Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

GOdrill

  • Ekonomiczne rozwiązanie, jednokrotne.
  • Wiercenie wiertłami węglikowymi o średnicy 1–20 mm (0,0394 ”-0,7874”) i możliwości wiercenia 8 X D.
  • Konstrukcja bez łysinek zmniejsza tarcie i ciepło.
  • Chłodzenie wewnętrzne dostępne od 1mm (0.0394”).
  • Pokrycie TiN  jako wskaźnik zużycia.

GOdrill • Mikrowiertła

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1781)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1781)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1781)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1781)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1781)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1781)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1781)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1781)
  • M Stainless Steel (1781)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1781)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1781)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1781)
  • K Cast Iron (1781)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1781)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1781)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1781)
  • N Non-Ferrous Materials (1781)
    • N1
      Wrought Aluminum
      (1781)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1781)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1781)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1781)
  • S High-Temp Alloys (1781)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1781)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1781)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1781)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1781)
  • H Hardened Materials (1781)
    • H1
      Hardened Materials 44-48 HRC
      (1781)
    • H2
      Hardened Materials 48-55 HRC
      (1781)
Select First Choice
  • BR (103)
  • CN (587)
  • DE (568)
  • GB (414)
  • IN (156)
  • SG (208)
  • US (775)
Applications
Applications
  • Drilling Drilling (1781)
  • Stacked Plates Drilling Stacked Plates Drilling (1781)
Cutting Diameter
Cutting Diameter
  • 0.098 in (10)
  • 0.106 in (10)
  • 0.119 in (10)
  • 0.122 in (9)
  • 0.126 in (8)
  • 0.13 in (9)
  • 0.134 in (9)
  • 0.138 in (9)
  • 0.143 in (8)
  • 0.146 in (8)
  • 0.15 in (9)
  • 0.154 in (9)
  • 0.157 in (9)
  • 0.161 in (14)
  • 0.165 in (9)
  • 0.169 in (9)
  • 0.174 in (8)
  • 0.177 in (9)
  • 0.185 in (8)
  • 0.189 in (9)
  • 0.193 in (8)
  • 0.197 in (9)
  • 0.201 in (14)
  • 0.206 in (9)
  • 0.209 in (9)
  • 0.213 in (14)
  • 0.217 in (9)
  • 0.221 in (14)
  • 0.224 in (8)
  • 0.228 in (9)
  • 0.232 in (9)
  • 0.237 in (9)
  • 0.24 in (9)
  • 0.244 in (9)
  • 0.248 in (8)
  • 0.256 in (9)
  • 0.26 in (9)
  • 0.264 in (9)
  • 0.268 in (9)
  • 0.272 in (9)
  • 0.276 in (9)
  • 0.28 in (9)
  • 0.284 in (8)
  • 0.288 in (8)
  • 0.291 in (9)
  • 0.295 in (9)
  • 0.307 in (9)
  • 0.311 in (8)
  • 0.315 in (9)
  • 0.319 in (9)
  • 0.323 in (9)
  • 0.327 in (8)
  • 0.331 in (8)
  • 0.335 in (9)
  • 0.339 in (9)
  • 0.343 in (9)
  • 0.347 in (9)
  • 0.351 in (8)
  • 0.354 in (9)
  • 0.366 in (9)
  • 0.374 in (9)
  • 0.382 in (9)
  • 0.386 in (9)
  • 0.394 in (10)
  • 0.402 in (9)
  • 0.406 in (9)
  • 0.41 in (9)
  • 0.414 in (9)
  • 0.417 in (9)
  • 0.425 in (9)
  • 0.433 in (9)
  • 0.441 in (9)
  • 0.449 in (9)
  • 0.453 in (14)
  • 0.457 in (9)
  • 0.461 in (9)
  • 0.465 in (9)
  • 0.47 in (13)
  • 0.473 in (9)
  • 0.48 in (9)
  • 0.484 in (14)
  • 0.488 in (9)
  • 0.492 in (9)
  • 0.5 in (9)
  • 0.512 in (9)
  • 0.516 in (13)
  • 0.524 in (9)
  • 0.531 in (9)
  • 0.547 in (12)
  • 0.551 in (9)
  • 0.555 in (9)
  • 0.564 in (12)
  • 0.572 in (9)
  • 0.591 in (9)
  • 0.63 in (9)
  • 0.669 in (9)
  • 0.69 in (9)
  • 0.709 in (9)
  • 0.748 in (9)
  • 0.787 in (9)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.5 mm (10)
  • 2.7 mm (10)
  • 3.0 mm (10)
  • 3.1 mm (9)
  • 3.2 mm (8)
  • 3.301 mm (9)
  • 3.401 mm (9)
  • 3.5 mm (9)
  • 3.6 mm (8)
  • 3.7 mm (8)
  • 3.801 mm (9)
  • 3.901 mm (9)
  • 4.0 mm (9)
  • 4.101 mm (14)
  • 4.2 mm (9)
  • 4.3 mm (9)
  • 4.4 mm (8)
  • 4.5 mm (9)
  • 4.7 mm (8)
  • 4.801 mm (9)
  • 4.9 mm (8)
  • 5.0 mm (9)
  • 5.101 mm (14)
  • 5.2 mm (9)
  • 5.301 mm (9)
  • 5.4 mm (14)
  • 5.5 mm (9)
  • 5.601 mm (9)
  • 5.7 mm (8)
  • 5.801 mm (9)
  • 5.9 mm (9)
  • 6.0 mm (9)
  • 6.101 mm (9)
  • 6.2 mm (9)
  • 6.301 mm (8)
  • 6.5 mm (9)
  • 6.601 mm (9)
  • 6.7 mm (9)
  • 6.801 mm (9)
  • 6.9 mm (9)
