Narzędzia kombinowane

Wybierz filtry
Filters
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (260)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (260)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (260)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (260)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (260)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (260)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (260)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (222)
  • M Stainless Steel (132)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (132)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (132)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (117)
  • K Cast Iron (261)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (261)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (261)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (261)
  • N Non-Ferrous Materials (143)
    • N1
      Wrought Aluminum (143)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (143)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (143)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (143)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (133)
    • N6
      Carbon, Graphite Composites, CFRP (133)
    • N7
      MMC's (118)
  • S High-Temp Alloys (127)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (117)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (117)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (117)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (127)
  • H Hardened Materials (109)
    • H1
      Hardened Materials 44-48 HRC (109)
    • H2
      Hardened Materials 48-55 HRC (109)
    • H3
      Hardened Materials 56-60 HRC (109)
    • H4
      Hardened Materials >60 HRC (109)
  • C CFRP Materials (25)
    • C1
      CFRP, CFRP / CFRP (15)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (15)
    • C3
      CFRP / Titanium CFRP / High Temp (15)
    • C4
      CFRP / Stainless Steel (15)
Select First Choice
  • IN (3)
Applications
Applications
  • Counterboring Counterboring (60)
  • Countersinking Countersinking (152)
  • Drilling Drilling (249)
  • Inclined Exit Drilling Inclined Exit Drilling (106)
  • Stacked Plates Drilling Stacked Plates Drilling (134)
Cutting Diameter
Cutting Diameter
  • 0.125 in (2)
  • 0.134 in (3)
  • 0.138 in (1)
  • 0.143 in (1)
  • 0.15 in (2)
  • 0.154 in (1)
  • 0.156 in (2)
  • 0.157 in (5)
  • 0.161 in (3)
  • 0.165 in (1)
  • 0.169 in (1)
  • 0.177 in (1)
  • 0.181 in (3)
  • 0.182 in (2)
  • 0.188 in (2)
  • 0.19 in (7)
  • 0.197 in (2)
  • 0.201 in (3)
  • 0.206 in (1)
  • 0.209 in (1)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.219 in (8)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.237 in (4)
  • 0.24 in (3)
  • 0.244 in (1)
  • 0.25 in (12)
  • 0.252 in (1)
  • 0.256 in (1)
  • 0.257 in (1)
  • 0.26 in (1)
  • 0.264 in (2)
  • 0.266 in (1)
  • 0.268 in (2)
  • 0.272 in (2)
  • 0.276 in (2)
  • 0.281 in (1)
  • 0.288 in (4)
  • 0.291 in (2)
  • 0.295 in (1)
  • 0.297 in (2)
  • 0.307 in (1)
