Drill Fix DFR • Płytki
Filtry
Filtry
Wyświetl filtry w
MetryczneCalowe
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
- M Stainless Steel (24)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(24)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(24)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(24)
- K Cast Iron (18)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(18)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(18)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(18)
- N Non-Ferrous Materials (14)
- N1Wrought Aluminum (14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
- N6Carbon, Graphite Composites, CFRP (4)
- S High-Temp Alloys (24)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(24)
Select First Choice
- BR (6)
- CN (15)
- DE (15)
- GB (15)
- IN (3)
- SG (14)
- US (15)
Cutting Condition
Cutting Condition
- Interrupted (24)
- Stable (30)
- Unstable (30)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (1)
- 2.0 (29)
do
application
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7140 (9)
- KCMS35 (2)
- KCPK10 (3)
- KCU25 (6)
- KCU40 (9)
- KD1425 (1)
insertGeometry
Insert IC Size
Insert IC Size
- 6.0 mm(19)
- 8.0 mm(10)
do
Insert IC Size
Insert IC Size
- 0.237 in(19)
- 0.315 in(10)
do
Chip Breaker CBMD
Chip Breaker CBMD
- GD (12)
- LD (6)
- MD (11)
Cutting Tool Material
Cutting Tool Material
- D P (1)
- H W (29)
No filters matching ""