Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kennametal do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk

Rozwiercanie

Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (288)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (240)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (288)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (288)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (288)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (288)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (288)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (288)
  • M Stainless Steel (287)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (287)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (287)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (287)
  • K Cast Iron (264)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (264)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (264)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (264)
  • N Non-Ferrous Materials (69)
    • N1
      Wrought Aluminum (69)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (69)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (69)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (45)
  • S High-Temp Alloys (286)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (286)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (286)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (286)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (286)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (178)
  • Blind Hole Finishing Blind Hole Finishing (215)
  • Grooving Grooving (1)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (107)
  • Through Hole Finishing Through Hole Finishing (139)
Cutting Diameter
Cutting Diameter
  • 0.197 in (8)
  • 0.217 in (8)
  • 0.237 in (10)
  • 0.25 in (2)
  • 0.256 in (8)
  • 0.276 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.354 in (8)
  • 0.375 in (2)
  • 0.394 in (10)
  • 0.433 in (8)
  • 0.438 in (2)
  • 0.473 in (10)
  • 0.5 in (2)
  • 0.512 in (8)
  • 0.551 in (18)
  • 0.564 in (4)
  • 0.591 in (8)
  • 0.625 in (3)
  • 0.63 in (10)
  • 0.669 in (8)
  • 0.689 in (4)
  • 0.709 in (10)
  • 0.743 in (4)
  • 0.748 in (9)
  • 0.75 in (6)
  • 0.787 in (10)
  • 0.828 in (6)
  • 0.866 in (7)
  • 0.875 in (4)
  • 0.876 in (1)
  • 0.906 in (6)
  • 0.939 in (4)
  • 0.946 in (6)
  • 0.984 in (7)
  • 1.0 in (5)
  • 1.024 in (6)
  • 1.063 in (6)
  • 1.102 in (7)
  • 1.125 in (1)
  • 1.143 in (2)
  • 1.181 in (7)
  • 1.22 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.299 in (2)
  • 1.339 in (6)
  • 1.379 in (2)
  • 1.417 in (7)
  • 1.438 in (1)
  • 1.457 in (2)
  • 1.496 in (6)
  • 1.536 in (2)
  • 1.563 in (1)
  • 1.575 in (7)
  • 1.614 in (2)
  • 1.653 in (1)
  • 1.655 in (7)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (8)
  • 5.5 mm (8)
  • 6.0 mm (10)
  • 6.351 mm (2)
  • 6.5 mm (8)
  • 7.0 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.0 mm (8)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 11.0 mm (8)
  • 11.125 mm (2)
  • 12.0 mm (10)
  • 12.701 mm (2)
  • 13.0 mm (8)
  • 14.0 mm (18)
  • 14.3 mm (4)
  • 15.0 mm (8)
  • 15.875 mm (3)
  • 16.0 mm (10)
  • 17.0 mm (8)
  • 17.475 mm (4)
  • 18.0 mm (10)
  • 18.875 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (6)
  • 20.0 mm (10)
  • 21.0 mm (6)
  • 22.0 mm (7)
  • 22.225 mm (4)
  • 22.25 mm (1)
  • 23.0 mm (6)
  • 23.826 mm (4)
  • 24.0 mm (6)
  • 25.0 mm (7)
  • 25.401 mm (5)
  • 26.0 mm (6)
  • 27.0 mm (6)
  • 28.0 mm (7)
  • 28.576 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (7)
  • 31.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 33.0 mm (2)
  • 34.0 mm (6)
  • 35.0 mm (2)
  • 36.0 mm (7)
  • 36.525 mm (1)
  • 37.0 mm (2)
  • 38.0 mm (6)
  • 39.0 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (7)
  • 41.0 mm (2)
  • 41.95 mm (1)
  • 42.0 mm (7)
Cutting Diameter Min do Cutting Diameter Max
Reach
Reach
  • 0.968 in (1)
  • 1.01 in (1)
  • 1.045 in (1)
  • 1.969 in (1)
  • 2.045 in (1)
Reach Min do Reach Max
Reach
Reach
  • 24.576 mm (1)
  • 25.625 mm (1)
  • 26.55 mm (1)
  • 50.0 mm (1)
  • 51.95 mm (1)
Reach Min do Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (5)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (140)
  • Whistle Notch 2 (3)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (1)
  • 4 (64)
  • 6 (178)
  • 8 (88)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (3)
  • 4.0 (66)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.875 in (2)
  • 3.976 in (1)
  • 4.875 in (2)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 98.426 mm (2)
  • 101.0 mm (1)
  • 123.825 mm (2)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (1)
  • 0.016 in (3)
  • 0.02 in (2)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (1)
  • 0.4 mm (3)
