Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Wysokowydajne monolityczne frezy trzpieniowe z węglików spiekanych

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2511)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1825)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1825)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1854)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2051)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2391)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2319)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1857)
  • M Stainless Steel (2179)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2179)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2179)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2170)
  • K Cast Iron (1886)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1886)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1886)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1848)
  • N Non-Ferrous Materials (630)
    • N1
      Wrought Aluminum
      (599)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (599)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (502)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (502)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (213)
    • N6
      Carbon, Graphite Composites, CFRP
      (62)
    • N7
      MMC's
      (44)
  • S High-Temp Alloys (1868)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1814)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1776)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1831)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1762)
  • H Hardened Materials (2472)
    • H1
      Hardened Materials 44-48 HRC
      (2460)
    • H2
      Hardened Materials 48-55 HRC
      (1090)
    • H3
      Hardened Materials 56-60 HRC
      (238)
    • H4
      Hardened Materials >60 HRC
      (183)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (31)
  • CN (365)
  • DE (340)
  • GB (141)
  • IN (48)
  • SG (102)
  • US (746)
Applications
Applications
  • Drilling Drilling (247)
  • Face Milling Face Milling (818)
  • Pocket Pocket (2569)
  • Pocket Helical Pocket Helical (2714)
  • Pocket Milling Pocket Milling (2734)
  • Pocket Plunge Milling Pocket Plunge Milling (1038)
  • Profile Milling Profile Milling (319)
  • Ramping Ramping (2524)
  • Shoulder Ball Nose Shoulder Ball Nose (555)
  • Shoulder Milling Shoulder Milling (2923)
  • Shoulder Roughing Shoulder Roughing (1066)
  • Shoulder Square End Shoulder Square End (2716)
  • Slot Ball Nose Slot Ball Nose (141)
  • Slot Milling Slot Milling (2184)
  • Slot Square End Slot Square End (2134)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.012 in (2)
  • 0.016 in (2)
  • 0.02 in (5)
  • 0.024 in (5)
  • 0.031 in (5)
  • 0.039 in (9)
