700 .1060 11.000 .4330     4
1864816 SNHX11T3PZTNGP SNHX11T3PZTNGP KC725M 11.0000 .4330 2.7000 .1060 11.0000 .4330 0.1400 .0055 4
1864822 SNHX11T3PZTNGP SNHX11T3PZTNGP KC925M 11.000 .4330 2.700 .1060 11.000 .4330     4
1864814 SNHX1203PZTNGP SNHX1203PZTNGP KC735M 12.700 .5000 3.200 .1260 12.700 .5000 0.140 .0055 4
1864823 SNHX1203PZTNGP SNHX1203PZTNGP KC925M 12.700 .5000 3.200 .1260 12.700 .5000     4
5586062 SNHX1203PZTNGP SNHX1203PZTNGP KCPM40 12.7000 .5000 3.2000 .1260 12.7000 .5000 0.1400 .0055 4
1864620 SNHX1204PZTNGP SNHX1204PZTNGP KC925M 12.700 .5000 4.000 .1575 12.700 .5000     4
1864621 SNHX12L4PZTNGP SNHX12L4PZTNGP KC925M 12.700 .5000 4.000 .1772 12.700 .5000     4
2227149 SNHX12L4PZTNGP SNHX12L4PZTNGP KCPK30 12.7000 .5000 4.0000 .1772 12.7000 .5000 0.1400 .0055 4
1864824 SNHX12L5PZTNGP SNHX12L5PZTNGP KC735M 12.700 .5000 5.400 .2126 12.700 .5000 0.140 .0055 4
2227150 SNHX12L5PZTNGP SNHX12L5PZTNGP KCPK30 12.7000 .5000 5.4000 .2126 12.7000 .5000 0.1400 .0055 4
Select Filters
FiltersX
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (23)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (23)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (23)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (23)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (4)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
Applications
  • ID Thread Turning (53)
Cutting Edges Per Insert
to
cornerConfiguration
Corner Radius
to
Corner Radius
to
application
Grade Of Cutting Tool
  • KC930M (7)
  • KC925M (6)
  • KCPK30 (6)
  • KCPM40 (6)
  • GX (4)
  • K110M (4)
  • KC725M (4)
  • KC735M (4)
  • KC935M (4)
  • K125M (3)
  • KC920M (2)
  • PVA (2)
  • CF2 (1)
Wiper Insert
  • N (50)
frontEnd
Insert Shape
  • S-SQUARE ON EDGE 90 (53)
insertGeometry
Shape
  • S-SQUARE ON EDGE 90 (53)
Insert IC Size
to
Insert IC Size
to
Cutting Edge Length
to
Cutting Edge Length
to
Chip Breaker CBMD
  • GP (35)
Cutting Tool Material
  • H W (52)
Tolerance Class
  • H (35)
other
Grade
  • KC930M (7)
  • KC925M (6)
  • KCPK30 (6)
  • KCPM40 (6)
  • GX (4)
  • K110M (4)
  • KC725M (4)
  • KC735M (4)
  • KC935M (4)
  • K125M (3)
  • KC920M (2)
  • PVA (2)
  • CF2 (1)
Platform
  • SN Slotting (14)
Tool Unit
  • I (53)
  • M (53)
Insert Hand
  • N (48)
No filters matching ""

Grades

  • CF2
  • GX

    Uncoated carbide grade
    Heavy Machining (H)
    For machining steel
    For use in unfavourable conditions

  • K110M

    A universal uncoated carbide grade for machining non-ferrous materials for use in light and general machining. K110M can be used with or without coolant.

    K
    N
  • K125M

    An uncoated carbide grade particularly suitable for dry machining of steel. Its primary use is in light and general machining.

    P
  • KC725M

    A high-performance TiAlN-PVD-coated carbide grade for milling steel, stainless steel and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. KC725M is primarily for use in general and heavy machining.

    P
    S
    M
  • KC735M

    A TiN-PVD-coated carbide grade offering an unusual combination of high toughness and wear resistance. Even under extreme toughness requirements, KC735M achieves outstanding results in general and heavy machining applications and is suitable for dry and wet machining.

    P
    M
  • KC920M
  • KC925M
  • KC930M

    Coated carbide grade:
    MT-CVD-TiN-TiCN-TIN coating
    Light, general and heavy machining (L,G,H)
    For machining steel, stainless steel and ductile cast iron

  • KC935M

    Coated carbide grade with CVD multi-layer coating (TiN/MT TiCN/Al2O3). KC935M is extremely well
    suited for wet or dry general purpose milling. KC935M can be used effectively across a wide range of
    materials such as steel, stainless steel, and ductile iron. Performs best dry at surface speeds in
    excess of 600 sfm or 180 meters.

  • KCPK30

    A multilayered TiN-TiCN-Al2O3-CVD-coated carbide grade with advanced Beyond™ post-coat treatment and a very tough substrate. KCPK30 has a wide application area in general and rough milling of steels and cast irons. It performs best dry but can also be used wet.

    P
    S
    K
    M
  • KCPM40

    Coated carbide grade with an advanced PVD TiAlN/AlCrN coating. Tough substrate with excellent capability at higher temperatures. KCPM40™ is the first choice for milling steel and stainless steel. Good thermal shock resistance makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.

    P
    S
    M
  • PVA

Inserts for Płytki do frezów do rowków 90° SN • SNHX-NGP

Holders for Płytki do frezów do rowków 90° SN • SNHX-NGP