successfully added to cart
View Cart

Frezy z płytkami ceramicznymi

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (53)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (53)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (53)
  • M Stainless Steel (35)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (35)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (35)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (35)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
  • S High-Temp Alloys (76)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (73)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (76)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (76)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1)
  • H Hardened Materials (37)
    • H1
      Hardened Materials 44-48 HRC
      (37)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
Applications
  • Chamfer Milling Chamfer Milling (54)
  • Drilling Drilling (54)
  • Face Milling Face Milling (54)
  • Flat Bottom Drilling Flat Bottom Drilling (54)
  • ID Thread Turning ID Thread Turning (44)
  • Pipe Thread Pipe Thread (54)
  • Pocket Pocket (54)
  • Pocket Helical Pocket Helical (54)
  • Pocket Milling Pocket Milling (54)
  • Pocket Plunge Milling Pocket Plunge Milling (54)
  • Profile Milling Profile Milling (54)
  • Ramping Ramping (54)
  • Shoulder Ball Nose Shoulder Ball Nose (54)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (54)
  • Shoulder Milling Shoulder Milling (54)
  • Shoulder Roughing Shoulder Roughing (54)
  • Shoulder Square End Shoulder Square End (54)
  • Slot Ball Nose Slot Ball Nose (54)
  • Slot Milling Slot Milling (54)
  • Slot Side Slot Side (54)
  • Slot Square End Slot Square End (54)
  • Slot T Slot T (54)
  • Thread Milling Thread Milling (54)
  • Threading Threading (54)
Cutting Diameter
  • 9.525 (1)
  • 9.65 (1)
  • 10.5 (2)
  • 12.7 (1)
  • 13.65 (2)
  • 15.5 (2)
  • 15.875 (1)
  • 15.9 (1)
  • 19.05 (1)
  • 19.329 (2)
  • 19.46 (1)
  • 19.57 (1)
  • 25.4 (1)
  • 25.629 (1)
  • 25.64 (1)
  • 27.3 (2)
  • 27.45 (1)
  • 37.3 (3)
  • 37.417 (1)
  • 38.1 (2)
  • 38.12 (1)
  • 38.22 (2)
  • 50.3 (4)
  • 50.34 (1)
  • 50.79 (1)
  • 50.8 (2)
  • 50.87 (1)
  • 63.47 (1)
  • 63.5 (2)
  • 63.531 (1)
  • 67.3 (4)
  • 67.364 (1)
  • 87.3 (2)
  • 87.32 (1)
  • 88.85 (1)
  • 88.931 (1)
  • 112.3 (2)
  • 147.3 (2)
to
Cutting Diameter
  • 0.375 (1)
  • 0.3799 (1)
  • 0.412 (1)
  • 0.4134 (1)
  • 0.5 (1)
  • 0.537 (1)
  • 0.5374 (1)
  • 0.61 (1)
  • 0.6102 (1)
  • 0.625 (2)
  • 0.75 (1)
  • 0.761 (2)
  • 0.766 (1)
  • 0.77 (1)
  • 1.0 (1)
  • 1.009 (2)
  • 1.0748 (2)
  • 1.081 (1)
  • 1.4685 (3)
  • 1.473 (1)
  • 1.5 (2)
  • 1.501 (1)
  • 1.505 (2)
  • 1.9803 (4)
  • 1.982 (1)
  • 2.0 (3)
  • 2.003 (1)
  • 2.499 (1)
  • 2.5 (2)
  • 2.501 (1)
  • 2.6496 (3)
  • 2.65 (1)
  • 2.652 (1)
  • 3.437 (2)
  • 3.438 (1)
  • 3.498 (1)
  • 3.501 (1)
  • 4.4213 (2)
  • 5.7992 (2)
to
Cutting Length
  • 0.1181 (5)
  • 0.125 (5)
  • 0.187 (4)
  • 0.1875 (2)
  • 0.249 (25)
  • 0.25 (17)
to
Cutting Length
  • 3.0 (5)
  • 3.175 (2)
  • 3.18 (3)
  • 4.75 (4)
  • 4.76 (2)
  • 6.0 (6)
  • 6.32 (8)
  • 6.326 (6)
  • 6.33 (5)
  • 6.35 (17)
to
Cutting Condition
  • Smooth Cut (1)
Reach
  • 23.711 (1)
  • 23.969 (1)
  • 25.93 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 30.28 (1)
  • 31.0 (2)
  • 31.75 (1)
  • 35.0 (1)
  • 38.1 (1)
  • 39.0 (1)
  • 39.52 (1)
  • 40.9 (1)
  • 45.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 79.0 (1)
  • 88.9 (1)
to
Reach
  • 0.9335 (1)
  • 0.9436 (1)
  • 1.0209 (1)
  • 1.0236 (1)
  • 1.181 (2)
