Cutters KNS® • Metric

Wybierz filtry
Filtry
    Wyświetl filtry w
    Metryczne
    Calowe
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (37)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(37)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(37)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(37)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(37)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(37)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(37)
    • M Stainless Steel (37)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(37)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(37)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(37)
    • K Cast Iron (37)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(37)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(37)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(37)
    • N Non-Ferrous Materials (37)
      • N1
        Wrought Aluminum (37)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(37)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(37)
    • S High-Temp Alloys (37)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(37)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(37)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(37)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(37)
    Applications
    Applications
    • Slot MillingSlot Milling (37)
    • Slot SideSlot Side (37)
    • Slot Square EndSlot Square End (37)
    Cutting Diameter
    Cutting Diameter
    • 2.48 in(1)
    • 3.15 in(2)
    • 3.938 in(10)
    • 4.921 in(11)
    • 6.299 in(5)
    • 7.875 in(5)
    • 9.843 in(3)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 63.0 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(10)
    • 125.0 mm(11)
    • 160.0 mm(5)
    • 200.0 mm(5)
    • 250.0 mm(3)
    Cutting Diameter MindoCutting Diameter Max
    Reach
    Reach
    • 2.0 in(1)
    • 2.011 in(1)
    • 2.039 in(1)
    • 2.415 in(1)
    • 2.43 in(1)
    • 2.445 in(1)
    • 2.463 in(1)
    Reach MindoReach Max
    Reach
    Reach
    • 50.801 mm(1)
    • 51.051 mm(1)
    • 51.801 mm(1)
    • 61.35 mm(1)
    • 61.7 mm(1)
    • 62.1 mm(1)
    • 62.551 mm(1)
    Reach MindoReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (7)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 11 (4)
    • 12 (1)
    • 13 (3)
    • 14 (1)
    • 15 (2)
    • 17 (3)
    • 4 (1)
    • 5 (3)
    • 6 (4)
    • 7 (6)
    • 8 (5)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (32)
    • 2.0 (31)
    Cutting Edges Per Insert MindoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 2.0 in(1)
    • 2.011 in(1)
    • 2.039 in(1)
    • 2.415 in(1)
    • 2.43 in(1)
    • 2.445 in(1)
    • 2.463 in(1)
    Over All Length [L] MindoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.801 mm(1)
    • 51.051 mm(1)
    • 51.801 mm(1)
    • 61.35 mm(1)
    • 61.7 mm(1)
    • 62.1 mm(1)
    • 62.551 mm(1)
    Over All Length [L] MindoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(9)
    • 0.008 in(20)
    • 0.012 in(12)
    • 0.016 in(6)
    • 0.06 in(5)
    • 0.063 in(5)
    • 0.079 in(6)
    Corner Radius MindoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(9)
    • 0.2 mm(20)
    • 0.301 mm(12)
    • 0.4 mm(6)
    • 1.5 mm(5)
    • 1.6 mm(5)
    • 2.0 mm(6)
    Corner Radius MindoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC522M (37)
    • KCPK30 (37)
    • KCPM40 (37)
    • KCU25 (37)
    Hand Of Tool
    Hand Of Tool
    • N (30)
    • R (7)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.063 in(5)
    • 0.079 in(4)
    • 0.088 in(4)
    • 0.095 in(4)
    • 0.098 in(5)
    • 0.119 in(5)
    • 0.125 in(5)
    • 0.157 in(6)
    • 0.188 in(6)
    • 0.197 in(6)
    • 0.237 in(6)
    • 0.25 in(6)
    Cutting Width MindoCutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(5)
    • 2.0 mm(4)
    • 2.2 mm(4)
    • 2.401 mm(4)
    • 2.5 mm(5)
    • 3.0 mm(5)
    • 3.176 mm(5)
    • 4.0 mm(6)
    • 4.775 mm(6)
    • 5.0 mm(6)
    • 6.0 mm(6)
    • 6.351 mm(6)
    Cutting Width MindoCutting Width Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.376 in(5)
    • 0.972 in(3)
    • 1.012 in(3)
    • 1.051 in(1)
    • 1.131 in(1)
    • 1.268 in(5)
    • 1.504 in(6)
    • 2.008 in(5)
    • 2.795 in(5)
    • 3.781 in(3)
    Maximum Cutting Depth MindoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 9.55 mm(5)
    • 24.701 mm(3)
    • 25.701 mm(3)
    • 26.701 mm(1)
    • 28.701 mm(1)
    • 32.2 mm(5)
    • 38.2 mm(6)
    • 51.0 mm(5)
    • 71.0 mm(5)
    • 96.0 mm(3)
    Maximum Cutting Depth MindoMaximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 7.601 mm(5)
    • 9.175 mm(4)
    • 11.55 mm(5)
    • 12.675 mm(6)
    • 12.75 mm(6)
    • 14.5 mm(6)
    • 14.525 mm(6)
    • 14.75 mm(5)
    Maximum Cutting Insert Depth MindoMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.299 in(5)
    • 0.361 in(4)
    • 0.455 in(5)
    • 0.499 in(6)
    • 0.502 in(6)
    • 0.572 in(6)
    • 0.573 in(6)
    • 0.581 in(5)
    Maximum Cutting Insert Depth MindoMaximum Cutting Insert Depth Max
    backEnd
    Connection Type
    Connection Type
    • ARBOR (30)
    • SHELL MILL (7)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(2)
    • 22.0 mm(9)
    • 27.0 mm(2)
    • 32.0 mm(11)
    • 40.0 mm(13)
    Back-End Diameter MindoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(2)
    • 0.866 in(9)
    • 1.063 in(2)
    • 1.26 in(11)
    • 1.575 in(13)
    Back-End Diameter MindoBack-End Diameter Max
    No filters matching ""
    Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
    product-image
    Please adjust the following properties from

    Oznaczenie katalogowe ISO

    Oznaczenie katalogowe ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
    Session expired due to inactivity, please login again
    Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
    produkty dodane do koszyka

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberOznaczenie katalogowe ISOGatunek  

    You are about to leave the Solution building process.

    Are you sure you want to leave?