Romicron™

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (553)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (553)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (553)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (553)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (553)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (553)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (553)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (553)
  • M Stainless Steel (464)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (464)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (464)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (464)
  • K Cast Iron (338)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (337)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (337)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (337)
  • N Non-Ferrous Materials (212)
    • N1
      Wrought Aluminum (180)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (193)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (100)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (212)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (206)
    • N6
      Carbon, Graphite Composites, CFRP (186)
    • N7
      MMC's (109)
  • S High-Temp Alloys (434)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (433)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (433)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (433)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (403)
  • H Hardened Materials (104)
    • H1
      Hardened Materials 44-48 HRC (104)
    • H2
      Hardened Materials 48-55 HRC (104)
    • H3
      Hardened Materials 56-60 HRC (104)
    • H4
      Hardened Materials >60 HRC (104)
  • C CFRP Materials (194)
    • C1
      CFRP, CFRP / CFRP (186)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (108)
Select First Choice
  • IN (25)
  • US (1)
Applications
Applications
  • Blind Hole Finishing Blind Hole Finishing (56)
  • Boring Boring (2)
  • Facing Facing (2)
  • ID Facing ID Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • Profiling Profiling (1)
  • Through Hole Finishing Through Hole Finishing (56)
  • Turning Turning (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (176)
  • Lightly Interrupted Cut (302)
  • Smooth Cut (507)
  • Varying Depth of Cut (306)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (44)
  • 95.0 (2)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Whistle Notch 2 Front (12)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (36)
  • 2.0 (330)
  • 3.0 (210)
  • 4.0 (67)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.754 in (3)
  • 0.756 in (3)
  • 0.776 in (7)
  • 0.929 in (1)
  • 0.931 in (3)
  • 0.971 in (3)
  • 1.161 in (1)
  • 1.209 in (3)
  • 1.358 in (1)
  • 1.437 in (1)
  • 1.524 in (3)
  • 1.635 in (1)
  • 2.0 in (1)
  • 2.197 in (1)
  • 2.273 in (1)
  • 2.386 in (1)
  • 2.441 in (1)
  • 2.695 in (1)
  • 3.089 in (1)
  • 3.15 in (1)
  • 3.161 in (1)
  • 3.561 in (2)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 19.151 mm (3)
  • 19.201 mm (3)
  • 19.701 mm (7)
  • 23.6 mm (1)
  • 23.651 mm (3)
  • 24.651 mm (3)
  • 29.5 mm (1)
  • 30.701 mm (3)
  • 34.5 mm (1)
  • 36.5 mm (1)
  • 38.7 mm (3)
  • 41.5 mm (1)
  • 50.801 mm (1)
  • 55.801 mm (1)
  • 57.7 mm (1)
  • 60.6 mm (1)
  • 62.0 mm (1)
  • 68.45 mm (1)
  • 78.45 mm (1)
  • 80.0 mm (1)
  • 80.301 mm (1)
  • 90.45 mm (2)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (9)