  • 0.047 in (4)
  • 0.055 in (2)
  • 0.06 in (8)
  • 0.063 in (5)
  • 0.072 in (4)
  • 0.078 in (4)
  • 0.079 in (31)
  • 0.094 in (4)
  • 0.095 in (1)
  • 0.098 in (16)
  • 0.109 in (1)
  • 0.11 in (3)
  • 0.119 in (31)
  • 0.125 in (31)
  • 0.138 in (10)
  • 0.15 in (3)
  • 0.156 in (7)
  • 0.157 in (63)
  • 0.187 in (1)
  • 0.188 in (49)
  • 0.189 in (3)
  • 0.197 in (48)
  • 0.219 in (4)
  • 0.226 in (3)
  • 0.237 in (115)
  • 0.25 in (141)
  • 0.276 in (6)
  • 0.281 in (4)
  • 0.303 in (1)
  • 0.305 in (3)
  • 0.312 in (1)
  • 0.313 in (63)
  • 0.315 in (126)
  • 0.345 in (1)
  • 0.354 in (5)
  • 0.375 in (201)
  • 0.382 in (5)
  • 0.394 in (183)
  • 0.437 in (3)
  • 0.438 in (21)
  • 0.461 in (3)
  • 0.473 in (192)
  • 0.5 in (339)
  • 0.539 in (4)
  • 0.551 in (39)
  • 0.564 in (3)
  • 0.618 in (3)
  • 0.625 in (179)
  • 0.63 in (183)
  • 0.698 in (3)
  • 0.709 in (21)
  • 0.75 in (302)
  • 0.776 in (3)
  • 0.787 in (169)
  • 0.984 in (129)
  • 1.0 in (271)
  • 1.25 in (80)
  • 1.26 in (2)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.969 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.301 mm (2)
  • 0.4 mm (2)
  • 0.5 mm (5)
  • 0.601 mm (5)
  • 0.8 mm (5)
  • 1.0 mm (9)
  • 1.201 mm (4)
  • 1.401 mm (2)
  • 1.5 mm (8)
  • 1.6 mm (5)
  • 1.8 mm (4)
  • 1.975 mm (4)
  • 2.0 mm (31)
  • 2.375 mm (4)
  • 2.401 mm (1)
  • 2.5 mm (16)
  • 2.776 mm (1)
  • 2.801 mm (3)
  • 3.0 mm (31)
  • 3.176 mm (31)
  • 3.5 mm (10)
  • 3.801 mm (3)
  • 3.95 mm (2)
  • 3.975 mm (5)
  • 4.0 mm (63)
  • 4.75 mm (1)
  • 4.775 mm (49)
  • 4.801 mm (3)
  • 5.0 mm (48)
  • 5.551 mm (4)
  • 5.75 mm (3)
  • 6.0 mm (115)
  • 6.351 mm (141)
  • 7.0 mm (6)
  • 7.15 mm (4)
  • 7.7 mm (1)
  • 7.75 mm (3)
  • 7.926 mm (1)
  • 7.95 mm (63)
  • 8.0 mm (126)
  • 8.725 mm (1)
  • 9.0 mm (5)
  • 9.525 mm (201)
  • 9.701 mm (5)
  • 10.0 mm (183)
  • 11.101 mm (3)
  • 11.125 mm (21)
  • 11.701 mm (3)
  • 12.0 mm (192)
  • 12.701 mm (339)
  • 13.701 mm (4)
  • 14.0 mm (39)
  • 14.3 mm (3)
  • 15.701 mm (3)
  • 15.875 mm (179)
  • 16.0 mm (183)
  • 17.7 mm (3)
  • 18.0 mm (21)
  • 19.05 mm (302)
  • 19.701 mm (3)
  • 20.0 mm (169)
  • 25.0 mm (129)
  • 25.401 mm (271)
  • 31.75 mm (80)
  • 32.0 mm (2)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.45 mm (1)
  • 7.625 mm (1)
  • 7.95 mm (1)
  • 8.625 mm (1)
  • 9.025 mm (1)
  • 9.25 mm (1)
  • 9.625 mm (1)
  • 11.101 mm (1)
  • 11.451 mm (1)
  • 11.625 mm (1)
  • 12.101 mm (1)
  • 13.451 mm (1)
  • 14.625 mm (1)
  • 14.8 mm (1)
  • 14.826 mm (1)
  • 14.925 mm (1)
  • 14.951 mm (1)
  • 15.101 mm (1)
  • 15.175 mm (1)
  • 15.25 mm (1)
  • 15.275 mm (1)
  • 15.351 mm (1)
  • 15.451 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.293 in (1)
  • 0.3 in (1)
  • 0.313 in (1)
  • 0.34 in (1)
  • 0.355 in (1)
  • 0.364 in (1)
  • 0.379 in (1)
  • 0.437 in (1)