  • 1.1921 (1)
  • 1.2205 (2)
  • 1.25 (1)
  • 1.378 (1)
  • 1.5 (1)
  • 1.5354 (1)
  • 1.5559 (1)
  • 1.61 (1)
  • 1.772 (1)
  • 1.929 (1)
  • 1.9685 (1)
  • 2.0 (1)
  • 3.11 (1)
  • 3.5 (1)
to
Tool Cutting Edge Angle
  • 90.0 (58)
to
Cutting Edges Per Insert
  • 1.0 (55)
  • 2.0 (31)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 3.175 (9)
  • 4.7625 (17)
  • 6.35 (60)
to
Corner Radius
  • 0.125 (9)
  • 0.1875 (17)
  • 0.25 (60)
to
application
Minimum Feed
Minimum Feed
Drilling Condition
  • Smooth Cut (1)
Grade Of Cutting Tool
  • K090 (1)
  • K313 (1)
  • KC730 (1)
  • KC850 (1)
  • KY1525 (1)
  • KY1540 (20)
  • KY1615 (3)
  • KY2000 (2)
  • KY2100 (19)
  • KY4300 (3)
  • KY4400 (1)
  • KYHS10 (30)
  • KYS25 (3)
  • KYS30 (51)
  • KYSM10 (30)
  • KYSP30 (47)
Wiper Insert
  • N (44)
Maximum Ramp Angle
  • 0.3 (1)
  • 0.5 (3)
  • 0.8 (1)
  • 1.0 (2)
  • 1.4 (1)
  • 1.5 (1)
  • 1.95 (1)
  • 2.0 (2)
  • 2.5 (1)
  • 2.87 (1)
  • 3.0 (4)
  • 4.2 (1)
  • 4.233 (1)
  • 4.25 (2)
  • 8.0 (4)
  • 10.0 (3)
  • 12.0 (1)
  • 13.0 (2)
  • 14.0 (1)
to
frontEnd
Insert Shape
  • R-ROUND (86)
insertGeometry
Shape
  • R-ROUND (44)
Insert IC Size
  • 0.25 (4)
  • 0.375 (11)
  • 0.5 (29)
to
Insert IC Size
  • 6.35 (4)
  • 9.525 (11)
  • 12.7 (29)
to
Cutting Tool Material
  • C A (8)
  • C N (33)
  • H W (3)
Chip Breaker CBMD
  • GN (4)
Tolerance Class
  • G (44)
backEnd
Back-End Diameter
  • 0.625 (1)
  • 0.6299 (3)
  • 0.7087 (2)
  • 0.75 (10)
  • 0.7874 (2)
  • 0.8268 (2)
  • 0.8661 (2)
  • 0.8666 (5)
  • 0.867 (1)
  • 0.9843 (1)
  • 1.0 (5)
  • 1.063 (4)
  • 1.0634 (1)
  • 1.14 (1)
  • 1.1417 (1)
  • 1.25 (5)
  • 1.2598 (3)
  • 1.26 (3)
  • 1.5 (2)
  • 1.5748 (4)
to
Back-End Diameter
  • 15.875 (1)
  • 16.0 (3)
  • 18.0 (2)
  • 19.05 (10)
  • 20.0 (2)
  • 21.0 (2)
  • 22.0 (8)
  • 25.0 (1)
  • 25.4 (5)
  • 27.0 (5)
  • 29.0 (2)
  • 31.74 (1)
  • 31.75 (4)
  • 32.0 (6)
  • 38.1 (2)
  • 40.0 (4)
to
other
Grade
  • K090 (1)
  • K313 (1)
  • KC730 (1)
  • KC850 (1)
  • KY1525 (1)
  • KY1540 (4)
  • KY1615 (3)
  • KY2000 (2)
  • KY2100 (3)
  • KY4300 (3)
  • KY4400 (1)
  • KYHS10 (3)
  • KYS25 (3)
  • KYS30 (9)
  • KYSM10 (3)
  • KYSP30 (5)
Platform
  • Ceramic Mills (67)
  • Kendex (23)
Tool Unit
  • I (69)
  • M (77)
Over All Length [L]
  • 44.45 (4)
  • 45.0 (5)
  • 50.0 (15)
  • 50.8 (11)
  • 53.75 (1)
  • 57.0 (1)
  • 62.6 (1)
  • 63.0 (4)
  • 69.5 (1)
  • 74.93 (1)
  • 75.0 (1)
  • 81.28 (1)
  • 82.0 (2)
  • 96.0 (1)
  • 96.52 (1)
  • 101.6 (3)
  • 110.0 (3)
  • 139.7 (2)
to
Over All Length [L]
  • 1.75 (4)
  • 1.7717 (5)
  • 1.9685 (11)
  • 1.969 (4)
  • 2.0 (11)
  • 2.1161 (1)
  • 2.244 (1)
  • 2.4646 (1)
  • 2.48 (2)
  • 2.4803 (2)
  • 2.7362 (1)
  • 2.95 (1)
  • 2.953 (1)
  • 3.2 (1)
  • 3.228 (2)
  • 3.78 (1)
  • 3.8 (1)
  • 4.0 (3)
  • 4.3307 (2)
  • 4.331 (1)
  • 5.5 (2)
to
Head Length [L2]
  • 23.711 (1)
  • 23.969 (1)
  • 25.93 (1)
  • 26.0 (1)
  • 30.0 (2)
  • 30.28 (1)
  • 31.0 (2)
  • 31.75 (1)
  • 35.0 (1)
  • 38.1 (1)
  • 39.0 (1)
  • 39.52 (1)
  • 40.9 (1)
  • 45.0 (1)
  • 49.0 (1)
  • 50.0 (1)
  • 79.0 (1)
  • 88.9 (1)
to
Head Length [L2]
  • 0.9335 (1)
  • 0.9436 (1)
  • 1.0209 (1)
  • 1.0236 (1)
  • 1.181 (2)
  • 1.1921 (1)
  • 1.2205 (2)
  • 1.25 (1)
  • 1.378 (1)
  • 1.5 (1)
  • 1.5354 (1)
  • 1.5559 (1)
  • 1.61 (1)
  • 1.772 (1)
  • 1.929 (1)
  • 1.9685 (1)
  • 2.0 (1)
  • 3.11 (1)
  • 3.5 (1)
to
Insert Hand
  • N (44)
Drilling Condition Material
  • H-All (1)
Cutting Condition Material
  • H-All (1)
Maximum Depth of Cut
Maximum Depth of Cut
No filters matching ""
View Products in
Metric
Inch
KSSR — RN

