Monolityczne wiertła HP z węglika spiekanego do wiercenia głębokich otworów

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (275)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (120)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (120)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (120)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (120)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (120)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (275)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (275)
  • M Stainless Steel (275)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (275)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (275)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (275)
  • K Cast Iron (120)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (120)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (120)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (120)
  • N Non-Ferrous Materials (149)
    • N1
      Wrought Aluminum (149)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (149)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (149)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (149)
  • S High-Temp Alloys (155)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (155)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (155)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (155)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (155)
Applications
Applications
  • Convex Drilling Convex Drilling (88)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Cross Hole Drilling Cross Hole Drilling (424)
  • Drilling Drilling (424)
  • Inclined Exit Drilling Inclined Exit Drilling (424)
  • Stacked Plates Drilling Stacked Plates Drilling (424)
Cutting Diameter
Cutting Diameter
  • 0.094 in (4)
  • 0.095 in (4)
  • 0.096 in (3)
  • 0.098 in (11)
  • 0.101 in (1)
  • 0.103 in (2)
  • 0.109 in (1)
  • 0.11 in (4)
  • 0.113 in (1)
  • 0.114 in (2)
  • 0.119 in (12)
  • 0.125 in (11)
  • 0.126 in (1)
  • 0.129 in (1)
  • 0.13 in (2)
  • 0.134 in (1)
  • 0.138 in (9)
  • 0.143 in (1)
  • 0.146 in (1)
  • 0.15 in (1)
  • 0.156 in (8)
  • 0.157 in (11)
  • 0.161 in (1)
  • 0.165 in (3)
  • 0.169 in (1)
  • 0.177 in (11)
  • 0.179 in (1)
  • 0.181 in (1)
  • 0.185 in (1)
  • 0.188 in (8)
  • 0.189 in (3)
  • 0.197 in (12)
  • 0.201 in (2)
  • 0.206 in (1)
  • 0.209 in (1)
  • 0.213 in (1)
  • 0.217 in (11)
  • 0.219 in (5)
  • 0.221 in (1)
  • 0.224 in (1)
  • 0.228 in (2)
  • 0.237 in (12)
  • 0.24 in (1)
  • 0.244 in (3)
  • 0.25 in (10)
  • 0.252 in (1)
  • 0.256 in (9)
  • 0.257 in (1)
  • 0.26 in (1)
  • 0.266 in (6)
  • 0.268 in (2)
  • 0.272 in (1)
  • 0.276 in (11)
  • 0.281 in (7)
  • 0.284 in (1)
  • 0.295 in (7)
  • 0.297 in (1)
  • 0.303 in (1)
  • 0.307 in (1)
  • 0.313 in (6)
  • 0.315 in (13)
