wiertła składane

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2124)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2121)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (2121)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (2122)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (2122)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (2121)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (2105)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (2105)
  • M Stainless Steel (2073)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (2073)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (2073)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (2063)
  • K Cast Iron (2022)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (2022)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (2022)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (2022)
  • N Non-Ferrous Materials (2021)
    • N1
      Wrought Aluminum (2021)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (2021)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (2007)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (2009)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2015)
    • N6
      Carbon, Graphite Composites, CFRP (1930)
    • N7
      MMC's (1098)
  • S High-Temp Alloys (2056)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (2044)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (2044)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (2056)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (2056)
  • H Hardened Materials (852)
    • H1
      Hardened Materials 44-48 HRC (852)
    • H2
      Hardened Materials 48-55 HRC (852)
    • H3
      Hardened Materials 56-60 HRC (852)
    • H4
      Hardened Materials >60 HRC (852)
Select First Choice
  • BR (71)
  • CN (275)
  • DE (275)
  • GB (164)
  • IN (70)
  • SG (102)
  • US (366)
Applications
Applications
  • Chain Drilling Chain Drilling (90)
  • Convex Drilling Convex Drilling (1007)
  • Corner Drilling 45° Corner Drilling 45° (90)
  • Cross Hole Drilling Cross Hole Drilling (90)
  • Drilling Drilling (1616)
  • Flat Bottom Drilling Flat Bottom Drilling (584)
  • Half Cylindrical Drilling Half Cylindrical Drilling (90)
  • Inclined Entry Drilling Inclined Entry Drilling (1044)
  • Inclined Exit Drilling Inclined Exit Drilling (1044)
  • Stacked Plates Drilling Stacked Plates Drilling (584)
  • X-Offset Drilling X-Offset Drilling (1020)
Cutting Diameter
Cutting Diameter
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.473 in (4)
  • 0.492 in (11)
  • 0.5 in (15)
  • 0.512 in (9)
  • 0.531 in (17)
  • 0.551 in (19)
  • 0.564 in (12)
  • 0.572 in (15)
  • 0.591 in (20)
  • 0.595 in (11)
  • 0.61 in (14)
  • 0.625 in (18)
  • 0.63 in (20)
  • 0.65 in (15)
  • 0.656 in (15)
  • 0.669 in (21)
  • 0.687 in (2)
  • 0.689 in (15)
  • 0.69 in (16)
  • 0.704 in (14)
  • 0.709 in (19)
  • 0.728 in (16)
  • 0.734 in (14)
  • 0.748 in (20)
  • 0.75 in (20)
  • 0.768 in (16)
  • 0.781 in (13)
  • 0.787 in (23)
  • 0.807 in (8)