Frezy składane nasadzane o wysokiej wydajności
(9 Products)
  • Face MillingFace Milling
  • Slotting: Ball NoseSlotting: Ball Nose
  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
  • Milling - Side and FaceMilling - Side and Face
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Gage Insert Weight Pounds
1244357 4.00604R232 4.00604R232 63.0000 2.480 50.3000 1.980 22.0 .8661 42.0000 1.653 50.0000 1.968 3.0000 .1181 4   RN__1207 1.54
    1191204 4.00805R232 4.00805R232 80.0000 3.150 67.3000 2.650 27.0 1.063 50.0000 1.968 50.0000 1.968 3.0000 .1181 5   RN__1207 2.86
      1244360 4.01006R232 4.01006R232 100.0000 3.937 87.3000 3.437 32.0 1.259 60.0000 2.362 50.0000 1.968 3.0000 .1181 6   RN__1207 4.18
        1244361 4.01207R232 4.01207R232 125.0000 4.921 112.3000 4.421 40.0 1.574 75.0000 2.952 63.0000 2.480 3.0000 .1181 7   RN__1207 6.82
          1244364 4.01609R232 4.01609R232 160.0000 6.299 147.3000 5.799 40.0 1.574 75.0000 2.952 63.0000 2.480 3.0000 .1181 9   RN__1207 9.24
            1775730 KDNR200RN40C3 KDNR200RN40C3 50.8000 2.000 38.1200 1.501 19.05 .75 44.4500 1.750 50.8000 2.000 6.3200 .2490 3 13700 RNGN12__ 0.96
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Kennametal Ceramic Round — KCRA

              Cylindrical End Mills
              (1 Products)
              • Face MillingFace Milling
              • Shank - Cylindrical  PlainShank - Cylindrical Plain
              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
              • Milling - Pressurized Air CoolantMilling - Pressurized Air Coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Weight Pounds Gage Insert
              5703935 KCRA150RN4303C125L400 KCRA150RN4303C125L400 38.1000 1.500 25.4000 1.000 31.74 1.25 101.6000 4.000 23.7110 .9335 6.3500 .2500 3 28700 1.30 RNGN120400
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                Kennametal Ceramic Round — KCRA

