Powiadomienia

Oznacz wszystkie jako przeczytane
Mobile Menu

Beyond Evolution

Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1440)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1440)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1440)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1440)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1440)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1440)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1440)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1440)
  • M Stainless Steel (1349)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1349)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1349)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1349)
  • K Cast Iron (1419)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1419)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1415)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1410)
  • N Non-Ferrous Materials (1442)
    • N1
      Wrought Aluminum
      (1428)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1342)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (449)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1442)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1356)
    • N6
      Carbon, Graphite Composites, CFRP
      (1342)
    • N7
      MMC's
      (348)
  • S High-Temp Alloys (1430)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1430)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1430)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1430)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1424)
  • H Hardened Materials (1132)
    • H1
      Hardened Materials 44-48 HRC
      (1132)
    • H2
      Hardened Materials 48-55 HRC
      (1016)
    • H3
      Hardened Materials 56-60 HRC
      (306)
    • H4
      Hardened Materials >60 HRC
      (306)
Select First Choice
  • BR (23)
  • CN (190)
  • DE (190)
  • GB (108)
  • IN (33)
  • SG (67)
  • US (278)
Applications
Applications
  • Back Boring Back Boring (127)
  • Boring Boring (225)
  • CRT Profiling CRT Profiling (20)
  • Cut-Off Cut-Off (239)
  • Deep Grooving Deep Grooving (54)
  • Face Grooving Face Grooving (943)
  • Facing Facing (135)
  • Grooving Grooving (1101)
  • ID Facing ID Facing (140)
  • ID Grooving ID Grooving (620)
  • ID Thread Turning ID Thread Turning (87)
  • Multiple Direction Cutting Multiple Direction Cutting (499)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (530)
  • Profiling Profiling (402)
  • TRN Boring TRN Boring (50)
  • Threading Threading (130)
  • Turning Turning (304)
Type of Thread
Type of Thread
  • 60 (188)
  • ACME (123)
  • API (115)
  • API RD (87)
  • BSW (79)
  • BUTTRESS (183)
  • M (115)
  • NPT (79)
  • STUB ACME (79)
  • UN (183)
  • UNJ (79)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1002)
  • Lightly Interrupted Cut (1114)
  • Smooth Cut (1232)
  • Varying Depth of Cut (1193)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 60.0 (4)
  • 62.5 (2)
  • 72.5 (2)
