Read More

Mill 4-11™ - 90° shoulder milling to the extreme

The Mill 4-11 Series is specially engineered to achieve excellent surface quality and higher metal removal rates in shoulder milling applications. Its unique design allows you to apply the tool in multiple passes (step down) with outstanding results. From roughing to finishing operations, the Mill 4-11 series is applicable in a wide range of workpiece materials: steel, cast iron, stainless steel, non-ferrous materials, and high-temp alloys.

  • Double-sided strong insert with 4 cutting edges.
  • High positive geometry for lower cutting forces.
  • Superior wall and surface finish capabilities.
  • Comprehensive offering to cover all applications in all material groups.
Wybierz filtry
Filtry
    Wyświetl filtry w
    Metryczne
    Calowe
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (103)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(98)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(98)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(98)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(98)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(98)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(103)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(103)
    • M Stainless Steel (103)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(103)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(103)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(103)
    • K Cast Iron (93)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(93)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(93)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(93)
    • N Non-Ferrous Materials (65)
      • N1
        Wrought Aluminum (65)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(65)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(65)
    • S High-Temp Alloys (102)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(96)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(96)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(96)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(102)
    • H Hardened Materials (73)
      • H1
        Hardened Materials 44-48 HRC(73)
    Select First Choice
    • BR (17)
    • CN (74)
    • DE (73)
    • GB (45)
    • IN (11)
    • SG (27)
    • US (65)
    Applications
    Applications
    • Face MillingFace Milling (63)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (63)
    • Shoulder MillingShoulder Milling (63)
    • Shoulder RoughingShoulder Roughing (63)
    • Shoulder Square EndShoulder Square End (63)
    • Slot MillingSlot Milling (10)
    • Slot SideSlot Side (10)
    • Slot Square EndSlot Square End (10)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(3)
    • 0.63 in(4)
    • 0.75 in(6)
    • 0.787 in(6)
    • 0.984 in(5)
    • 1.0 in(7)
    • 1.25 in(5)
    • 1.26 in(6)
    • 1.5 in(3)
    • 1.575 in(5)
    • 1.969 in(3)
    • 2.0 in(2)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(3)
    • 16.0 mm(4)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 25.0 mm(5)
    • 25.401 mm(7)
    • 31.75 mm(5)
    • 32.0 mm(6)
    • 38.1 mm(3)
    • 40.0 mm(5)
    • 50.0 mm(3)
    • 50.801 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 11.0 mm(63)
    Cutting Length MindoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.433 in(63)
    Cutting Length MindoCutting Length Max
    Reach
    Reach
    • 0.984 in(4)
    • 1.0 in(3)
    • 1.1 in(6)
    • 1.102 in(6)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.575 in(17)
    • 1.693 in(3)
    • 1.75 in(9)
    • 1.929 in(6)
    • 1.969 in(2)
    • 2.25 in(5)
    Reach MindoReach Max
    Reach
    Reach
    • 25.0 mm(4)
    • 25.401 mm(3)
    • 27.951 mm(6)
    • 28.0 mm(6)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 40.0 mm(17)
    • 43.0 mm(3)
    • 44.45 mm(9)
    • 49.0 mm(6)
    • 50.0 mm(2)
    • 57.151 mm(5)
    Reach MindoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (63)
    Tool Cutting Edge Angle MindoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (18)
    • Screw-On Connection (8)
    • Straight-Cylindrical (24)