  • 0.311 in (1)
  • 0.312 in (2)
  • 0.313 in (8)
  • 0.315 in (5)
  • 0.319 in (5)
  • 0.322 in (1)
  • 0.323 in (3)
  • 0.327 in (2)
  • 0.328 in (3)
  • 0.331 in (2)
  • 0.332 in (2)
  • 0.335 in (4)
  • 0.336 in (2)
  • 0.339 in (4)
  • 0.343 in (4)
  • 0.345 in (3)
  • 0.347 in (3)
  • 0.349 in (2)
  • 0.351 in (2)
  • 0.354 in (2)
  • 0.358 in (3)
  • 0.359 in (1)
  • 0.368 in (1)
  • 0.37 in (1)
  • 0.374 in (2)
  • 0.375 in (7)
  • 0.376 in (1)
  • 0.377 in (1)
  • 0.378 in (1)
  • 0.382 in (1)
  • 0.386 in (2)
  • 0.387 in (1)
  • 0.39 in (1)
  • 0.391 in (2)
  • 0.394 in (6)
  • 0.395 in (2)
  • 0.397 in (2)
  • 0.398 in (4)
  • 0.402 in (3)
  • 0.404 in (2)
  • 0.406 in (3)
  • 0.408 in (4)
  • 0.41 in (4)
  • 0.414 in (4)
  • 0.417 in (1)
  • 0.421 in (1)
  • 0.425 in (1)
  • 0.433 in (3)
  • 0.437 in (6)
  • 0.438 in (3)
  • 0.441 in (2)
  • 0.445 in (1)
  • 0.449 in (1)
  • 0.453 in (3)
  • 0.457 in (1)
  • 0.461 in (2)
  • 0.465 in (2)
  • 0.47 in (2)
  • 0.473 in (5)
  • 0.477 in (1)
  • 0.48 in (5)
  • 0.484 in (2)
  • 0.488 in (1)
  • 0.491 in (1)
  • 0.492 in (2)
  • 0.5 in (1)
  • 0.504 in (1)
  • 0.512 in (3)
  • 0.516 in (4)
  • 0.52 in (2)
  • 0.523 in (1)
  • 0.524 in (1)
  • 0.527 in (1)
  • 0.528 in (1)
  • 0.531 in (2)
  • 0.551 in (7)
  • 0.555 in (5)
  • 0.559 in (4)
  • 0.564 in (6)
  • 0.568 in (3)
  • 0.572 in (1)
  • 0.576 in (1)
  • 0.578 in (1)
  • 0.579 in (1)
  • 0.583 in (1)
  • 0.587 in (1)
  • 0.591 in (3)
  • 0.594 in (2)
  • 0.595 in (2)
  • 0.598 in (2)
  • 0.602 in (2)
  • 0.605 in (2)
  • 0.606 in (2)
  • 0.609 in (2)
  • 0.61 in (6)
  • 0.614 in (2)
  • 0.618 in (2)
  • 0.622 in (2)
  • 0.625 in (5)
  • 0.628 in (2)
  • 0.63 in (6)
  • 0.631 in (2)
  • 0.633 in (2)
  • 0.634 in (2)
  • 0.638 in (2)
  • 0.641 in (2)
  • 0.642 in (2)
  • 0.646 in (2)
  • 0.65 in (4)
  • 0.654 in (2)
  • 0.656 in (2)
  • 0.657 in (2)
  • 0.661 in (2)
  • 0.664 in (2)
  • 0.665 in (2)
  • 0.669 in (3)
  • 0.672 in (1)
  • 0.673 in (1)
  • 0.677 in (1)
  • 0.681 in (1)
  • 0.685 in (1)
  • 0.689 in (2)
  • 0.69 in (4)
  • 0.694 in (1)
  • 0.698 in (1)
  • 0.702 in (1)
  • 0.704 in (1)
  • 0.705 in (1)
  • 0.709 in (4)
  • 0.713 in (1)
  • 0.717 in (1)
  • 0.719 in (1)
  • 0.72 in (1)
  • 0.724 in (1)
  • 0.728 in (1)
  • 0.732 in (1)
  • 0.734 in (1)
  • 0.736 in (1)
  • 0.74 in (1)
  • 0.744 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.939 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.176 mm (2)
  • 3.401 mm (3)
  • 3.5 mm (1)
  • 3.6 mm (1)
  • 3.801 mm (2)
  • 3.901 mm (1)
  • 3.95 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (5)
  • 4.101 mm (3)
  • 4.2 mm (1)
  • 4.3 mm (1)
  • 4.5 mm (1)
  • 4.601 mm (3)
  • 4.625 mm (2)
  • 4.775 mm (2)
  • 4.825 mm (7)
  • 5.0 mm (2)
  • 5.101 mm (3)
  • 5.2 mm (1)
  • 5.301 mm (1)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.551 mm (8)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 6.0 mm (4)
  • 6.101 mm (3)
  • 6.2 mm (1)
  • 6.351 mm (12)
  • 6.4 mm (1)
  • 6.5 mm (1)
  • 6.525 mm (1)
  • 6.601 mm (1)
  • 6.7 mm (2)