  • 90.0 (749)
  • 92.25 (27)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (9)
  • Boring Bar Shank (212)
  • Toolholder (468)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (741)
  • 2.0 (1123)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (79)
  • 0.003 in (188)
  • 0.004 in (147)
  • 0.005 in (155)
  • 0.006 in (115)
  • 0.007 in (151)
  • 0.008 in (652)
  • 0.01 in (151)
  • 0.011 in (79)
  • 0.012 in (143)
  • 0.014 in (118)
  • 0.016 in (665)
  • 0.017 in (79)
  • 0.019 in (115)
  • 0.02 in (234)
  • 0.023 in (118)
  • 0.03 in (70)
  • 0.031 in (662)
  • 0.033 in (11)
  • 0.034 in (50)
  • 0.035 in (115)
  • 0.039 in (351)
  • 0.041 in (118)
  • 0.046 in (18)
  • 0.047 in (373)
  • 0.048 in (14)
  • 0.049 in (148)
  • 0.06 in (287)
  • 0.061 in (47)
  • 0.062 in (93)
  • 0.063 in (400)
  • 0.065 in (45)
  • 0.069 in (148)
  • 0.078 in (94)
  • 0.079 in (219)
  • 0.08 in (57)
  • 0.081 in (49)
  • 0.089 in (115)
  • 0.094 in (123)
  • 0.095 in (160)
  • 0.096 in (48)
  • 0.098 in (122)
  • 0.099 in (46)
  • 0.1 in (41)
  • 0.119 in (80)
  • 0.12 in (84)
  • 0.125 in (181)
  • 0.128 in (37)
  • 0.156 in (40)
  • 0.157 in (40)
  • 0.158 in (44)
  • 0.159 in (27)
  • 0.187 in (8)
  • 0.188 in (33)
  • 0.197 in (10)
  • 0.198 in (12)
  • 0.25 in (13)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (79)
  • 0.076 mm (188)
  • 0.1 mm (147)
  • 0.125 mm (155)
  • 0.151 mm (115)
  • 0.176 mm (151)
  • 0.2 mm (652)
  • 0.225 mm (79)
  • 0.25 mm (151)
  • 0.275 mm (79)
  • 0.301 mm (143)
  • 0.325 mm (118)
  • 0.351 mm (115)
  • 0.4 mm (665)
  • 0.426 mm (79)
  • 0.45 mm (115)
  • 0.476 mm (40)
  • 0.5 mm (234)
  • 0.576 mm (118)
  • 0.75 mm (70)
  • 0.775 mm (210)
  • 0.8 mm (452)
  • 0.826 mm (11)
  • 0.851 mm (50)
  • 0.9 mm (115)
  • 1.0 mm (351)
  • 1.05 mm (118)
  • 1.175 mm (18)
  • 1.201 mm (373)
  • 1.225 mm (14)
  • 1.25 mm (148)
  • 1.5 mm (279)
  • 1.526 mm (71)
  • 1.55 mm (47)
  • 1.576 mm (93)
  • 1.6 mm (400)
  • 1.651 mm (45)
  • 1.75 mm (148)
  • 1.975 mm (94)
  • 2.0 mm (219)
  • 2.025 mm (57)
  • 2.051 mm (49)
  • 2.25 mm (115)
  • 2.375 mm (123)
  • 2.401 mm (160)
  • 2.45 mm (48)
  • 2.5 mm (122)
  • 2.526 mm (46)
  • 2.551 mm (41)
  • 3.0 mm (80)
  • 3.026 mm (43)
  • 3.051 mm (41)
  • 3.176 mm (181)
  • 3.25 mm (37)
  • 3.95 mm (25)
  • 3.975 mm (15)
  • 4.0 mm (40)
  • 4.025 mm (44)
  • 4.05 mm (27)
  • 4.75 mm (8)
  • 4.775 mm (33)
  • 5.0 mm (10)
  • 5.025 mm (12)
  • 6.351 mm (13)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1013)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1013)
Corner Chamfer Min do Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (272)
  • Lightly Interrupted Cut (332)
  • Smooth Cut (450)
  • Varying Depth of Cut (411)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K1 (5)
  • K1025 (100)
  • K2885 (147)
  • K313 (865)
  • K420 (263)
  • K4H (111)
  • K6 (4)
  • K68 (342)
  • K8735 (29)
  • KB1345 (140)
  • KB1630 (306)
  • KB5625 (266)
  • KBH20 (227)
  • KC250 (234)
  • KC5010 (716)