  • 0.004 in (102)
  • 0.007 in (24)
  • 0.008 in (174)
  • 0.015 in (18)
  • 0.016 in (320)
  • 0.031 in (302)
  • 0.047 in (9)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (9)
  • 0.1 mm (102)
  • 0.176 mm (24)
  • 0.2 mm (174)
  • 0.375 mm (18)
  • 0.4 mm (320)
  • 0.8 mm (302)
  • 1.201 mm (9)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (651)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (651)
Corner Chamfer Min do Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00379 (3)
  • K313 (95)
  • K420 (2)
  • K68 (91)
  • KB1345 (11)
  • KB1610 (86)
  • KB1630 (11)
  • KB5610 (85)
  • KB5625 (10)
  • KB5630 (11)
  • KB9610 (10)
  • KBH10 (7)
  • KBH20 (91)
  • KC250 (85)
  • KC5010 (148)
  • KC5025 (126)
  • KC525M (1)
  • KC5410 (101)
  • KC710 (86)
  • KC720 (85)
  • KC725M (2)
  • KC730 (134)
  • KC7310 (84)
  • KC732 (85)
  • KC8050 (85)
  • KC810 (85)
  • KC850 (105)
  • KC9010 (85)
  • KC9025 (85)
  • KC910 (85)
  • KC9105 (85)
  • KC9110 (85)
  • KC9120 (85)
  • KC9125 (85)
  • KC9225 (85)
  • KC9240 (85)
  • KC9240NEW (85)
  • KC9315 (85)
  • KC9320 (85)
  • KC9325 (85)
  • KC935 (87)
  • KC950 (85)
  • KC990 (85)
  • KCD25 (85)
  • KCK05 (89)
  • KCK15 (95)
  • KCK15B (91)
  • KCK20 (101)
  • KCK20B (92)
  • KCM15 (90)
  • KCM15B (89)
  • KCM25 (97)
  • KCM25B (93)
  • KCM35 (1)
  • KCP05 (88)
  • KCP10 (94)
  • KCP10B (96)
  • KCP25 (108)
  • KCP25B (106)
  • KCP25C (130)
  • KCP30 (86)
  • KCPK05 (85)
  • KCPK30 (2)
  • KCS10 (100)
  • KCS10B (100)
  • KCU10 (121)
  • KCU10B (156)
  • KCU25 (108)
  • KCU25B (87)
  • KD050 (84)
  • KD081 (2)
  • KD100 (86)
  • KD105 (84)
  • KD120 (84)
  • KD1400 (100)
  • KD1405 (85)
  • KD1425 (99)
  • KT125 (85)
  • KT150 (85)
  • KT175 (85)
  • KT315 (108)
  • KTP10 (89)
  • KU10 (85)
  • KU10T (85)
  • KU30T (85)
  • SPM5F2 (2)
  • SPMQMA (10)
Hand Of Tool
Hand Of Tool
  • R (12)
Wiper Insert
Wiper Insert
  • N (592)
  • Y (31)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.0 mm (1)
  • 6.0 mm (2)
  • 8.5 mm (2)
  • 11.0 mm (2)
  • 13.5 mm (2)
  • 16.0 mm (1)
  • 19.0 mm (1)
  • 22.0 mm (1)
  • 25.0 mm (2)
  • 25.5 mm (1)
  • 29.5 mm (2)
  • 33.5 mm (1)
  • 34.0 mm (2)
  • 40.5 mm (1)
  • 42.0 mm (1)
  • 43.0 mm (1)
  • 45.5 mm (1)
  • 47.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (1)
  • 56.5 mm (1)
  • 60.0 mm (2)
  • 61.0 mm (1)
  • 65.0 mm (1)
  • 97.0 mm (1)
  • 100.0 mm (1)
  • 103.5 mm (1)
  • 110.0 mm (1)
  • 138.0 mm (3)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.157 in (1)
  • 0.237 in (2)
  • 0.335 in (2)
  • 0.433 in (2)
  • 0.531 in (2)
  • 0.63 in (1)
  • 0.748 in (1)
  • 0.866 in (1)
  • 0.984 in (2)
  • 1.004 in (1)
  • 1.161 in (2)
  • 1.319 in (1)
  • 1.339 in (2)
  • 1.594 in (1)
  • 1.655 in (1)
  • 1.693 in (1)
  • 1.792 in (1)
  • 1.85 in (1)
  • 1.929 in (1)
  • 1.969 in (1)
  • 2.047 in (1)
  • 2.224 in (1)
  • 2.362 in (2)
  • 2.402 in (1)
  • 2.559 in (1)
  • 3.819 in (1)
  • 3.938 in (1)
  • 4.075 in (1)
  • 4.331 in (1)
  • 5.433 in (3)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.276 in (1)
  • 0.354 in (1)
  • 0.374 in (1)
  • 0.453 in (1)
  • 0.473 in (1)
  • 0.551 in (1)
  • 0.572 in (1)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.768 in (1)
  • 0.886 in (1)
  • 1.004 in (1)
  • 1.319 in (1)
  • 1.713 in (1)
  • 2.559 in (1)
  • 3.938 in (1)
Maximum Axial Groove Diameter Min do Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 7.0 mm (1)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 11.5 mm (1)