  • 7.0 mm (9)
  • 7.101 mm (9)
  • 7.2 mm (8)
  • 7.301 mm (8)
  • 7.4 mm (9)
  • 7.5 mm (9)
  • 7.801 mm (9)
  • 7.9 mm (8)
  • 8.0 mm (9)
  • 8.1 mm (9)
  • 8.201 mm (9)
  • 8.3 mm (8)
  • 8.4 mm (8)
  • 8.5 mm (9)
  • 8.6 mm (9)
  • 8.701 mm (9)
  • 8.8 mm (9)
  • 8.9 mm (8)
  • 9.0 mm (9)
  • 9.3 mm (9)
  • 9.5 mm (9)
  • 9.701 mm (9)
  • 9.8 mm (9)
  • 10.0 mm (10)
  • 10.201 mm (9)
  • 10.3 mm (9)
  • 10.4 mm (9)
  • 10.5 mm (9)
  • 10.601 mm (9)
  • 10.8 mm (9)
  • 11.0 mm (9)
  • 11.201 mm (9)
  • 11.4 mm (9)
  • 11.5 mm (14)
  • 11.601 mm (9)
  • 11.701 mm (9)
  • 11.8 mm (9)
  • 11.9 mm (13)
  • 12.0 mm (9)
  • 12.201 mm (9)
  • 12.3 mm (14)
  • 12.4 mm (9)
  • 12.5 mm (9)
  • 12.701 mm (9)
  • 13.0 mm (9)
  • 13.101 mm (13)
  • 13.3 mm (9)
  • 13.5 mm (9)
  • 13.9 mm (12)
  • 14.0 mm (9)
  • 14.101 mm (9)
  • 14.3 mm (12)
  • 14.5 mm (9)
  • 15.0 mm (9)
  • 16.0 mm (9)
  • 17.0 mm (9)
  • 17.5 mm (9)
  • 18.0 mm (9)
  • 19.0 mm (9)
  • 20.0 mm (9)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (22)
  • 9.0 mm (10)
  • 10.0 mm (21)
  • 12.0 mm (33)
  • 14.0 mm (53)
  • 15.0 mm (5)
  • 17.0 mm (80)
  • 20.0 mm (67)
  • 22.0 mm (5)
  • 23.0 mm (46)
  • 24.0 mm (44)
  • 25.0 mm (18)
  • 29.0 mm (95)
  • 30.0 mm (1)
  • 33.0 mm (14)
  • 35.0 mm (156)
  • 40.0 mm (86)
  • 41.0 mm (16)
  • 43.0 mm (169)
  • 45.0 mm (72)
  • 48.0 mm (21)
  • 49.0 mm (89)
  • 51.0 mm (61)
  • 55.0 mm (57)
  • 56.0 mm (85)
  • 57.0 mm (14)
  • 60.0 mm (75)
  • 63.0 mm (78)
  • 64.0 mm (13)
  • 71.0 mm (68)
  • 77.0 mm (57)
  • 80.0 mm (28)
  • 96.0 mm (25)
  • 112.0 mm (23)
  • 128.0 mm (25)
  • 144.0 mm (19)
  • 160.0 mm (17)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (22)
  • 0.354 in (10)
  • 0.394 in (21)
  • 0.473 in (33)
  • 0.551 in (53)
  • 0.591 in (5)
  • 0.669 in (80)
  • 0.787 in (67)
  • 0.866 in (5)
  • 0.906 in (46)
  • 0.946 in (44)
  • 0.984 in (18)
  • 1.143 in (95)
  • 1.181 in (1)
  • 1.299 in (14)
  • 1.379 in (156)
  • 1.575 in (86)
  • 1.614 in (16)
  • 1.693 in (169)
  • 1.772 in (72)
  • 1.891 in (21)
  • 1.929 in (89)
  • 2.008 in (61)
  • 2.165 in (57)
  • 2.205 in (85)
  • 2.244 in (14)
  • 2.362 in (75)
  • 2.48 in (78)
  • 2.52 in (13)
  • 2.795 in (68)
  • 3.031 in (57)
  • 3.15 in (28)
  • 3.781 in (25)
  • 4.409 in (23)
  • 5.039 in (25)
  • 5.67 in (19)
  • 6.299 in (17)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (22)
  • 0.473 in (21)
  • 0.512 in (10)
  • 0.669 in (33)
  • 0.709 in (15)
  • 0.787 in (43)
  • 0.866 in (32)
  • 0.946 in (48)
  • 1.024 in (5)
  • 1.102 in (113)
  • 1.181 in (18)
  • 1.339 in (44)
  • 1.417 in (52)
  • 1.496 in (1)
  • 1.575 in (14)
  • 1.614 in (43)
  • 1.732 in (67)
  • 1.85 in (89)
  • 1.929 in (16)
  • 2.087 in (90)
  • 2.165 in (86)
  • 2.205 in (21)
  • 2.362 in (79)
  • 2.402 in (89)
  • 2.559 in (72)
  • 2.638 in (14)
  • 2.795 in (85)
  • 2.874 in (61)
  • 2.914 in (13)
  • 3.031 in (75)
  • 3.11 in (57)
  • 3.269 in (78)
  • 3.622 in (28)
  • 3.661 in (68)
  • 3.976 in (57)
  • 4.331 in (25)
  • 5.039 in (23)
  • 5.748 in (25)
  • 6.417 in (19)
  • 7.126 in (17)
Reach Min to Reach Max
Reach
Reach
  • 7.0 mm (13)
  • 9.0 mm (22)
  • 12.0 mm (21)
  • 13.0 mm (10)
  • 17.0 mm (33)
  • 18.0 mm (15)
  • 20.0 mm (43)
  • 22.0 mm (32)
  • 24.0 mm (48)
  • 26.0 mm (5)
  • 28.0 mm (113)
  • 30.0 mm (18)
  • 34.0 mm (44)
  • 36.0 mm (52)
  • 38.0 mm (1)
  • 40.0 mm (14)
  • 41.0 mm (43)
  • 44.0 mm (67)
  • 47.0 mm (89)
  • 49.0 mm (16)
  • 53.0 mm (90)
  • 55.0 mm (86)
  • 56.0 mm (21)
  • 60.0 mm (79)
  • 61.0 mm (89)
  • 65.0 mm (72)
  • 67.0 mm (14)
  • 71.0 mm (85)
  • 73.0 mm (61)
  • 74.0 mm (13)
  • 77.0 mm (75)
  • 79.0 mm (57)
  • 83.0 mm (78)
  • 92.0 mm (28)
  • 93.0 mm (68)
  • 101.0 mm (57)
  • 110.0 mm (25)
  • 128.0 mm (23)
  • 146.0 mm (25)
  • 163.0 mm (19)
  • 181.0 mm (17)
Reach Min to Reach Max
Connection Style
Connection Style
  • Straight-Cylindrical (1274)
  • Whistle Notch 2 CylindricalEnd (507)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • TiN (1780)
backEnd
Back-End Diameter
Back-End Diameter
  • 4.0 mm (168)
  • 6.0 mm (375)
  • 8.0 mm (205)
  • 10.0 mm (206)
  • 12.0 mm (196)
  • 14.0 mm (177)
  • 16.0 mm (175)
  • 18.0 mm (148)
  • 20.0 mm (131)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.157 in (168)
  • 0.237 in (375)
  • 0.315 in (205)
  • 0.394 in (206)
  • 0.473 in (196)
  • 0.551 in (177)
  • 0.63 in (175)
  • 0.709 in (148)
  • 0.787 in (131)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Wiertła monolityczne z węglika spiekanego