  • KC5025 (668)
  • KC5410 (329)
  • KC5510 (20)
  • KC710 (183)
  • KC720 (217)
  • KC722 (183)
  • KC730 (415)
  • KC7310 (139)
  • KC732 (225)
  • KC8050 (152)
  • KC810 (299)
  • KC850 (354)
  • KC9025 (94)
  • KC910 (252)
  • KC9105 (62)
  • KC9110 (561)
  • KC9120 (113)
  • KC9125 (366)
  • KC9225 (152)
  • KC9315 (89)
  • KC9320 (183)
  • KC935 (329)
  • KC950 (277)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCK20 (358)
  • KCK20B (426)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCM35B (162)
  • KCP05 (93)
  • KCP10 (376)
  • KCP10B (498)
  • KCP25 (377)
  • KCP25B (548)
  • KCS10 (56)
  • KCS10B (89)
  • KCU10 (1025)
  • KCU25 (980)
  • KD050 (122)
  • KD081 (108)
  • KD100 (192)
  • KD120 (201)
  • KD1405 (152)
  • KD1425 (180)
  • KMS (101)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (200)
  • KT315 (576)
  • KU10 (264)
  • KU10T (183)
  • KU25T (183)
  • KU30T (370)
  • KY3000 (115)
  • KY3500 (214)
  • KYS30 (90)
  • SP88F8 (36)
Hand Of Tool
Hand Of Tool
  • L (300)
  • N (13)
  • R (376)
Wiper Insert
Wiper Insert
  • N (1565)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 8.225 mm (2)
  • 8.525 mm (4)
  • 8.875 mm (2)
  • 9.0 mm (6)
  • 9.4 mm (2)
  • 9.525 mm (6)
  • 10.976 mm (2)
  • 11.0 mm (11)
  • 11.05 mm (7)
  • 11.101 mm (2)
  • 12.101 mm (2)
  • 12.175 mm (2)
  • 12.576 mm (6)
  • 12.701 mm (9)
  • 12.726 mm (3)
  • 12.75 mm (2)
  • 12.8 mm (4)
  • 12.851 mm (2)
  • 12.9 mm (2)
  • 13.0 mm (17)
  • 13.025 mm (2)
  • 13.951 mm (2)
  • 13.976 mm (4)
  • 14.0 mm (2)
  • 14.15 mm (2)
  • 14.275 mm (10)
  • 15.875 mm (6)
  • 15.976 mm (4)
  • 16.0 mm (7)
  • 16.2 mm (5)
  • 16.225 mm (2)
  • 16.25 mm (2)
  • 16.875 mm (5)
  • 17.0 mm (15)
  • 17.3 mm (6)
  • 17.35 mm (2)
  • 17.475 mm (4)
  • 17.5 mm (2)
  • 18.925 mm (2)
  • 19.05 mm (9)
  • 19.075 mm (11)
  • 19.125 mm (12)
  • 19.225 mm (4)
  • 19.25 mm (2)
  • 19.425 mm (2)
  • 20.0 mm (4)
  • 20.05 mm (8)
  • 20.1 mm (14)
  • 20.201 mm (24)
  • 20.3 mm (2)
  • 21.125 mm (4)
  • 22.0 mm (14)
  • 22.225 mm (3)
  • 22.6 mm (2)
  • 25.0 mm (14)
  • 25.05 mm (8)
  • 25.1 mm (12)
  • 25.201 mm (10)
  • 25.3 mm (2)
  • 25.35 mm (2)
  • 25.401 mm (21)
  • 25.425 mm (10)
  • 25.475 mm (14)
  • 25.5 mm (4)
  • 25.576 mm (5)
  • 25.701 mm (2)
  • 25.8 mm (2)
  • 25.901 mm (2)
  • 26.0 mm (2)
  • 26.225 mm (2)
  • 27.0 mm (5)
  • 28.576 mm (3)
  • 29.875 mm (3)
  • 30.0 mm (8)
  • 31.75 mm (33)
  • 31.826 mm (10)
  • 31.925 mm (4)
  • 32.0 mm (25)
  • 32.051 mm (4)
  • 32.075 mm (8)
  • 32.15 mm (2)
  • 32.176 mm (4)
  • 32.25 mm (2)
  • 32.301 mm (4)
  • 32.4 mm (2)
  • 32.525 mm (2)
  • 32.575 mm (2)
  • 32.65 mm (2)
  • 34.926 mm (4)
  • 35.0 mm (2)
  • 38.1 mm (19)
  • 38.176 mm (2)
  • 38.275 mm (2)
  • 38.401 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (4)
  • 41.276 mm (5)
  • 50.801 mm (7)
F Dimension Min do F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.324 in (2)
  • 0.336 in (4)
  • 0.35 in (2)
  • 0.354 in (6)
  • 0.37 in (2)
  • 0.375 in (6)
  • 0.432 in (2)