  • 0.319 in (1)
  • 0.323 in (1)
  • 0.328 in (1)
  • 0.332 in (1)
  • 0.335 in (9)
  • 0.336 in (1)
  • 0.339 in (1)
  • 0.343 in (1)
  • 0.345 in (6)
  • 0.347 in (1)
  • 0.354 in (8)
  • 0.358 in (1)
  • 0.359 in (2)
  • 0.374 in (2)
  • 0.375 in (9)
  • 0.384 in (1)
  • 0.386 in (1)
  • 0.391 in (1)
  • 0.394 in (11)
  • 0.402 in (5)
  • 0.406 in (1)
  • 0.408 in (4)
  • 0.414 in (6)
  • 0.422 in (3)
  • 0.425 in (1)
  • 0.433 in (9)
  • 0.438 in (3)
  • 0.441 in (1)
  • 0.453 in (8)
  • 0.465 in (1)
  • 0.473 in (9)
  • 0.477 in (1)
  • 0.48 in (1)
  • 0.484 in (1)
  • 0.492 in (5)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.516 in (1)
  • 0.531 in (3)
  • 0.543 in (1)
  • 0.551 in (5)
  • 0.555 in (1)
  • 0.564 in (2)
  • 0.572 in (3)
  • 0.576 in (1)
  • 0.591 in (6)
  • 0.598 in (1)
  • 0.61 in (2)
  • 0.625 in (2)
  • 0.63 in (5)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.689 in (1)
  • 0.69 in (1)
  • 0.694 in (1)
  • 0.709 in (1)
  • 0.732 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.375 mm (4)
  • 2.401 mm (4)
  • 2.45 mm (3)
  • 2.5 mm (11)
  • 2.575 mm (1)
  • 2.6 mm (2)
  • 2.776 mm (1)
  • 2.801 mm (4)
  • 2.875 mm (1)
  • 2.901 mm (2)
  • 3.0 mm (12)
  • 3.176 mm (11)
  • 3.2 mm (1)
  • 3.276 mm (1)
  • 3.301 mm (2)
  • 3.401 mm (1)
  • 3.5 mm (9)
  • 3.6 mm (1)
  • 3.7 mm (1)
  • 3.801 mm (1)
  • 3.975 mm (8)
  • 4.0 mm (11)
  • 4.101 mm (1)
  • 4.2 mm (3)
  • 4.3 mm (1)
  • 4.5 mm (11)
  • 4.55 mm (1)
  • 4.601 mm (1)
  • 4.7 mm (1)
  • 4.775 mm (8)
  • 4.801 mm (3)
  • 5.0 mm (12)
  • 5.101 mm (2)
  • 5.2 mm (1)
  • 5.301 mm (1)
  • 5.4 mm (1)
  • 5.5 mm (11)
  • 5.551 mm (5)
  • 5.601 mm (1)
  • 5.7 mm (1)
  • 5.801 mm (2)
  • 6.0 mm (12)
  • 6.101 mm (1)
  • 6.2 mm (3)
  • 6.351 mm (10)
  • 6.4 mm (1)
  • 6.5 mm (9)
  • 6.525 mm (1)
  • 6.601 mm (1)
  • 6.75 mm (6)
  • 6.801 mm (2)
  • 6.9 mm (1)
  • 7.0 mm (11)
  • 7.15 mm (7)
  • 7.2 mm (1)
  • 7.5 mm (7)
  • 7.551 mm (1)
  • 7.7 mm (1)
  • 7.801 mm (1)
  • 7.95 mm (6)
  • 8.0 mm (13)
  • 8.1 mm (1)
  • 8.201 mm (1)
  • 8.326 mm (1)
  • 8.425 mm (1)
  • 8.5 mm (9)
  • 8.525 mm (1)
  • 8.6 mm (1)
  • 8.701 mm (1)
  • 8.725 mm (6)
  • 8.8 mm (1)
  • 9.0 mm (8)
  • 9.1 mm (1)
  • 9.125 mm (2)
  • 9.5 mm (2)
  • 9.525 mm (9)
  • 9.75 mm (1)
  • 9.8 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (11)
  • 10.201 mm (5)
  • 10.3 mm (1)
  • 10.326 mm (4)
  • 10.5 mm (6)
  • 10.726 mm (3)
  • 10.8 mm (1)
  • 11.0 mm (9)
  • 11.125 mm (3)
  • 11.201 mm (1)
  • 11.5 mm (8)
  • 11.8 mm (1)
  • 12.0 mm (9)
  • 12.101 mm (1)
  • 12.201 mm (1)
  • 12.3 mm (1)
  • 12.5 mm (5)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 13.101 mm (1)
  • 13.5 mm (3)
  • 13.8 mm (1)
  • 14.0 mm (5)
  • 14.101 mm (1)
  • 14.3 mm (2)
  • 14.5 mm (3)
  • 14.601 mm (1)
  • 15.0 mm (6)