  • 0.451 in (1)
  • 0.458 in (1)
  • 0.477 in (1)
  • 0.53 in (1)
  • 0.577 in (1)
  • 0.583 in (1)
  • 0.584 in (1)
  • 0.588 in (1)
  • 0.589 in (1)
  • 0.595 in (1)
  • 0.597 in (1)
  • 0.6 in (1)
  • 0.601 in (1)
  • 0.604 in (1)
  • 0.608 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.2 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (2)
  • 0.4 mm (3)
  • 0.426 mm (3)
  • 0.5 mm (2)
  • 0.525 mm (2)
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.5 mm (9)
  • 1.6 mm (4)
  • 1.8 mm (3)
  • 2.0 mm (12)
  • 2.401 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (13)
  • 3.176 mm (3)
  • 3.2 mm (3)
  • 3.975 mm (6)
  • 4.0 mm (26)
  • 4.775 mm (6)
  • 5.0 mm (28)
  • 5.15 mm (3)
  • 6.0 mm (44)
  • 6.351 mm (15)
  • 6.75 mm (4)
  • 7.0 mm (16)
  • 7.551 mm (4)
  • 7.95 mm (9)
  • 8.0 mm (43)
  • 8.326 mm (4)
  • 9.0 mm (32)
  • 9.525 mm (44)
  • 10.0 mm (34)
  • 10.726 mm (4)
  • 11.0 mm (30)
  • 11.125 mm (8)
  • 12.0 mm (58)
  • 12.3 mm (5)
  • 12.701 mm (81)
  • 13.0 mm (64)
  • 14.0 mm (12)
  • 14.3 mm (10)
  • 15.0 mm (59)
  • 15.875 mm (116)
  • 16.0 mm (46)
  • 18.0 mm (65)
  • 19.0 mm (35)
  • 19.05 mm (122)
  • 20.0 mm (18)
  • 20.625 mm (3)
  • 20.651 mm (3)
  • 22.0 mm (67)
  • 22.225 mm (73)
  • 23.826 mm (5)
  • 24.0 mm (67)
  • 25.0 mm (10)
  • 25.401 mm (156)
  • 26.0 mm (99)
  • 28.576 mm (33)
  • 30.0 mm (69)
  • 30.175 mm (3)
  • 31.701 mm (4)
  • 31.75 mm (188)
  • 32.0 mm (102)
  • 36.0 mm (27)
  • 37.5 mm (29)
  • 38.0 mm (81)
  • 38.1 mm (209)
  • 39.0 mm (3)
  • 39.7 mm (3)
  • 40.0 mm (14)
  • 41.276 mm (59)
  • 42.0 mm (3)
  • 44.45 mm (36)
  • 45.0 mm (66)
  • 47.625 mm (27)
  • 48.0 mm (20)
  • 50.0 mm (10)
  • 50.801 mm (75)
  • 53.975 mm (4)
  • 57.151 mm (94)
  • 60.0 mm (26)
  • 63.5 mm (35)
  • 66.675 mm (7)
  • 75.0 mm (18)
  • 76.2 mm (82)
  • 79.375 mm (10)
  • 80.0 mm (10)
  • 82.551 mm (15)
  • 88.9 mm (14)
  • 95.25 mm (9)
  • 100.0 mm (10)
  • 101.601 mm (44)
  • 114.301 mm (10)
  • 125.0 mm (9)
  • 127.0 mm (24)
  • 139.701 mm (6)
  • 152.4 mm (11)
  • 165.101 mm (9)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.008 in (2)
  • 0.012 in (2)
  • 0.014 in (3)
  • 0.016 in (3)
  • 0.017 in (3)
  • 0.02 in (2)
  • 0.021 in (2)
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.06 in (9)
  • 0.063 in (4)
  • 0.072 in (3)
  • 0.079 in (12)
  • 0.095 in (3)
  • 0.098 in (3)
  • 0.119 in (13)
  • 0.125 in (3)
  • 0.126 in (3)
  • 0.156 in (7)
  • 0.157 in (26)
  • 0.188 in (6)
  • 0.197 in (28)
  • 0.203 in (3)
  • 0.237 in (44)
  • 0.25 in (15)
  • 0.266 in (4)
  • 0.276 in (16)
  • 0.297 in (4)
  • 0.313 in (9)
  • 0.315 in (43)
  • 0.328 in (4)
  • 0.354 in (32)
  • 0.375 in (44)
  • 0.394 in (34)
  • 0.422 in (4)
  • 0.433 in (30)
  • 0.438 in (8)
  • 0.473 in (58)
  • 0.484 in (5)
  • 0.5 in (81)