  • 0.814 in (18)
  • 0.828 in (21)
  • 0.845 in (15)
  • 0.846 in (4)
  • 0.866 in (20)
  • 0.875 in (23)
  • 0.886 in (4)
  • 0.906 in (34)
  • 0.925 in (4)
  • 0.937 in (2)
  • 0.939 in (16)
  • 0.946 in (19)
  • 0.965 in (4)
  • 0.969 in (16)
  • 0.984 in (34)
  • 1.0 in (33)
  • 1.004 in (4)
  • 1.024 in (16)
  • 1.031 in (11)
  • 1.032 in (1)
  • 1.043 in (12)
  • 1.063 in (31)
  • 1.094 in (11)
  • 1.102 in (16)
  • 1.125 in (18)
  • 1.143 in (19)
  • 1.156 in (12)
  • 1.158 in (4)
  • 1.181 in (20)
  • 1.187 in (1)
  • 1.188 in (12)
  • 1.219 in (12)
  • 1.22 in (17)
  • 1.25 in (21)
  • 1.26 in (16)
  • 1.281 in (8)
  • 1.282 in (1)
  • 1.299 in (16)
  • 1.313 in (16)
  • 1.339 in (15)
  • 1.375 in (21)
  • 1.379 in (14)
  • 1.407 in (8)
  • 1.417 in (14)
  • 1.437 in (2)
  • 1.438 in (14)
  • 1.457 in (15)
  • 1.469 in (11)
  • 1.476 in (4)
  • 1.496 in (15)
  • 1.5 in (23)
  • 1.532 in (10)
  • 1.536 in (15)
  • 1.563 in (16)
  • 1.575 in (16)
  • 1.614 in (11)
  • 1.625 in (18)
  • 1.655 in (11)
  • 1.657 in (10)
  • 1.687 in (2)
  • 1.688 in (11)
  • 1.693 in (12)
  • 1.732 in (11)
  • 1.75 in (14)
  • 1.772 in (16)
  • 1.811 in (11)
  • 1.813 in (13)
  • 1.85 in (10)
  • 1.875 in (14)
  • 1.891 in (11)
  • 1.929 in (11)
  • 1.937 in (1)
  • 1.938 in (10)
  • 1.969 in (11)
  • 1.988 in (2)
  • 2.0 in (20)
  • 2.008 in (9)
  • 2.047 in (11)
  • 2.087 in (8)
  • 2.125 in (19)
  • 2.126 in (10)
  • 2.165 in (10)
  • 2.205 in (5)
  • 2.244 in (5)
  • 2.25 in (9)
  • 2.283 in (6)
  • 2.323 in (5)
  • 2.362 in (5)
  • 2.375 in (8)
  • 2.402 in (5)
  • 2.441 in (5)
  • 2.48 in (7)
  • 2.5 in (9)
  • 2.52 in (5)
  • 2.559 in (5)
  • 2.598 in (1)
  • 2.638 in (1)
  • 2.677 in (2)
  • 2.717 in (1)
  • 2.75 in (1)
  • 2.757 in (1)
  • 2.795 in (1)
  • 2.835 in (1)
  • 2.874 in (2)
  • 2.914 in (1)
  • 2.953 in (1)
  • 2.992 in (1)
  • 3.0 in (1)
  • 3.031 in (1)
  • 3.071 in (3)
  • 3.11 in (1)
  • 3.15 in (1)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (1)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 12.0 mm (4)
  • 12.5 mm (11)
  • 12.701 mm (15)
  • 13.0 mm (9)
  • 13.476 mm (7)
  • 13.5 mm (10)
  • 14.0 mm (19)
  • 14.3 mm (12)
  • 14.5 mm (15)
  • 15.0 mm (20)
  • 15.101 mm (11)
  • 15.5 mm (14)
  • 15.875 mm (18)
  • 16.0 mm (20)
  • 16.5 mm (15)
  • 16.651 mm (15)
  • 17.0 mm (21)
  • 17.45 mm (2)
  • 17.475 mm (15)
  • 17.5 mm (16)
  • 17.85 mm (14)
  • 18.0 mm (19)
  • 18.5 mm (16)
  • 18.651 mm (14)
  • 19.0 mm (20)
  • 19.05 mm (20)
  • 19.5 mm (16)
  • 19.826 mm (12)
  • 19.85 mm (1)
  • 20.0 mm (23)
  • 20.5 mm (8)
  • 20.651 mm (18)
  • 21.0 mm (21)
  • 21.451 mm (15)
  • 21.5 mm (4)
  • 22.0 mm (20)
  • 22.225 mm (23)
  • 22.5 mm (4)
  • 23.0 mm (34)
  • 23.5 mm (4)
  • 23.8 mm (2)
  • 23.826 mm (16)
  • 24.0 mm (19)
  • 24.5 mm (4)
  • 24.625 mm (16)
  • 25.0 mm (34)
  • 25.401 mm (33)
  • 25.5 mm (4)
  • 26.0 mm (16)
  • 26.175 mm (11)
  • 26.201 mm (1)
  • 26.5 mm (12)
  • 27.0 mm (31)
  • 27.8 mm (11)
  • 28.0 mm (16)
  • 28.576 mm (18)
  • 29.0 mm (19)
  • 29.35 mm (12)