  • 0.5 mm (2)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (76)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (76)
Corner Chamfer Min do Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K605 (24)
  • KB1610 (2)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC6005 (76)
  • KC6105 (17)
  • KC6305 (97)
  • KCU05 (72)
  • KCU05A (48)
  • KCU45 (7)
  • KD1415 (49)
  • KT6215 (1)
  • KT6225 (1)
  • KT6315 (2)
Hand Of Tool
Hand Of Tool
  • R (335)
Wiper Insert
Wiper Insert
  • N (71)
Helix Hand
Helix Hand
  • L (118)
  • N (187)
  • R (25)
Lead in Length
Lead in Length
  • 0.2 mm (45)
  • 0.301 mm (6)
  • 0.4 mm (26)
  • 0.5 mm (110)
  • 0.601 mm (12)
  • 0.701 mm (5)
  • 0.75 mm (6)
  • 0.8 mm (3)
  • 0.9 mm (4)
  • 0.951 mm (10)
  • 1.1 mm (95)
  • 1.151 mm (8)
Lead in Length Min do Lead in Length Max
Lead In Length
Lead In Length
  • 0.0 in (51)
  • 0.001 in (165)
  • 0.002 in (113)
  • 0.038 in (1)
Lead In Length Min do Lead In Length Max
frontEnd
Cutting Width
Cutting Width
  • 0.119 in (1)
  • 0.125 in (1)
Cutting Width Min do Cutting Width Max
Cutting Width
Cutting Width
  • 3.0 mm (1)
  • 3.176 mm (1)
Cutting Width Min do Cutting Width Max
Insert Shape
Insert Shape
  • GROOVING/CUTOFF MISC (7)
  • L-RECTANGLE 90 (3)
  • S-SQUARE 90 (66)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.039 in (5)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.0 mm (5)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.969 in (1)
  • 2.362 in (4)
  • 2.402 in (1)
  • 2.48 in (4)
  • 2.598 in (2)
  • 2.677 in (1)
  • 2.757 in (1)
  • 3.543 in (3)
  • 3.583 in (1)
  • 3.898 in (1)
  • 3.938 in (5)
  • 4.094 in (1)
  • 4.173 in (1)
  • 4.469 in (2)
  • 4.529 in (1)
  • 4.843 in (1)
  • 5.021 in (1)
  • 5.138 in (2)
  • 5.315 in (1)
  • 5.748 in (1)
  • 6.005 in (2)
  • 6.083 in (1)
  • 6.24 in (2)
  • 6.851 in (2)
  • 7.303 in (2)
  • 7.48 in (2)
  • 8.563 in (2)
  • 9.803 in (2)
  • 10.787 in (2)
Gage Length
Gage Length
  • 100 mm (5)
  • 60 mm (4)
  • 63 mm (4)
  • 90 mm (3)
  • 174 mm (2)
  • 190 mm (2)
  • 249 mm (2)
  • 274 mm (2)
  • 66 mm (2)
  • 104 mm (1)
  • 106 mm (1)
  • 115 mm (1)
  • 123 mm (1)
  • 135 mm (1)
  • 146 mm (1)
  • 50 mm (1)
  • 61 mm (1)
  • 68 mm (1)
  • 70 mm (1)
  • 91 mm (1)
  • 99 mm (1)
  • 113.5 mm (2)
  • 127.5 mm (1)
  • 130.5 mm (2)
  • 152.5 mm (2)
  • 154.5 mm (1)
  • 158.5 mm (2)
  • 185.5 mm (2)
  • 217.5 mm (2)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • GROOVING/CUTOFF MISC (2)
  • L-RECTANGLE 90 (3)
  • S-SQUARE 90 (66)
Insert IC Size
Insert IC Size
  • 6.0 mm (31)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (29)
Insert IC Size Min do Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.237 in (31)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (29)
Insert IC Size Min do Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.0 mm (5)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (4)
  • 9.05 mm (1)
  • 14.476 mm (1)
  • 27.0 mm (1)
  • 45.0 mm (1)
Cutting Edge Length Min do Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.237 in (5)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (4)
  • 0.356 in (1)
  • 0.571 in (1)
  • 1.063 in (1)
  • 1.772 in (1)
Cutting Edge Length Min do Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • FB (1)
  • FT (2)
  • S (10)
Cutting Tool Material
Cutting Tool Material
  • B H (12)
  • D P (4)
  • H T (3)
  • H W (52)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (143)
  • SHORT TAPER (192)
System Size
System Size
  • BT40 (1)
  • BT50 (2)
  • CV40 (1)
  • CV50 (2)
  • DV40 (1)
  • DV50 (2)
  • HSK100A (2)
  • HSK63A (2)
  • HSK80A (1)
  • SIF100 (3)
  • SIF70 (6)
  • SIF80 (3)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (26)
  • 6.351 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (26)
  • 9.525 mm (2)
  • 10.0 mm (18)
  • 11.101 mm (2)
  • 11.5 mm (16)
  • 12.0 mm (18)
  • 12.701 mm (2)
  • 13.5 mm (16)
  • 14.0 mm (18)
  • 15.5 mm (17)
  • 15.875 mm (2)
  • 16.0 mm (8)
  • 17.5 mm (26)
  • 18.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (66)
  • 25.0 mm (35)
  • 30.0 mm (20)
  • 32.0 mm (8)
  • 35.0 mm (26)
  • 37.5 mm (5)
  • 44.45 mm (3)
  • 57.5 mm (3)
  • 63.0 mm (2)
  • 69.851 mm (6)
  • 70.0 mm (4)
  • 80.0 mm (1)
  • 100.0 mm (2)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (26)
  • 0.25 in (2)
  • 0.313 in (2)
  • 0.315 in (26)
  • 0.375 in (2)
  • 0.394 in (18)
  • 0.437 in (2)
  • 0.453 in (16)
  • 0.473 in (18)
  • 0.5 in (2)
  • 0.531 in (16)
  • 0.551 in (18)
  • 0.61 in (17)
  • 0.625 in (2)
  • 0.63 in (8)
  • 0.69 in (26)
  • 0.709 in (2)
  • 0.75 in (3)
  • 0.787 in (66)
  • 0.984 in (35)
  • 1.181 in (20)
  • 1.26 in (8)
  • 1.379 in (26)
  • 1.476 in (5)
  • 1.75 in (3)
  • 2.265 in (3)
  • 2.48 in (2)
  • 2.75 in (6)
  • 2.757 in (4)
  • 3.15 in (1)
  • 3.938 in (2)
Back-End Diameter Min do Back-End Diameter Max