  • 12.0 mm (1)
  • 14.0 mm (1)
  • 14.5 mm (1)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 19.5 mm (1)
  • 22.5 mm (1)
  • 25.5 mm (1)
  • 33.5 mm (1)
  • 43.5 mm (1)
  • 65.0 mm (1)
  • 100.0 mm (1)
Maximum Axial Groove Diameter Min do Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (2)
  • E (10)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (11)
Maximum Bore Depth
Maximum Bore Depth
  • 0.562 in (1)
  • 0.803 in (1)
  • 0.854 in (1)
  • 1.041 in (1)
  • 1.201 in (1)
  • 1.28 in (1)
  • 1.415 in (1)
  • 1.516 in (1)
  • 1.573 in (1)
  • 2.165 in (1)
  • 2.362 in (2)
Maximum Bore Depth Min do Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 14.275 mm (1)
  • 20.401 mm (1)
  • 21.701 mm (1)
  • 26.451 mm (1)
  • 30.5 mm (1)
  • 32.5 mm (1)
  • 35.95 mm (1)
  • 38.5 mm (1)
  • 39.95 mm (1)
  • 55.0 mm (1)
  • 60.0 mm (2)
Maximum Bore Depth Min do Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (4)
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (440)
  • T-TRIANGLE 60 (220)
Cartridge Size
Cartridge Size
  • 1A. (1)
  • 1B. (1)
  • 1C. (1)
  • 1D. (1)
  • 1E. (1)
  • 1F. (1)
  • 1L. (1)
  • 1Y (1)
  • 2A. (1)
  • 2B. (1)
  • 2C. (1)
  • 2D. (1)
  • 2E. (1)
  • 2F. (1)
  • 2L. (3)
  • 2Y (1)
  • 3A. (1)
  • 3B. (1)
  • 3C. (1)
  • 3D. (1)
  • 3E. (1)
  • 3F. (2)
  • 3L. (1)
  • 3X (1)
  • 3Y (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (1)
  • 0.177 in (1)
  • 0.187 in (1)
  • 0.226 in (1)
  • 0.237 in (1)
  • 0.276 in (1)
  • 0.286 in (1)
  • 0.325 in (1)
  • 0.335 in (1)
  • 0.384 in (1)
  • 0.443 in (1)
  • 0.502 in (1)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (1)
  • 4.5 mm (1)
  • 4.75 mm (1)
  • 5.75 mm (1)
  • 6.0 mm (1)
  • 7.0 mm (1)
  • 7.25 mm (1)
  • 8.25 mm (1)
  • 8.5 mm (1)
  • 9.75 mm (1)
  • 11.25 mm (1)
  • 12.75 mm (1)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.492 in (1)
  • 0.886 in (1)
  • 1.181 in (1)
  • 1.28 in (1)
  • 1.571 in (2)
  • 1.575 in (3)
  • 1.581 in (1)
  • 1.614 in (2)
  • 1.673 in (1)
  • 1.827 in (1)
  • 1.969 in (6)
  • 2.035 in (1)
  • 2.307 in (1)
  • 2.358 in (1)
  • 2.362 in (5)
  • 2.368 in (1)
  • 2.753 in (1)
  • 2.757 in (1)
  • 2.953 in (3)
  • 3.15 in (1)
  • 3.346 in (1)
  • 3.362 in (1)
  • 3.543 in (1)
  • 3.758 in (1)
  • 3.938 in (7)
  • 4.331 in (1)
  • 4.567 in (1)
  • 4.898 in (1)
  • 5.984 in (1)
Gage Length
Gage Length
  • 100 mm (7)
  • 50 mm (6)
  • 60 mm (5)
  • 40 mm (3)
  • 75 mm (3)
  • 41 mm (2)
  • 110 mm (1)
  • 116 mm (1)
  • 152 mm (1)
  • 30 mm (1)
  • 70 mm (1)
  • 80 mm (1)
  • 85 mm (1)
  • 90 mm (1)
  • 12.5 mm (1)
  • 22.5 mm (1)
  • 32.5 mm (1)
  • 39.901 mm (2)
  • 40.151 mm (1)
  • 42.5 mm (1)
  • 46.401 mm (1)
  • 51.7 mm (1)
  • 58.6 mm (1)
  • 59.901 mm (1)
  • 60.151 mm (1)
  • 69.9 mm (1)
  • 85.4 mm (1)
  • 95.45 mm (1)
  • 124.4 mm (1)
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (398)
  • T-TRIANGLE 60 (219)
Insert IC Size
Insert IC Size
  • 3.975 mm (45)
  • 5.551 mm (42)
  • 6.351 mm (256)
  • 9.525 mm (263)
  • 12.701 mm (6)
Insert IC Size Min do Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.156 in (45)
  • 0.219 in (42)
  • 0.25 in (256)
  • 0.375 in (263)
  • 0.5 in (6)
Insert IC Size Min do Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 4.025 mm (45)
  • 5.551 mm (4)
  • 5.65 mm (11)
  • 6.45 mm (154)
  • 9.625 mm (27)
  • 9.675 mm (180)
  • 10.951 mm (1)
  • 11.0 mm (101)
  • 12.9 mm (2)
  • 16.5 mm (83)
  • 22.0 mm (4)
Cutting Edge Length Min