  • 29.401 mm (4)
  • 30.0 mm (20)
  • 30.151 mm (1)
  • 30.175 mm (12)
  • 30.951 mm (3)
  • 30.975 mm (9)
  • 31.0 mm (17)
  • 31.75 mm (21)
  • 32.0 mm (16)
  • 32.525 mm (8)
  • 32.551 mm (1)
  • 33.0 mm (16)
  • 33.35 mm (16)
  • 34.0 mm (15)
  • 34.926 mm (21)
  • 35.0 mm (14)
  • 35.7 mm (8)
  • 36.0 mm (14)
  • 36.5 mm (2)
  • 36.525 mm (14)
  • 37.0 mm (15)
  • 37.301 mm (2)
  • 37.325 mm (9)
  • 37.5 mm (4)
  • 38.0 mm (15)
  • 38.1 mm (23)
  • 38.875 mm (10)
  • 39.0 mm (15)
  • 39.7 mm (16)
  • 40.0 mm (16)
  • 41.0 mm (11)
  • 41.276 mm (18)
  • 42.0 mm (11)
  • 42.051 mm (10)
  • 42.85 mm (2)
  • 42.875 mm (11)
  • 43.0 mm (12)
  • 44.0 mm (11)
  • 44.45 mm (14)
  • 45.0 mm (16)
  • 46.0 mm (11)
  • 46.051 mm (13)
  • 47.0 mm (10)
  • 47.625 mm (14)
  • 48.0 mm (11)
  • 49.0 mm (11)
  • 49.2 mm (1)
  • 49.225 mm (10)
  • 50.0 mm (11)
  • 50.5 mm (2)
  • 50.801 mm (20)
  • 51.0 mm (9)
  • 52.0 mm (11)
  • 53.0 mm (8)
  • 53.975 mm (19)
  • 54.0 mm (10)
  • 55.0 mm (10)
  • 56.0 mm (5)
  • 57.0 mm (5)
  • 57.151 mm (9)
  • 58.0 mm (6)
  • 59.0 mm (5)
  • 60.0 mm (5)
  • 60.325 mm (8)
  • 61.0 mm (5)
  • 62.0 mm (5)
  • 63.0 mm (7)
  • 63.5 mm (9)
  • 64.0 mm (5)
  • 65.0 mm (5)
  • 66.0 mm (1)
  • 67.0 mm (1)
  • 68.0 mm (2)
  • 69.0 mm (1)
  • 69.851 mm (1)
  • 70.0 mm (1)
  • 71.0 mm (1)
  • 72.0 mm (1)
  • 73.0 mm (2)
  • 74.0 mm (1)
  • 75.0 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (1)
  • 77.0 mm (1)
  • 78.0 mm (3)
  • 79.0 mm (1)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 82.0 mm (1)
  • 82.551 mm (1)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (333)
  • Stable (456)
  • Unstable (382)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.0 mm (2)
  • 9.601 mm (1)
  • 10.0 mm (2)
  • 11.3 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 26.0 mm (2)
  • 26.975 mm (1)
  • 27.0 mm (3)
  • 28.0 mm (5)
  • 28.6 mm (3)
  • 29.0 mm (4)
  • 30.0 mm (4)
  • 30.175 mm (2)
  • 31.0 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (5)
  • 33.0 mm (4)
  • 33.325 mm (2)
  • 34.0 mm (5)
  • 34.95 mm (3)
  • 35.0 mm (4)
  • 35.7 mm (2)
  • 36.0 mm (5)
  • 37.0 mm (4)
  • 37.275 mm (2)
  • 37.5 mm (4)
  • 38.0 mm (4)
  • 38.1 mm (9)
  • 38.401 mm (6)
  • 39.0 mm (8)
  • 39.676 mm (2)
  • 40.0 mm (4)
  • 40.45 mm (3)
  • 40.5 mm (3)
  • 40.651 mm (2)
  • 41.0 mm (2)
  • 41.301 mm (3)
  • 41.651 mm (2)
  • 42.0 mm (10)
  • 42.875 mm (2)
  • 42.901 mm (6)
  • 43.0 mm (1)
  • 43.5 mm (5)
  • 44.0 mm (4)
  • 44.45 mm (5)
  • 44.7 mm (2)
  • 45.0 mm (7)
  • 45.25 mm (2)
  • 45.276 mm (3)
  • 46.0 mm (4)
  • 46.026 mm (2)
  • 46.5 mm (5)
  • 46.6 mm (2)
  • 47.0 mm (1)
  • 47.625 mm (9)
  • 47.651 mm (3)
  • 48.0 mm (11)
  • 48.5 mm (3)
  • 48.7 mm (3)
  • 48.901 mm (6)
  • 49.0 mm (3)
  • 49.225 mm (2)
  • 49.5 mm (4)
  • 49.776 mm (1)
  • 49.975 mm (5)
  • 50.0 mm (9)
  • 50.801 mm (8)
  • 51.0 mm (7)
  • 51.551 mm (2)
  • 52.0 mm (5)
  • 52.375 mm (2)
  • 52.426 mm (7)
  • 52.5 mm (5)
  • 53.0 mm (3)
  • 53.575 mm (5)
  • 53.6 mm (1)
  • 53.95 mm (2)
  • 53.975 mm (1)