                Face Mills
                (6 Products)
                • Face MillingFace Milling
                • Milling - Side and FaceMilling - Side and Face
                • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                • Milling - Pressurized Air CoolantMilling - Pressurized Air Coolant
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Weight Pounds Gage Insert
                5703936 KCRA200RN4304S075L175 KCRA200RN4304S075L175 50.8000 2.000 38.1000 1.500 19.05 .75 42.0000 1.653 44.4500 1.750 6.3500 .2500 4 23400 0.97 RNGN120400
                  5703937 KCRA200RN4306S075L175 KCRA200RN4306S075L175 50.8000 2.000 38.1000 1.500 19.05 .75 42.0000 1.653 44.4500 1.750 6.3500 .2500 6 23400 0.92 RNGN120400
                    5703938 KCRA250RN4306S075L175 KCRA250RN4306S075L175 63.5000 2.500 50.8000 2.000 19.05 .75 44.4500 1.750 44.4500 1.750 6.3500 .2500 6 20300 1.39 RNGN120400
                      5703939 KCRA250RN4309S075L175 KCRA250RN4309S075L175 63.5000 2.500 50.8000 2.000 19.05 .75 44.4500 1.750 44.4500 1.750 6.3500 .2500 9 20300 1.31 RNGN120400
                        5704050 KCRA300RN4308S100L200 KCRA300RN4308S100L200 76.2000 3.000 63.5000 2.500 25.4 1.0 69.8500 2.750 50.8000 2.000 6.3500 .2500 8 18100 2.89 RNGN120400
                          5704051 KCRA300RN4311S100L200 KCRA300RN4311S100L200 76.2000 3.000 63.5000 2.500 25.4 1.0 69.8500 2.750 50.8000 2.000 6.3500 .2500 11 18100 2.82 RNGN120400
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty
                            Okrągłe płytki ceramiczne Kennametal • KCRA

                            Frezy trzpieniowe z chwytem walcowym
                            (1 Products)
                            • Face MillingFace Milling
                            • Shank - Cylindrical  PlainShank - Cylindrical Plain
                            • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                            • Milling - Pressurized Air CoolantMilling - Pressurized Air Coolant
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM Gage Insert
                            5704053 KCRA40Z03A32RN12 KCRA40Z03A32RN12 40.0000 1.574 27.3000 1.074 32.0 1.26 110.0000 4.330 23.9690 .9436 6.3500 .2500 3 0.67 27700 RNGN120400
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              Okrągłe płytki ceramiczne Kennametal • KCRA

                              Frezy nasadzane
                              (7 Products)
                              • Face MillingFace Milling
                              • Milling - Side and FaceMilling - Side and Face
                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                              • Milling - Pressurized Air CoolantMilling - Pressurized Air Coolant
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM Gage Insert
                              6002128 KCRA40Z04S22RN12 KCRA40Z04S22RN12 40.0000 1.574 27.3000 1.074 22.0 .8666 38.0000 1.496 45.0000 1.771 6.3500 .2500 4 0.27 23700 RNGN120400
                                5704054 KCRA50Z04S22RN12 KCRA50Z04S22RN12 50.0000 1.968 37.3000 1.468 22.0 .8666 42.0000 1.653 45.0000 1.771 6.3500 .2500 4 0.40 23700 RNGN120400
                                  5704055 KCRA50Z06S22RN12 KCRA50Z06S22RN12 50.0000 1.968 37.3000 1.468 22.0 .8666 42.0000 1.653 45.0000 1.771 6.3500 .2500 6 0.38 23700 RNGN120400
                                    5704056 KCRA63Z06S22RN12 KCRA63Z06S22RN12 63.0000 2.480 50.3000 1.980 22.0 .8666 49.0000 1.929 45.0000 1.771 6.3500 .2500 6 0.64 20400 RNGN120400
                                      5704057 KCRA63Z09S22RN12 KCRA63Z09S22RN12 63.0000 2.480 50.3000 1.980 22.0 .8666 49.0000 1.929 45.0000 1.771 6.3500 .2500 9 0.61 20400 RNGN120400
                                        5704058 KCRA80Z08S27RN12 KCRA80Z08S27RN12 80.0000 3.149 67.3000 2.649 27.0 1.063 60.0000 2.362 50.0000 1.968 6.3500 .2500 8 1.18 17600 RNGN120400
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty
                                          KIPR-RP RPGN..