GOdrill™ • Szeroki zakres materiałów obrabianych
(256 Products)
  • Shank - Cylindrical Plain ≤h6Shank - Cylindrical Plain ≤h6
  • DIN number 6535DIN number 6535
  • DrillingDrilling
  • Flood Coolant: DrillingFlood Coolant: Drilling
  • Shank - Cylindrical Whistle Notch 2°Shank - Cylindrical Whistle Notch 2°
  • Helix Angle: 30°Helix Angle: 30°
  • DIN number 6537DIN number 6537
  • Drilling: Stacked PlatesDrilling: Stacked Plates
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4150799 B042A15000CPG B042A15000CPG KC7325   15.0000 .5906 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.5900 .1020 48.0 1.889 16.0 .6299
    List price:
    $194.51 /each.
    Your price::
    4150800 B042A15083CPG B042A15083CPG KC7325   15.0830 .5938 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6100 .1028 48.0 1.889 16.0 .6299
      List price:
      $206.17 /each.
      Your price::
      4150801 B042A15100CPG B042A15100CPG KC7325   15.1000 .5945 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6100 .1028 48.0 1.889 16.0 .6299
        List price:
        $206.17 /each.
        Your price::
        4150803 B042A15300CPG B042A15300CPG KC7325   15.3000 .6024 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6400 .1039 48.0 1.889 16.0 .6299
          List price:
          $206.17 /each.
          Your price::
          4150805 B042A15479CPG B042A15479CPG KC7325   15.4790 .6094 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6800 .1055 48.0 1.889 16.0 .6299
            List price:
            $206.17 /each.
            Your price::
            4150806 B042A15500CPG B042A15500CPG KC7325   15.5000 .6102 133.0000 5.236 83.0000 3.267 63.0000 2.480 2.6800 .1055 48.0 1.889 16.0 .6299
              List price:
              $206.17 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              Wiertła monolityczne z węglika spiekanego