  • 15.201 mm (1)
  • 15.5 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (5)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.475 mm (1)
  • 17.5 mm (1)
  • 17.6 mm (1)
  • 18.0 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
Cutting Diameter Min do Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 35.0 mm (3)
  • 36.0 mm (2)
  • 44.0 mm (14)
  • 45.0 mm (9)
  • 55.0 mm (2)
  • 56.0 mm (10)
  • 57.0 mm (3)
  • 58.0 mm (3)
  • 59.0 mm (3)
  • 60.0 mm (6)
  • 67.0 mm (1)
  • 69.0 mm (3)
  • 70.0 mm (3)
  • 71.0 mm (5)
  • 72.0 mm (3)
  • 73.0 mm (1)
  • 74.0 mm (4)
  • 75.0 mm (8)
  • 77.0 mm (2)
  • 79.0 mm (3)
  • 80.0 mm (4)
  • 81.0 mm (2)
  • 82.0 mm (2)
  • 83.0 mm (6)
  • 84.0 mm (3)
  • 89.0 mm (3)
  • 90.0 mm (6)
  • 94.0 mm (3)
  • 95.0 mm (3)
  • 96.0 mm (3)
  • 97.0 mm (2)
  • 99.0 mm (3)
  • 100.0 mm (5)
  • 103.0 mm (1)
  • 104.0 mm (6)
  • 105.0 mm (2)
  • 106.0 mm (4)
  • 112.0 mm (1)
  • 116.0 mm (2)
  • 117.0 mm (9)
  • 118.0 mm (8)
  • 119.0 mm (8)
  • 120.0 mm (11)
  • 125.0 mm (2)
  • 134.0 mm (4)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 137.0 mm (3)
  • 138.0 mm (2)
  • 140.0 mm (3)
  • 141.0 mm (5)
  • 142.0 mm (6)
  • 143.0 mm (2)
  • 144.0 mm (3)
  • 146.0 mm (1)
  • 147.0 mm (1)
  • 149.0 mm (3)
  • 150.0 mm (6)
  • 154.0 mm (3)
  • 157.0 mm (2)
  • 159.0 mm (3)
  • 160.0 mm (5)
  • 164.0 mm (5)
  • 165.0 mm (6)
  • 166.0 mm (3)
  • 167.0 mm (2)
  • 168.0 mm (2)
  • 169.0 mm (2)
  • 172.0 mm (2)
  • 173.0 mm (1)
  • 175.0 mm (2)
  • 177.0 mm (1)
  • 178.0 mm (5)
  • 179.0 mm (2)
  • 180.0 mm (7)
  • 187.0 mm (2)
  • 188.0 mm (2)
  • 189.0 mm (2)
  • 190.0 mm (2)
  • 191.0 mm (1)
  • 192.0 mm (2)
  • 194.0 mm (3)
  • 195.0 mm (3)
  • 197.0 mm (2)
  • 198.0 mm (1)
  • 199.0 mm (2)
  • 200.0 mm (6)
  • 202.0 mm (1)
  • 205.0 mm (1)
  • 209.0 mm (1)
  • 210.0 mm (4)
  • 213.0 mm (1)
  • 214.0 mm (2)
  • 215.0 mm (4)
  • 216.0 mm (1)
  • 217.0 mm (2)
  • 219.0 mm (3)
  • 220.0 mm (2)
  • 224.0 mm (2)
  • 225.0 mm (3)
  • 227.0 mm (2)
  • 228.0 mm (1)
  • 232.0 mm (1)
  • 234.0 mm (1)
  • 237.0 mm (3)
  • 238.0 mm (1)
  • 239.0 mm (2)
  • 240.0 mm (10)
  • 245.0 mm (1)
  • 250.0 mm (2)
  • 257.0 mm (2)
  • 258.0 mm (2)
  • 260.0 mm (2)
  • 262.0 mm (2)
  • 263.0 mm (2)
  • 267.0 mm (1)
  • 270.0 mm (1)
  • 274.0 mm (1)
  • 275.0 mm (1)
  • 280.0 mm (3)
  • 285.0 mm (1)
  • 292.0 mm (1)
  • 294.0 mm (1)
  • 297.0 mm (2)
  • 300.0 mm (6)
  • 307.0 mm (1)
  • 317.0 mm (1)
  • 318.0 mm (2)
  • 319.0 mm (1)
  • 320.0 mm (4)
  • 322.0 mm (1)
  • 330.0 mm (2)
  • 344.0 mm (1)
  • 347.0 mm (2)
  • 350.0 mm (1)
  • 352.0 mm (3)
  • 360.0 mm (3)
  • 375.0 mm (1)
  • 387.0 mm (2)
  • 400.0 mm (3)
  • 418.0 mm (3)
  • 422.0 mm (1)
  • 440.0 mm (1)
  • 450.0 mm (1)
Maximum Hole Depth [L4] Min do Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]