  • 0.512 in (64)
  • 0.551 in (12)
  • 0.564 in (10)
  • 0.591 in (59)
  • 0.625 in (116)
  • 0.63 in (46)
  • 0.709 in (65)
  • 0.748 in (35)
  • 0.75 in (122)
  • 0.787 in (18)
  • 0.812 in (3)
  • 0.814 in (3)
  • 0.866 in (67)
  • 0.875 in (73)
  • 0.939 in (5)
  • 0.946 in (67)
  • 0.984 in (10)
  • 1.0 in (156)
  • 1.024 in (99)
  • 1.125 in (33)
  • 1.181 in (69)
  • 1.188 in (3)
  • 1.248 in (4)
  • 1.25 in (188)
  • 1.26 in (102)
  • 1.417 in (27)
  • 1.476 in (29)
  • 1.496 in (81)
  • 1.5 in (209)
  • 1.536 in (3)
  • 1.563 in (3)
  • 1.575 in (14)
  • 1.625 in (59)
  • 1.655 in (3)
  • 1.75 in (36)
  • 1.772 in (66)
  • 1.875 in (27)
  • 1.891 in (20)
  • 1.969 in (10)
  • 2.0 in (75)
  • 2.125 in (4)
  • 2.25 in (94)
  • 2.362 in (26)
  • 2.5 in (35)
  • 2.625 in (7)
  • 2.953 in (18)
  • 3.0 in (82)
  • 3.125 in (10)
  • 3.15 in (10)
  • 3.25 in (15)
  • 3.5 in (14)
  • 3.75 in (9)
  • 3.938 in (10)
  • 4.0 in (44)
  • 4.5 in (10)
  • 4.921 in (9)
  • 5.0 in (24)
  • 5.5 in (6)
  • 6.0 in (11)
  • 6.5 in (9)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.088 in (3)
  • 0.098 in (3)
  • 0.119 in (3)
  • 0.138 in (3)
  • 0.157 in (4)
  • 0.177 in (5)
  • 0.197 in (6)
  • 0.217 in (3)
  • 0.237 in (11)
  • 0.25 in (9)
  • 0.256 in (3)
  • 0.276 in (5)
  • 0.313 in (7)
  • 0.315 in (11)
  • 0.328 in (3)
  • 0.335 in (4)
  • 0.354 in (11)
  • 0.375 in (20)
  • 0.394 in (12)
  • 0.422 in (3)
  • 0.433 in (10)
  • 0.438 in (6)
  • 0.473 in (25)
  • 0.484 in (4)
  • 0.492 in (3)
  • 0.5 in (55)
  • 0.512 in (28)
  • 0.551 in (5)
  • 0.564 in (8)
  • 0.591 in (13)
  • 0.61 in (8)
  • 0.625 in (65)
  • 0.63 in (41)
  • 0.65 in (4)
  • 0.69 in (8)
  • 0.709 in (54)
  • 0.748 in (19)
  • 0.75 in (92)
  • 0.787 in (9)
  • 0.812 in (3)
  • 0.828 in (5)
  • 0.866 in (29)
  • 0.875 in (63)
  • 0.939 in (5)
  • 0.946 in (43)
  • 0.984 in (11)
  • 1.0 in (79)
  • 1.004 in (5)
  • 1.024 in (35)
  • 1.043 in (6)
  • 1.063 in (3)
  • 1.078 in (4)
  • 1.125 in (21)
  • 1.181 in (78)
  • 1.188 in (3)
  • 1.248 in (4)
  • 1.25 in (140)
  • 1.26 in (45)
  • 1.339 in (6)
  • 1.375 in (6)
  • 1.417 in (91)
  • 1.496 in (30)
  • 1.5 in (149)
  • 1.575 in (9)
  • 1.625 in (49)
  • 1.655 in (19)
  • 1.693 in (4)
  • 1.708 in (6)
  • 1.732 in (5)
  • 1.75 in (18)
  • 1.772 in (20)
  • 1.875 in (13)
  • 1.891 in (88)
  • 1.969 in (5)
  • 2.0 in (46)
  • 2.087 in (18)
  • 2.101 in (7)
  • 2.125 in (12)
  • 2.126 in (4)
  • 2.165 in (6)
  • 2.25 in (126)
  • 2.283 in (13)
  • 2.333 in (7)
  • 2.362 in (92)
  • 2.441 in (4)
  • 2.5 in (28)
  • 2.531 in (6)
  • 2.625 in (5)
  • 2.874 in (44)
  • 2.953 in (84)
  • 3.0 in (44)
  • 3.125 in (6)
  • 3.15 in (6)
  • 3.25 in (38)
  • 3.375 in (23)
  • 3.75 in (6)
  • 3.938 in (7)
  • 4.0 in (16)
  • 4.921 in (4)
  • 5.0 in (5)
Reach Min to Reach Max