              GOdrill™ • Szeroki zakres materiałów obrabianych • Wewnętrzne doprowadzanie chłodziwa
              (252 Products)
              • DrillingDrilling
              • Shank - Cylindrical Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: 30°Helix Angle: 30°
              • DIN number 6537DIN number 6537
              • DIN number 6535DIN number 6535
              • Drilling - Through CoolantDrilling - Through Coolant
              • Shank - Cylindrical Whistle Notch 2°Shank - Cylindrical Whistle Notch 2°
              • Drilling: Stacked PlatesDrilling: Stacked Plates
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4148475 B051A18000CPG B051A18000CPG KC7325   18.0000 .7087 123.0000 4.842 73.0000 2.874 51.0000 2.007 3.1200 .1228 48.0 1.889 18.0 .7087
                List price:
                $332.31 /each.
                Your price::
                4148476 B051A18100CPG B051A18100CPG KC7325   18.1000 .7126 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.1400 .1236 50.0 1.968 20.0 .7874
                  List price:
                  $384.25 /each.
                  Your price::
                  4148477 B051A18200CPG B051A18200CPG KC7325   18.2000 .7165 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.1600 .1244 50.0 1.968 20.0 .7874
                    List price:
                    $384.25 /each.
                    Your price::
                    4148481 B051A18500CPG B051A18500CPG KC7325   18.5000 .7283 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.2100 .1264 50.0 1.968 20.0 .7874
                      List price:
                      $384.25 /each.
                      Your price::
                      4148588 B051A19050CPG B051A19050CPG KC7325   19.0500 .7500 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.3100 .1303 50.0 1.968 20.0 .7874
                        List price:
                        $387.96 /each.
                        Your price::
                        4148598 B051A20000CPG B051A20000CPG KC7325   20.0000 .7874 131.0000 5.157 79.0000 3.110 55.0000 2.165 3.4800 .1370 50.0 1.968 20.0 .7874
                          List price:
                          $387.96 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance

                          ORIGINAL PRODUCT

                          Wiertła monolityczne z węglika spiekanego

                          GOdrill™ • Szeroki zakres materiałów obrabianych • Wewnętrzne doprowadzanie chłodziwa
                          (252 Products)
                          • DIN number 6537DIN number 6537
                          • DrillingDrilling
                          • Shank - Cylindrical Plain ≤h6Shank - Cylindrical Plain ≤h6
                          • Shank - Cylindrical Whistle Notch 2°Shank - Cylindrical Whistle Notch 2°
                          • Drilling - Through CoolantDrilling - Through Coolant
                          • Helix Angle: 30°Helix Angle: 30°
                          • DIN number 6535DIN number 6535
                          • Drilling: Stacked PlatesDrilling: Stacked Plates
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L] Overall Length [L] Overall Length [L3] Flute Length [L3] Flute Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L5] Drill Point Length [L5] Drill Point Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
                          4149203 B052A04600CPG B052A04600CPG KC7325   4.6000 .1811 74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7600 .0299 36.0 1.417 6.0 .2362
                            List price:
                            $82.79 /each.
                            Your price::
                            4149204 B052A04623CPG B052A04623CPG KC7325   4.6230 .1820 74.0000 2.913 36.0000 1.417 29.0000 1.141 0.7600 .0299 36.0 1.417 6.0 .2362
                              List price:
                              $82.79 /each.
                              Your price::
                              4149205