                                          Frezy trzpieniowe z chwytem walcowym
                                          (6 Products)
                                          • Ramping: BlankRamping: Blank
                                          • Slotting: Ball NoseSlotting: Ball Nose
                                          • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                          • 3D Profiling3D Profiling
                                          • PocketingPocketing
                                          • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [L3] Usable Length [L3] Usable Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Coolant Supply Maximum Ramping Angle Weight Kilograms Max RPM Gage Insert
                                          3617418 KIPR016RP06CF02 KIPR016RP06CF02 16.0000 .6290 9.6500 .3799 16.0 .6299 75.0000 2.953 26.0000 1.023     3.1750 .1250 2 Y 14.000 0.10 37260 RP_N0602___
                                            3617416 KIPR020RP06CF03 KIPR020RP06CF03 20.0000 .7870 13.6500 .5374 20.0 .7874 82.0000 3.228 31.0000 1.220     3.1750 .1250 3 Y 10.000 0.17 33325 RP_N0602___
                                              4052780 KIPR020RP09CF02 KIPR020RP09CF02 20.0000 .7870 10.5000 .4134 20.0 .7874 82.0000 3.228 31.0000 1.220     4.7500 .1870 2 Y 13.000 0.16 23040 RP_N0903___
                                                3617415 KIPR025RP09CF03 KIPR025RP09CF03 25.0000 .9840 15.5000 .6102 25.0 .9843 96.0000 3.780 39.0000 1.535     4.7500 .1870 3 Y 8.000 0.30 20610 RP_N0903___
                                                  3101754 KIPR032RP12CF03 KIPR032RP12CF03 32.0000 1.259 19.5700 .7700 32.0 1.259 110.0000 4.330 50.0000 1.968 50.0000 1.968 6.3260 .2490 3 Y 4.233 0.56 20420 RP_N1204___
                                                    3101755 KIPR040RP12CF04 KIPR040RP12CF04 40.0000 1.575 27.4500 1.081 32.0 1.26 110.0000 4.331 49.0000 1.929 49.000 1.929 6.3300 .2490 4 Y 2.870 0.62 18260 RP_N1204___
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty
                                                      KIPR-RP RPGN..

                                                      Frezy trzpieniowe z chwytem gwintowanym
                                                      (4 Products)
                                                      • Ramping: BlankRamping: Blank
                                                      • Slotting: Ball NoseSlotting: Ball Nose
                                                      • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                      • 3D Profiling3D Profiling
                                                      • PocketingPocketing
                                                      • Shank - Screw-OnShank - Screw-On
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Weight Kilograms Max RPM Gage Insert
                                                      4052781 KIPR020RP06MF03 KIPR020RP06MF03 20.0000 .7870 13.6500 .5370 18.0 .7087 10.5000 .4130 M10 30.0000 1.181 14.0000 .5510 3.1800 .1250 3 10.000 0.05 33325 RP_N0602___
                                                        4052782 KIPR020RP09MF02 KIPR020RP09MF02 20.0000 .7870 10.5000 .4120 18.0 .7087 10.5000 .4130 M10 30.0000 1.181 14.0000 .5510 4.7500 .1870 2 13.000 0.05 23040 RP_N0903___
                                                          4052843 KIPR025RP09MF03 KIPR025RP09MF03 25.0000 .9840 15.5000 .6100 21.0 .8268 12.5000 .4920 M12 35.0000 1.378 18.0000 .7090 4.7500 .1870 3 8.000 0.08 20610 RP_N0903___
                                                            3101753 KIPR032RP12MF03 KIPR032RP12MF03 32.0000 1.260 19.4600 .7660 29.0 1.14 17.0000 .6690 M16 45.0000 1.772 22.0000 .8640 6.3300 .2490 3 4.200 0.19 20420 RP_N1204__
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              KIPR-RP RPGN06

                                                              Frezy wysokowydajne • Metryczne
                                                              (7 Products)
                                                              • Ramping: BlankRamping: Blank
                                                              • Slotting: Ball NoseSlotting: Ball Nose
                                                              • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                              • 3D Profiling3D Profiling
                                                              • PocketingPocketing
                                                              • Shank - Cylindrical  PlainShank - Cylindrical Plain
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Gage Insert Weight Pounds
                                                              3759533 KIPR062RP21229 KIPR062RP21229 15.8750 .6250 9.5250 .3750 15.875 .625 74.9300 2.950 25.9300 1.020 3.1800 .1250 2 12.000 37400 RP_2150_ 0.21