  • 6.75 mm (1)
  • 6.801 mm (2)
  • 6.9 mm (2)
  • 7.0 mm (2)
  • 7.15 mm (1)
  • 7.301 mm (4)
  • 7.4 mm (2)
  • 7.5 mm (1)
  • 7.551 mm (2)
  • 7.801 mm (1)
  • 7.9 mm (1)
  • 7.926 mm (2)
  • 7.95 mm (8)
  • 8.0 mm (5)
  • 8.1 mm (5)
  • 8.175 mm (1)
  • 8.201 mm (3)
  • 8.3 mm (2)
  • 8.326 mm (3)
  • 8.4 mm (2)
  • 8.425 mm (2)
  • 8.5 mm (4)
  • 8.525 mm (2)
  • 8.6 mm (4)
  • 8.701 mm (4)
  • 8.725 mm (3)
  • 8.8 mm (3)
  • 8.85 mm (2)
  • 8.9 mm (2)
  • 9.0 mm (2)
  • 9.1 mm (3)
  • 9.125 mm (1)
  • 9.35 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (2)
  • 9.525 mm (7)
  • 9.55 mm (1)
  • 9.576 mm (1)
  • 9.601 mm (1)
  • 9.701 mm (1)
  • 9.8 mm (2)
  • 9.826 mm (1)
  • 9.9 mm (1)
  • 9.925 mm (2)
  • 10.0 mm (6)
  • 10.025 mm (2)
  • 10.076 mm (2)
  • 10.101 mm (4)
  • 10.201 mm (3)
  • 10.25 mm (2)
  • 10.3 mm (3)
  • 10.326 mm (4)
  • 10.4 mm (4)
  • 10.5 mm (4)
  • 10.601 mm (1)
  • 10.701 mm (1)
  • 10.8 mm (1)
  • 11.0 mm (3)
  • 11.101 mm (6)
  • 11.125 mm (3)
  • 11.201 mm (2)
  • 11.3 mm (1)
  • 11.4 mm (1)
  • 11.5 mm (3)
  • 11.601 mm (1)
  • 11.701 mm (2)
  • 11.8 mm (2)
  • 11.9 mm (2)
  • 12.0 mm (5)
  • 12.101 mm (1)
  • 12.201 mm (5)
  • 12.3 mm (2)
  • 12.4 mm (1)
  • 12.476 mm (1)
  • 12.5 mm (2)
  • 12.701 mm (1)
  • 12.8 mm (1)
  • 13.0 mm (3)
  • 13.101 mm (4)
  • 13.201 mm (2)
  • 13.275 mm (1)
  • 13.3 mm (1)
  • 13.375 mm (1)
  • 13.4 mm (1)
  • 13.5 mm (2)
  • 14.0 mm (7)
  • 14.101 mm (5)
  • 14.201 mm (4)
  • 14.3 mm (6)
  • 14.4 mm (3)
  • 14.5 mm (1)
  • 14.601 mm (1)
  • 14.675 mm (1)
  • 14.701 mm (1)
  • 14.8 mm (1)
  • 14.9 mm (1)
  • 15.0 mm (3)
  • 15.076 mm (2)
  • 15.101 mm (2)
  • 15.201 mm (2)
  • 15.3 mm (2)
  • 15.375 mm (2)
  • 15.4 mm (2)
  • 15.476 mm (2)
  • 15.5 mm (6)
  • 15.601 mm (2)
  • 15.701 mm (2)
  • 15.8 mm (2)
  • 15.875 mm (5)
  • 15.951 mm (2)
  • 16.0 mm (6)
  • 16.026 mm (2)
  • 16.075 mm (2)
  • 16.1 mm (2)
  • 16.2 mm (2)
  • 16.276 mm (2)
  • 16.3 mm (2)
  • 16.401 mm (2)
  • 16.5 mm (4)
  • 16.6 mm (2)
  • 16.675 mm (2)
  • 16.7 mm (2)
  • 16.8 mm (2)
  • 16.875 mm (2)
  • 16.901 mm (2)
  • 17.0 mm (3)
  • 17.075 mm (1)
  • 17.1 mm (1)
  • 17.2 mm (1)
  • 17.3 mm (1)
  • 17.401 mm (1)
  • 17.475 mm (2)
  • 17.5 mm (4)
  • 17.6 mm (1)
  • 17.7 mm (1)
  • 17.8 mm (1)
  • 17.85 mm (1)
  • 17.901 mm (1)
  • 18.0 mm (4)
  • 18.1 mm (1)
  • 18.2 mm (1)
  • 18.25 mm (1)
  • 18.3 mm (1)
  • 18.401 mm (1)
  • 18.5 mm (1)
  • 18.6 mm (1)
  • 18.651 mm (1)
  • 18.7 mm (1)
  • 18.8 mm (1)
  • 18.901 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 23.826 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.6 mm (1)
  • 10.0 mm (2)
  • 10.601 mm (1)
  • 11.201 mm (1)
  • 12.3 mm (2)
  • 12.9 mm (1)
  • 13.3 mm (1)
  • 13.4 mm (2)
  • 13.701 mm (1)
  • 14.201 mm (1)
  • 14.701 mm (1)
  • 15.601 mm (1)
  • 15.8 mm (1)
  • 15.9 mm (1)
  • 16.6 mm (1)
  • 17.6 mm (2)
  • 17.8 mm (1)
  • 18.2 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 19.3 mm (1)
  • 19.401 mm (3)
  • 19.5 mm (1)
  • 20.3 mm (1)
  • 21.0 mm (1)
  • 21.1 mm (1)
  • 21.5 mm (1)