    • Weldon (13)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 2 (11)
    • 3 (13)
    • 4 (12)
    • 5 (12)
    • 6 (4)
    • 7 (5)
    • 8 (3)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(14)
    • 1.681 in(1)
    • 1.75 in(2)
    • 1.889 in(1)
    • 1.891 in(1)
    • 1.969 in(2)
    • 2.116 in(1)
    • 2.441 in(1)
    • 2.539 in(2)
    • 2.715 in(1)
    • 2.906 in(1)
    • 2.914 in(1)
    • 3.11 in(2)
    • 3.13 in(2)
    • 3.504 in(1)
    • 3.543 in(2)
    • 3.781 in(1)
    • 3.938 in(1)
    • 4.0 in(2)
    • 4.03 in(1)
    • 4.331 in(3)
    • 4.5 in(2)
    • 4.53 in(2)
    • 5.0 in(2)
    • 5.906 in(3)
    • 6.0 in(3)
    • 6.694 in(2)
    • 7.0 in(2)
    • 7.875 in(3)
    • 8.0 in(1)
    Over All Length [L] MindoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(14)
    • 42.7 mm(1)
    • 44.45 mm(2)
    • 47.95 mm(1)
    • 48.0 mm(1)
    • 50.0 mm(2)
    • 53.75 mm(1)
    • 62.0 mm(1)
    • 64.5 mm(2)
    • 68.95 mm(1)
    • 73.8 mm(1)
    • 74.0 mm(1)
    • 79.0 mm(2)
    • 79.5 mm(2)
    • 89.0 mm(1)
    • 90.0 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(2)
    • 102.351 mm(1)
    • 110.0 mm(3)
    • 114.301 mm(2)
    • 115.051 mm(2)
    • 127.0 mm(2)
    • 150.0 mm(3)
    • 152.4 mm(3)
    • 170.0 mm(2)
    • 177.8 mm(2)
    • 200.0 mm(3)
    • 203.201 mm(1)
    Over All Length [L] MindoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(70)
    • 0.031 in(91)
    • 0.047 in(76)
    • 0.063 in(72)
    Corner Radius MindoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(70)
    • 0.8 mm(91)
    • 1.201 mm(76)
    • 1.6 mm(72)
    Corner Radius MindoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (65)
    • KC520M (68)
    • KC522M (72)
    • KC725M (69)
    • KCK15 (69)
    • KCK20B (67)
    • KCPK30 (69)
    • KCPM20 (64)
    • KCPM40 (75)
    • KCSM30 (64)
    • KCSM40 (68)
    Hand Of Tool
    Hand Of Tool
    • R (63)
    Wiper Insert
    Wiper Insert
    • N (57)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.74 in(1)
    • 1.23 in(1)
    • 1.24 in(2)
    Neck Diameter MindoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 18.8 mm(1)
    • 31.25 mm(1)
    • 31.5 mm(2)
    Neck Diameter MindoNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • X-RECTANGLE MILL 4 90 (57)
    Cutting Edge Length
    Cutting Edge Length
    • 12.101 mm(20)
    • 12.175 mm(37)
    Cutting Edge Length MindoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.477 in(20)
    • 0.48 in(37)
    Cutting Edge Length MindoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GE (40)
    • GEM (15)
    • LE (2)
    Cutting Tool Material
    Cutting Tool Material
    • H W (57)
    Tolerance Class
    Tolerance Class
    • G (37)
    • P (20)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (37)
    • SCREW-ON (8)
    • SHELL MILL (18)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(2)
    • 13.0 mm(1)
    • 15.875 mm(3)
    • 16.0 mm(6)
    • 18.0 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(9)
    • 20.0 mm(5)
    • 21.0 mm(2)
    • 22.0 mm(5)
    • 25.0 mm(4)
    • 25.401 mm(7)
    • 27.0 mm(2)
    • 29.0 mm(3)
    • 31.75 mm(5)
    • 32.0 mm(6)
    Back-End Diameter MindoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.512 in(1)
    • 0.625 in(3)
    • 0.63 in(6)
    • 0.709 in(2)
    • 0.748 in(1)
    • 0.75 in(9)
    • 0.787 in(5)
    • 0.828 in(2)
    • 0.866 in(5)
    • 0.984 in(4)
    • 1.0 in(7)
    • 1.063 in(2)
    • 1.143 in(3)
    • 1.25 in(5)
    • 1.26 in(6)
    Back-End Diameter MindoBack-End Diameter Max
    No filters matching ""
    Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
    Select the destination where you want to move do.
    Nowe Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Oznaczenie katalogowe ISO

    Oznaczenie katalogowe ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
    Session expired due to inactivity, please login again
    Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
    produkty dodane do koszyka

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberOznaczenie katalogowe ISOGatunek  

    You are about to leave the Solution building process.

    Are you sure you want to leave?