  • 0.433 in (11)
  • 0.435 in (7)
  • 0.437 in (2)
  • 0.477 in (2)
  • 0.48 in (2)
  • 0.495 in (6)
  • 0.5 in (9)
  • 0.501 in (3)
  • 0.502 in (2)
  • 0.504 in (4)
  • 0.506 in (2)
  • 0.508 in (2)
  • 0.512 in (17)
  • 0.513 in (2)
  • 0.549 in (2)
  • 0.55 in (4)
  • 0.551 in (2)
  • 0.557 in (2)
  • 0.562 in (10)
  • 0.625 in (6)
  • 0.629 in (4)
  • 0.63 in (7)
  • 0.638 in (5)
  • 0.639 in (2)
  • 0.64 in (2)
  • 0.664 in (5)
  • 0.669 in (15)
  • 0.681 in (6)
  • 0.683 in (2)
  • 0.689 in (4)
  • 0.69 in (2)
  • 0.745 in (2)
  • 0.75 in (9)
  • 0.751 in (11)
  • 0.753 in (12)
  • 0.757 in (4)
  • 0.758 in (2)
  • 0.765 in (2)
  • 0.787 in (4)
  • 0.789 in (8)
  • 0.791 in (14)
  • 0.795 in (24)
  • 0.799 in (2)
  • 0.833 in (4)
  • 0.866 in (14)
  • 0.875 in (3)
  • 0.89 in (2)
  • 0.984 in (14)
  • 0.986 in (8)
  • 0.988 in (12)
  • 0.992 in (10)
  • 0.996 in (2)
  • 0.998 in (2)
  • 1.0 in (21)
  • 1.002 in (10)
  • 1.004 in (18)
  • 1.008 in (5)
  • 1.012 in (2)
  • 1.016 in (3)
  • 1.02 in (3)
  • 1.024 in (2)
  • 1.032 in (2)
  • 1.063 in (5)
  • 1.125 in (3)
  • 1.176 in (3)
  • 1.181 in (8)
  • 1.25 in (33)
  • 1.254 in (10)
  • 1.258 in (4)
  • 1.26 in (25)
  • 1.262 in (4)
  • 1.264 in (8)
  • 1.266 in (2)
  • 1.268 in (4)
  • 1.27 in (2)
  • 1.272 in (4)
  • 1.276 in (2)
  • 1.281 in (2)
  • 1.282 in (2)
  • 1.285 in (2)
  • 1.375 in (4)
  • 1.379 in (2)
  • 1.5 in (19)
  • 1.504 in (2)
  • 1.508 in (2)
  • 1.512 in (2)
  • 1.516 in (2)
  • 1.52 in (2)
  • 1.575 in (4)
  • 1.625 in (5)
  • 2.0 in (7)
F Dimension Min do F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (88)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (12)
  • 16.776 mm (2)
  • 17.0 mm (3)
  • 17.026 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (21)
  • 20.326 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (33)
  • 25.401 mm (6)
  • 26.0 mm (7)
  • 26.925 mm (1)
  • 28.576 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (20)
  • 33.025 mm (5)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 36.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (8)
  • 40.0 mm (14)
  • 41.301 mm (39)
  • 42.0 mm (5)
  • 44.0 mm (6)
  • 44.45 mm (2)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 47.6 mm (39)
  • 48.0 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (4)
  • 52.0 mm (14)
  • 53.85 mm (1)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (29)
  • 57.151 mm (6)
  • 57.2 mm (15)
  • 58.0 mm (4)
  • 60.0 mm (4)
  • 60.325 mm (4)
  • 63.0 mm (1)
  • 63.5 mm (23)
  • 64.0 mm (4)
  • 65.0 mm (1)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (8)
  • 76.2 mm (8)
  • 80.0 mm (7)
  • 82.551 mm (4)
  • 88.9 mm (117)
  • 90.0 mm (8)
  • 92.0 mm (3)
  • 100.0 mm (3)
  • 120.0 mm (12)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 139.701 mm (220)
  • 146.05 mm (3)
  • 174.601 mm (39)
  • 184.0 mm (3)
  • 200.0 mm (8)
  • 209.601 mm (97)
  • 222.3 mm (15)
  • 250.0 mm (6)
  • 290.0 mm (7)
  • 333.0 mm (3)
Minimum Axial Groove Diameter Min